Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC 441 G F LIG FLATS PH 2 SEC 14 PKT 3 DWARKA NEW DELHI SECTOR 14 DWARKA DWARKA SOUTH WEST DELHI DELHI 110078 | SOUTH WEST DELHI | DELHI | 110078 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹32.6 L+₹2.6 L (8.69%)Rejected-Finance NEAR PROTHRAPUR COMMUNITY HALL PAHARGAON GARACHARMA POST SRI VIJAYA PURAM 744105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹34.9 L+₹4.9 L (16.3%)Rejected-Finance 10 WARD NO 18 PLOT NO 34 KAMDENU FURNTIURE SIKAR RAJASTHAN 332025 | SIKAR | RAJASTHAN | 332025 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹39.9 L+₹9.9 L (33.1%)Rejected-Finance HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD PIN 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹40.2 L+₹10.2 L (34.0%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
| Sl No | Description | Qty | Unit | national engineering L4 | Vijeta Solutions L5 | OMVIN ENTERPRISES LLP L1 | Ruchi enterprises L3 | D K ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | S & F in replacement of surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen/watt, 50,000 burning hrs, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge. | 300 | Each | 150 ₹45,000 | 330 ₹99,000 | 270 ₹81,000 | 190 ₹57,000 | 123 ₹36,900 Lowest |
| 2.00 | S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen/watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge. | 180 | Each | 1,500 ₹2,70,000 | 1,325 ₹2,38,500 | 950 ₹1,71,000 Lowest | 1,700 ₹3,06,000 | 1,293 ₹2,32,740 |
| 3.00 | S & F in replacement Surface mounted LED Round light fitting 18 watt, Luminaire made up of Pressure die cast Aluminum Housing with PC diffuser, IP20 from dust. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, 50,000 burning hrsPF ≥0.95, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge. | 210 | Each | 590 ₹1,23,900 | 745 ₹1,56,450 | 275 ₹57,750 Lowest | 800 ₹1,68,000 | 350 ₹73,500 |
| 4.00 | S & F in replacement of suspended linear light fixture with customisable length & shape option, linear fixture should be of max 53mm width & min system lumen Output ≥ 2200 lumens for 1200 mm, UGR<19 & luminous efficacy >90-100 lm/watt, prismatic diffuser, Extruded Aluminium Housing, Surge Protection up to 2.5 kV, CCT : 4000/5700/6500 K, CRI>80, THD<10%, SDCM 5, PF>0.95, IP20 & IK02, Useful L70 Life of 50000 hrs @ 45 degrees ambient temperature complete all as specified and directed by Engr-in-Charge. | 15 | RM | 3,000 ₹45,000 | 9,000 ₹1,35,000 | 8,400 ₹1,26,000 | 599 ₹8,985 Lowest | 726 ₹10,890 |
| 5.00 | S & F in replacement ceiling recessed mounting LED SKY Lights luminaire, Printed Customised design (design as per approval by GE), 600 mm x 600 mm, (2' x2'), 36 Watts, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge. | 50 | Each | 2,673 ₹1,33,650 | 2,010 ₹1,00,500 | 2,400 ₹1,20,000 | 2,700 ₹1,35,000 | 1,293 ₹64,650 Lowest |
| 6.00 | S & F in replacement ceiling recessed mounting LED COB Lights, 15 W, with COB LED, flexible to suit for different applications, Aluminium housing for better thermal management. The LEDs used should have CCT 4000K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge. | 45 | Each | 590 ₹26,550 Lowest | 1,710 ₹76,950 | 2,000 ₹90,000 | 900 ₹40,500 | 616 ₹27,720 |
| 7.00 | S & F in replacement ceiling recessed mounting LED COB Lights, 20 W, with COB LED, flexible to suit for different applications, Aluminium housing for better thermal management. The LEDs used should have CCT 4000K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Emgr-in-Charge. | 45 | Each | 973 ₹43,785 | 1,945 ₹87,525 | 2,300 ₹1,03,500 | 1,500 ₹67,500 | 492 ₹22,140 Lowest |
| 8.00 | S & F in replacement Post Top LED Lights, 26 W, Aluminium housing for better thermal management. The LEDs used should have CCT 4000K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection ≥3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge. | 10 | Each | 2,973 ₹29,730 | 3,600 ₹36,000 | 1,900 ₹19,000 Lowest | 4,000 ₹40,000 | 3,696 ₹36,960 |
| 9.00 | S & F in replacement Buliding Security Lights, 25 W, daylight sensor, Aluminium housing, The LEDs used should have CCT 5000K, ≥ 100 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection ≥3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge. | 30 | Each | 1,604 ₹48,120 | 1,355 ₹40,650 Lowest | 1,550 ₹46,500 | 1,700 ₹51,000 | 1,601 ₹48,030 |
| 10.00 | Supply and fix in replacement of energy efficient wall mounted LED bulk head light fitting 10 / 12 watt, Outdoor IP65 day light Sensor LED Bulkhead Light, CW 6500K , PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed by Engr-in-Charge. | 27 | Each | 745 ₹20,115 | 675 ₹18,225 | 800 ₹21,600 | 780 ₹21,060 | 431 ₹11,637 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
7 Apr 2025, 6:00 pmClosed
GE E/M RR HOSPITAL DELHI CANTT-10
GE E/M RR HOSPITAL DELHI CANTT-10
GE/H-81/2024-25 REPAIR / REPLACEMENT OF ELECTRCAL FITTINGS SUCH AS SIGNAGES, LINEAR LIGHTS, DOWNLIGHTS ETC AND SUBMAIN WIRING AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT-10
2025_MES_700909_1
GE/H-81/2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Delhi Cantt-10
As per tender documents
10 documents required · 10 mandatory
₹500
GE E/M RR HOSPITAL
₹90,000
Yes
28 Aug 2025
10 Mar 2025
9 Apr 2025
10 Mar 2025
7 Apr 2025
24 Mar 2025
Amount
S & F in replacement of surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen/watt, 50,000 burning hrs, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge.
S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen/watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge.
S & F in replacement Surface mounted LED Round light fitting 18 watt, Luminaire made up of Pressure die cast Aluminum Housing with PC diffuser, IP20 from dust. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, 50,000 burning hrsPF ≥0.95, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge.
S & F in replacement of suspended linear light fixture with customisable length & shape option, linear fixture should be of max 53mm width & min system lumen Output ≥ 2200 lumens for 1200 mm, UGR<19 & luminous efficacy >90-100 lm/watt, prismatic diffuser, Extruded Aluminium Housing, Surge Protection up to 2.5 kV, CCT : 4000/5700/6500 K, CRI>80, THD<10%, SDCM 5, PF>0.95, IP20 & IK02, Useful L70 Life of 50000 hrs @ 45 degrees ambient temperature complete all as specified and directed by Engr-in-Charge.
S & F in replacement ceiling recessed mounting LED SKY Lights luminaire, Printed Customised design (design as per approval by GE), 600 mm x 600 mm, (2' x2'), 36 Watts, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge.
S & F in replacement ceiling recessed mounting LED COB Lights, 15 W, with COB LED, flexible to suit for different applications, Aluminium housing for better thermal management. The LEDs used should have CCT 4000K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge.
S & F in replacement ceiling recessed mounting LED COB Lights, 20 W, with COB LED, flexible to suit for different applications, Aluminium housing for better thermal management. The LEDs used should have CCT 4000K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Emgr-in-Charge.
S & F in replacement Post Top LED Lights, 26 W, Aluminium housing for better thermal management. The LEDs used should have CCT 4000K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection ≥3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge.
S & F in replacement Buliding Security Lights, 25 W, daylight sensor, Aluminium housing, The LEDs used should have CCT 5000K, ≥ 100 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection ≥3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of energy efficient wall mounted LED bulk head light fitting 10 / 12 watt, Outdoor IP65 day light Sensor LED Bulkhead Light, CW 6500K , PF>0.95 and Voltage rated 220V to 240V etc complete all as specified and directed by Engr-in-Charge.
Supply, Fixing, Testing and Commissioning in replacement of Digital Grounding Device of 240kA, 3 Phase, 4 wire with following test and certifications :- (a) IEC 61643-11-2011 on IEC test format IEC61643_11B (b) Conformation of attestation certificate with test report number and test parametrs mentioned in the certificate (c) High voltage lightning impulse current withstans test of minimum 35 kA, 8/20 micro second by Central Power Research Institute Govt of India (d) Enclosures, Earth to neutral voltage monitoring device, 63Amps MCCB with enclosures with connetion and wiring etc as required.
Supply, Fixing, Testing and Commissioning in replacement of Digital Grounding Device of 120 kA Single phase 2 wire with following test and certifications :- (a) IEC 61643-11-2011 on IEC test format IEC61643_11B (b) Conformation of attestation certificate with test report number and test parametrs mentioned in the certificate (c) High voltage lightning impulse current withstans test of minimum 35 kA, 8/20 micro second by Central Power Research Institute Govt of India (d) Enclosures, Earth to neutral voltage monitoring device, 63Amps MCB with enclosures with connetion and wiring etc as required.
Supply, Fixing, Testing and Commissioning of Compact Sandwich type Aluminium Feeder Bus Ducts, 200 Amps current carrying capacity, 25 kA breaking capacity, (3L+N+PE), with Multi Layer Class-F Insulation, 100% N, Totally enclosed with 1.6mm thick GI Sheet, Dust & vermin proof with IP-55 (Indoor Type) Ingress Protection, incl 90 degree bends / elbows etc complete all as specified and directed by Engr-in-Charge.
Material and Labour for End Feed Unit with 200 A, TP, 25 kA MCCB thermal magnetic release incl required accessories on site and testing the Bus Ducts with full load current complete all as specified and directed by Engr-in-Charge.
Supply, Fixing, Testing and Commissioning of Tap Off Box 100 Amp, TPN, 25 kA, MCCB thermal magnetic release incl required accessories on site and testing with full load current complete all as specified and directed by Engr-in-Charge.
Taking down existing damaged board from installation and S & F glow sign board with steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1162 -1998 grade St 240 also S & F mild steel sheet thickness 1.25mm plain back sheet in wall cladding, cut to size hole punched, incl round healed screws fixed to wall with suitable size LED board incl suitable number of LED light fittings incl driver etc for proper illumination all as specified and directed by Engr-in-charge. Note:- Content of board will be provided by Engr-in-Charge.Contractor need to liason with deptt for content before going for order.
M&L for Earth continuity conductor or main earthing lead fix to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fix to pole or any other indicated situation for loop earthing extra as required but size 32 x 6 mm galvanised iron strip complete all as specified and directed by Engr-in-Charge.
M&L Earthig complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised using galvanised iron strip 32x6mm as earthing lead by means of bolts, nuts, checks nuts and washers of galvanised iron of steel all as shown in electrical plate No 3 connect to earthing test point all as specified or indicatd including testing on completion complete all as specified and directed by Engr-in-Charge.
M&L for applying two caots of aluminium spray paint on any kind of metal surface with and including preparing of surface by scraching/ removing rust, dust and old paints etc with wire brush, emery paper, grinder etc and making surfaces smooth for achieving better grip between surface and primer complete all as specified and directed by Engr-in-Charge
M & L in replacement for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including PVC conduit of suitable dia, complete with all conduit accessories, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing One light/ fan/ bell/ exhaust fan point controlled by one switch complete all as specified and directed by Engr-in-Charge. Note - All accessories likes modular top cover plate / hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.
All as per ser items No. 20.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the independent board complete all as specified and directed by Engr-in-Charge.
All as per ser items No. 20.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the same board complete all as specified and directed by Engr-in-Charge.
All as per ser items No. 20.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point complete all as specified and directed by Engr-in-Charge.
M & L in replacement for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing in existing conduit, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing for One light/fan/bell/exhaust fan point controlled by one switch.complete all as specified and directed by Emgr-in-Charge. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.
All as per ser items No. 24.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the independent board complete all as specified and directed by Engr-in-Charge.
All as per ser items No. 24.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the same board complete all as specified and directed by Engr-in-Charge.
All as per ser items No. 24.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point complete all as specified and directed by Engr-in-Charge.
M & L in replacement for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing in casing & caping, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing for One light/fan/bell/exhaust fan point controlled by one switch complete all as specified and directed by Engr-in-Charge. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.
All as per ser items No. 28.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the independent board complete all as specified and directed by Engr-in-Charge.
All as per ser items No. 28.00 here-in-before but point wiring for one socket outet point 3 pin 5 amps on the same board complete all as specified and directed by Engr-in-Charge.
All as per ser items No. 28.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point complete all as specified and directed by Engr-in-Charge.
S & F in replacement of modular Switch 16 Amp, 1 Module, single pole one way, ISI marked complete all as specified and directed by Engr-in-Charge.
S & F in replacement of Modular Socket 6 / 16 A - 2/3 Pin combined 2 module complete all as specified and directed by Engr-in-Charge.
S & F in replacement of Modular Switch 1 way 6 /10 A, 1 Module complete all as specified and directed by Engr-in-Charge.
S & F in replacement of Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module complete all as specified and directed by Engr-in-Charge.
S & F in replacement of Modular fan regulator step type, 120W 2 Module complete all as specified and directed by Engr-in-Charge.
S & F in replacement of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed by Engr-in-Charge
S & F in replacement of Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, 240 Volts complete all as specified and directed by Engr-in-Charge.
Material and labour in replacement of Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as specified and directed by Engr-in-Charge. Note : 1. The two run of 6 Sqmm wire, one run of 6 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.
Material and labour in replacement of Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit suitable size, complete with all PVC accessories and 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as specified and directed by Engr-in-Charge. Note : 1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.
Material and labour in replacement of Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as specified and directed by Engr-in-Charge. Note : 1. The two run of 2.5 Sqmm wire, one run of 2.5 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.
Supply and fix in repairs of Modular AC Box enclosure with a top pin and earth plug and socket complete with one Single pole MCB 25 Amp, 240 Volts complete all as specified and directed by Engr-in-charge.
S & F in repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as specified and directed by Engr-in-charge.
S & F in repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as specified and directed by Engr-in-charge.
S & F in repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connectionscomplete all as specified and directed by Engr-in-charge.
S & F in repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, consealed / surface, TPN 6 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCBs / MCBs and isolators etc and making all necessary connections complete all as specified and directed by Engr-in-charge.
S & F in repairs MCB, TPN, 63 Amps, 415V 10KA 'B' curve with overload and short circuit protection complete all as specified and directed by Engr-in-Charge.
S & F in repairs MCB, SPN, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed by Engr-in-Charge.
S & F in repairs MCB, SP, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed by Engr-in-Charge.
S & F in repairs MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed by Engr-in-Charge.
S & F in repair LED light fitting wall / roof mounted, 22 watt, with driver complete suitable body robust, corrosion resistant, superior finish and the system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV, power factor should be more than 0.90, lumen output should not be less than 110 lumens per watt, 6000K complete all as specified and directed by Engr-in-Charge.
S & F in repair LED light fitting wall / roof mounted, 20 watt, Inverter LED batten with square profile, Lithium Ion battery with charging time 8 hrs-10 hrs and back up time upto 4 hrs, with driver complete suitable body robust, corrosion resistant, superior finish and the system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV, power factor should be more than 0.90, lumen output should not be less than 100 lumens per watt, input voltage range 140-280 V AC, 6000K complete all as specified and directed by Engr-in-Charge.
S & F in replacement of ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong / Grid ceiling 2' x2' Panel, of 42 watt (CW) including fixing accessories, (CCT- 5700K), PF>0.95 and Voltage rated 220V to 240V etc complete all as specified & directed by Engr-in-Charge.
D K ENTERPRISES (BID ID -3273759)
Ruchi enterprises (BID ID -3277849)
national engineering (BID ID -3274520)
Vijeta Solutions (BID ID -3274165)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .