Construction of Rain Water Harvesting Pits, Promotion of Apiculture, Sericulture, and Fisheries at Residential Cum Training Complex for Special Prote

S.No. Description DSR Amount Non DSR Amount Total

2 Apiculture 975802.00 975802

Additional 6% GST on

Digitally signed by ARTI

GUPTA 13:04:17 IST

CHAPTER - 1 : RAIN WATER HARVESTING (1 No. 2.20 Mtr x 1.80 Mtr x 1.5 Mtr Water Depth)

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

1.1 EARTH WORK

2.6 1.1.1 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means over areas (exceeding 30cm in depth, 1.5m in width as well

as 10 sq.m on plan) including disposal of excavated earth, lead upto 50m

and lift up to 1.5m, disposed earth to be levelled and neatly dressed.

2.6.1 a) All kinds of soil

2.25 1.2 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m. cum 70 253.95 17,776.50

2.26 1.3 Extra for every additional lift of 1.5 m or part thereof in excavation /

banking excavated or stacked materials.

2.26.1 a) All kinds of soil cum 70 104.50 7,315.00

1.4 CARRIAGE OF MATERIALS

1.1 1.1.1 By Mechanical Transport including loading,unloading and stacking

1.5 CONCRETE & RCC WORK

4.1 1.5.1 Providing & laying in position cement concrete of specified grade excluding

the cost of centering and shuttering - All work up to plinth level.

4.1.8 a) 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm

nominal size) Cum 0.78 6,326.05 4,945.52

5.9 1.6 Centring and shuttering including strutting, propping etc. and removal of

5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 1,903.13

5.9.2 a) Walls (any thickness) including attached pilasters, butteresses, plinth and

string courses etc. Sqm 50 669.55 33,477.50

5.9.3 b) Suspended floors, roofs, landings, balconies and access platform.

5.22 1.8 Steel reinforcement for RCC work including straightening, cutting, bending,

placing in position and binding all complete upto plinth level.

5.22.6 (a) Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 730 89.65 65,444.50

Digitally signed by ARTI

BOQ - PL (EXT) 2 ARTI GUPTA

GUPTA 13:04:17 IST

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

5.33 1.9 Providing and laying in position ready mixed or site batched design mix

cement concrete for reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing strength;

including pumping of concrete to site of laying, curing, carriage for all

leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following

grades of concrete

Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in

design mix is more than 110% of the specified minimum cement content,

the contractor shall have discretion to either re-design the mix or bear the

cost of extra cement.

5.33.1 (a) All works up to Plinth level.

5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 10 8,683.80 86,838.00

1.11 FINISHING (PLASTER WORK)

13.9 (a) Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat

of neat cement.

13.9.1 (b) 12 mm cement plaster

1.11 MISCELLANEOUS WORKS FOR RAIN WATER HARVESTING

19.16 1.11.1 Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS :

1786 having minimum cross section as 23 mmx25mm and over all

minimum length 263 mm and width as 165mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by ribbing

or chequering besides necessary and adequate anchoring projections on

tail length on 138 mm as per standard drawing and suitable to with stand

the bend test and chemical resistance test as per specifications and

having manufacture's permanent identification mark to be visible even

after fixing, including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate

20 mm nominal size) complete as per design.

Digitally signed by ARTI

BOQ - PL (EXT) 3 ARTI GUPTA

GUPTA 13:04:17 IST

DSR - RATE (RS.) AMOUNT(RS.)

2021/ DESCRIPTION OF ITEM UNIT QTY

NO. DSR NS DSR ITEMS NS ITEMS

19.19 1.12 Providing and fixing in position pre-cast R.C.C. manhole cover and frame

of required shape and approved quality.

19.19.3.1 (b) Circular shape 560 mm internal diameter

NS 1.13 Supplying, filling, spreading & leveling brick aggregate of size 50 -63mm ,

in recharge pit, in the required thickness, for all leads & lifts, all complete

as per direction of Engineer-in-charge.

NS 1.14 Supplying, filling, spreading & leveling Charcoal activated carbon, in the

recharge pit, over the existing layer of brick aggregate, in required

thickness, for all leads & lifts, all complete as per direction of Engineer-in-

23.7 1.15 Supplying, filling, spreading & leveling coarse sand of size range 1.5

mm to 2 mm in recharge pit, in required thickness over gravel layer,

for all leads & lifts, all complete as per direction of Engineer -incharge.

(a) Providing & laying 120GSM Geotextile/Geo fabric over coarse sand bed

TOTAL COST OF 1 NO. RAIN WATER HARVESTING PIT 26,83,736.03 1,59,962.00

COST FOR 10 RWH PIT

Digitally signed by ARTI

BOQ - PL (EXT) 4 ARTI GUPTA

GUPTA 13:04:17 IST

Promotion of Apiculture

Sr. No Description Unit Rate Qty. Amount

Training Modules and Promotion for Apiculture Course 30 Days Program

Each of the 8 modules has a similar outline consisting of 8 parts. These are:

1. Introduction to the module – context and background to training needs, knowledge

and skills gaps being addressed

2. Module learning outcomes – what trainees are expected to learn

3. Module target group-trainee categories

4. Module users –facilitators

5. Module duration –minimum number of hours of exposure to materials

6. Module summary –sequence of sessions, training methods, materials and duration

7. Facilitator’s guideline –detailed sessions, training methods, materials and session

1 8. Participant’s handouts – detailed notes and reference materials for trainees. Person 30,542.00 20 6,10,840.00

All Training Program have to follow above Modules.

Course Description

1: Beekeeping and Beehive technologies,

2: Bee foraging and ecosystem conservation,

3: Housing of bee colonies and types of housing technologies used,

4: Harvesting, post harvesting handling and processing,

5: Integrated Bee Pastures

6: Strategic use of honeybees for crop pollination,

7: Social issues

i Supply and installation of Bee colonies (Cerana) no. 7,401.00 16 118416

ii Supply and installation of Bee Farm Wooden Beehive Box no. 3,015.00 48 144720

iii Supply and setting up of honey extractor no. 13,705.00 1 13705

v Supply and setting up of ant wells no. 54.00 300 16200

vi Supply and installation of Feeder Frames no. 205.00 100 20500

vii Toolkit for training like honey bee farming equipment (smoker, hive tool, swarm net, no. 27,685.00 1 27685

wire embedder, storage drums and other miscellaneous) etc.

viii Setting up and installation of Queen gates no. 138.00 172 23736

Total including GST 9,75,802.00

Digitally signed by ARTI

GUPTA 13:04:17 IST

Promotion of Fishries

DSR- NON- NON-

DESCRIPTION OF WORK Unit Quantity 2021 DSR/MR DSR/MR - TOTAL AMOUNT

DESCRIPTION OF WORK Unit Quantity 2021 DSR/MR DSR/MR - TOTAL AMOUNT

Item No. Rates RATE Amount

Skill development training for job role as “Ornamental Fish Technician” (30 Days)

About the course: The (NSDC) under the auspices of Ministry of Skill

Development and Entrepreneurship, Government of India has identified the need of skill development in

“Ornamental Fisheries”. The NSDC has developed standardized course contents termed as “Qualification

(QP)” that are delivered to the participants as per specified delivery methods termed as “National

standards (NOS)” considering the potential of livelihood generation and employment in this sector. The

is designed to skill persons of any level of education with such abilities that they could either plan to

employed or get employment in the field of ornamental fisheries. A candidate will be required to appear

assessment test on the last date which is conducted by NSDC approved Skill development Organizations..

Course Contents: The QP is consisted of 100 hours of theory and 100 hours of practical classes as per the

guidelines of NSDC and to be covered within 30 days. The important topics of training are:

Delivery Method: Class room lectures, One to one discussion, Presentation of case studies, Group PERSON 24 30542 733008 733008

Language of Instruction: English and/or Hindi

Educational Qualification: Graduates in Fisheries or Life Sciences

Course duration: 30 Days

Course Contents: The entire training programe have to followd above modules is divided into

four different sections. The contents of each section are described in table below:

Course Description

1.Identification of different ornamental fish species of commercial importance.

2. Tank fabrication and pond preparation activities.

3. Feeding regime and live feed preparatory methods.

4. Health management of ornamental fishes.

5. Breeding, culture and seed production.

6. Regulation of safety, hygiene and sanitation practices.

7. Government scheme for availing funding support

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up

2.31 to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 sqm 260 14.5 3770 3770

m outside the periphery of the area cleared.

Earth work in excavation by mechanical means (Hydraulic excavator)/

manual means over areas (exceeding 30 cm in depth, 1.5 m in width as

2.6 well as 10 sqm on plan) including getting out and disposal of excavated

earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

2.25 layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead cum 675 253.95 171416.25 171416.25

5 up to 50 m and lift upto 1.5 m.

Digitally signed by ARTI

GUPTA 13:04:17 IST

Construction of store rooms with Gi sheet with Structural Steel 0

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20

mm nominal size derived from natural sources)

4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 0

4.3.1 Foundations, footings, bases for columns sqm 10 307.95 3079.5 3079.5

5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 473 89.65 42404.45 42404.45

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including

cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as

approved by Engineer-in-charge) 0.60 mm (+ 0.05 %) total coated thickness with zinc coating 120

grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the

sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns

NS minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre sqm 35 963.31 33715.85 33715.85

or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size

(5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces,

excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever

15 A Supply and installation of 4 H.P Pump sets as approved by Engineer incharge No 1 89,744.00 89744 89744

16 B Supply and fixing of Nets made from fiber woven in a grid-like structure for protection of fishes NO 1 13,705.00 13705 13705

17 C Supply and sprinkling of fertilizers(Lime, single super phosphate) etc kgs 900 47.00 42300 42300

18 D Supply and spreading of fish seed (2000) nos 3000 13.00 39000 39000

19 E Supply and feeding the fish feed to the fishes kgs 2500 20.00 50000 50000

Digitally signed by ARTI

GUPTA 13:04:17 IST

Quant 2021 NON-DSR/MR NON-DSR/MR

S.NO DSR-2021/NS DETAILS OF THE SERICULTURE TRAINING PROGRAMME FOR 30 DAYS Unit ity RATE Rates DSR AMOUNT AMOUNT TOTAL AMOUNT

S.NO DSR-2021/NS DETAILS OF THE SERICULTURE TRAINING PROGRAMME FOR 30 DAYS Unit ity RATE Rates DSR AMOUNT AMOUNT TOTAL AMOUNT

OBJECTIVES OF THE TRAINING:

1.To assist in introducing and developing sericulture activities in Third World countries,

2.Generation of skilled man power in the field of sericulture,

3.To impart training in extension management and transfer of technology,

4.To impart training in Post Cocoon Technology, and

5. To provide field exposure

The above subjects will be covered both for theory and practical. One rearing will be conducted specially for the training

programme, wherein, the trainees themselves will participate and acquaint themselves with the practical aspects of silkworm

rearing. Practical sessions will also be arranged on different aspects of sericulture. The Resource persons will use audio-visual

methods for effective communication. The trainees will also be exposed to field activities among the farmers through field visits.

The schedule of the training shall be on the following manner:

The programme will be of 30 days duration and the batch strength will be 30 persons.

The training programmes will be conducted by covering the following subjects:Description

(a) Mulberry cultivation technologies,

(b) Silkworm rearing (Young age and Late age silkworm rearing),

(c) Silkworm seed production technology,

1 (d) Extension management and transfer of technology, and

2 Establishing a sericulture garden For Training Purpose NO 1 17,241.00 17241 17,241.00

3 Construction of Rearing House with Gi sheet with MS-Structural Steel 0 0.00

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -

4 All work up to plinth 0

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal

5 size derived from natural sources) 0

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived

6 from natural sources) 0

7 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 0.00 0 0.00

8 4.3.1 Foundations, footings, bases for columns sqm 10 307.95 3,079.50 0 3,079.50

5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all

9 complete upto plinth level. 0

10 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 450 89.65 40,342.50 0 40,342.50

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in

11 position and applying a priming coat of approved steel primer all complete. 0

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-

charge) 0.60 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,

5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard

NS film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as sqm 27 963.00 26,001.00

desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM

seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and

12 including cutting to size and shape wherever required. 26001

13 NS Equipment for rearing kit For Training Purpose like (Baskets,mulberry leaves,trays for feeding larvae leavings,some woven mats) NO 1 69,006.00 69006 69,006.00

14 NS Developing irrigation source For Training Purpose NO 1 35,236.74 35236.74 35,236.74

Digitally signed by ARTI

GUPTA 13:04:17 IST