Loading…
Loading…
Tender Value
₹42.2 Cr
EMD Value
₹37.6 L
Closing Date
24 Sept 2026, 9:30 pm
Karnataka Neeravari Nigam Limited
KodandaRam TN
9448767960
work comprising of construction of Intake structure, Jack well cum pumphouse, Pumping machineries (2 pumps), 33/6.6kV Electrical substation with power transformer, 33kV Transmission line, 110/33kV Transformer bay with 33kV Terminal bay, Rising main Including supply of spare parts and tools, O and M for five years after successful commissioning of the entire scheme on turnkey basis
KNNL/2026-27/LI/WORK_INDENT4457
KNNL/2026-27/LI/WORK_INDENT4457
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
KNNL Division Canal Div No 4 Sirwar
20 documents required · 20 mandatory
The intending bidder should have satisfactorily completed (at least 90% of contract value) at least one work of Construction of Lift Irrigation scheme costing not less than Rs. 2216.14 Lakhs (i.e., not less than 50% of the amount put to tender) on turnkey basis in the last five years (i.e., from 2021-22 to 2025-26). The work done certificate shall be issued by an officer not below the rank of Executive Engineer of the concerned Division / equivalent officer and countersigned by the Superintending Engineer of the concerned circle / next higher officer with indent number. The cost shall be updated to the present value by giving weightage at 10% each year, if the work is completed prior to the year 2025-2026.
The intending Bidder should have supplied and successfully commissioned at least 2numbers of VT pumps with a capacity (flow rate) not less than 0.752 cumecs for each pump with a head not less than 73m for each pump during the last 5 years (i.e., from 2021-22 to 2025-26). The necessary work done certificate issued by an officer not below the rank of EE and countersigned by the SE of the same circle should be uploaded.
The intending bidder should have laid and tested minimum quantity of MS Rising Pressure pipe system of the work with following diameter of pipes in any one financial year, during the last five financialyears (i.e., from 2021-22 to 2025-26).. Certificate should be obtained from an officer not below the rank of Executive Engineer of the concerned Division and countersigned by the SE of the concerned Circle or equivalent in case of other Govt. undertaking within India. MS pipe with Inner diameter not less than 500 mm for length 7.51Km for MS Rising Main and Pressure distribution system. Minimum executed Qty 6.0Km
The intending bidder should have executed a minimum quantity of following critical items of work in anyone financial year, during the last five financial years reckoned back from 2025-26. Certificate should be obtained from an officer not below the rank of Executive Engineer of the concerned Division and countersigned by the SE of the concerned Circle i.e Earthwork Excavation/Embankment or both put together 64372.34 Cum, Reinforced Cement Concrete (M-15 Grade and above) 2179.90 Cum, Reinforcement steel 162.00 MT, Structural steel 4.21 MT.
GST Registration certificate.
Latest copy of Income Tax Returns filed. Financial Year 2024-25 (Assessment year 2025-26)
Instructions to Joint Ventures: GST Registration certificate.
Instructions to Joint Ventures: Latest copy of Income Tax Returns filed. Financial Year 2024-25 (Assessment year 2025-26)
Instructions to Joint Ventures:All the partners should have achieved in at least two financial years 25% of prescribed annual tumover (Qualification criteria) in the last 5 years (i.e., 2021-22 to 2025-26).
The intending bidder in his/its name should have In the last 5 years i.e.,2021-22 to 2025-26achieved in at least 2 financial years, a minimum financial turnover of Rs. 5909.7Lakhs (usually not less than two times the estimated annual payments under this contract. The turnover prior to FY 2025-26 will be updated to the Present Price Level by giving weight age of 10% each year. Audited Profit and Loss account certified by a practicing Chartered Accountant bearing UDIN along with copy of Income Tax returns filed for the years indicated above should be furnished. FY2025-26.
Bidder should furnish liquid assets and/or availability of credit facilities of not less thanRs. 1329.68Lakhs from any Nationalized / scheduled bank (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc. The format for Bankers Certificate/ Line of Credit (BC/LOC).
A copy of the KPWD/ CPWD Class-I Registration Certificate with validity.
Valid Employees Provident Fund Registration Certificate with latest paid challan.
Technical details containing documents with preliminary designs, working methodology in support of their bid as per the bidding document.
The intending bidder/firm/company should furnish list of man-power, machinery available with them for taking up the work.
The contractor should furnish the name of the individual/firm with address and telephone No. with place of registration, year of incorporation etc.
Each of the documents uploaded to the e-portal, should be self-attested by the contractor or an authorized representative in case of firm/company
Instructions to Joint Ventures: Valid Employees Provident Fund Registration Certificate with latest paid challan.
Instructions to Joint Ventures:Technical details containing document with preliminary designs, working methodology in detail with support of their bid as per the bidding document.
Instructions to Joint Ventures:The intending bidder/firm/company should furnish list of man-power, machinery available with them for taking up the work.
Instructions to Joint Ventures:The contractor should furnish the name of the individual/firm with address & telephone No. with place of registration, year of incorporation etc.
Instructions to Joint Ventures: Each of the documents uploaded to the e-portal, should be self-attested by the contractor or an authorized representative in case of firm/company.
Instructions to Joint Ventures:The joint venture (JV) of the individual bidders shall be formed prior to the bidding and necessary agreement for having joint venture before bidding should be uploaded.
Instructions to Joint Ventures:The individual bidders of joint venture should be Class I Contractor registered in Kamataka PWD/Central PWD separately. A copy of valid KPWD/CPWD Class I registration certificate of individual bidders of joint venture should be uploaded.
Instructions to Joint Ventures:The number of JVs shall not exceed 3.
Pre-Qualification Criteria: The intending bidder can submit bids as an Individual bidder along withTie up of pump manufacturer. The Tie up is to be formed prior to the bidding.Tenders from a Tie-up proposed in this bid, the bidder shall upload an agreement with only one pump manufacturer on Rs 200-00 stamp paper in the prescribed format which shall be concluded prior to bidding and enclosed to the bid document. For proof of the Tie up, in the technical bid, the prescribed format under section 2 - instruction to tenderer (ITT) shall be followed.
The intending bidder should have Own/Lease equipments and machineries, shall be furnished as per the Finance Department Govt Circular No. FD 263/EXP/12/2022 dated 11.05.2022. Availability by owning at least 50 percentage of the required / specified key and critical equipment for this work. Each tenderer should demonstrate availability of few key equipments/machinery for execution of the work. However, it is obligatory for the contractor to use the following machineries for various activities of roadwork /Irrigation works involved in construction as per MORTH specification and Irrigation manual. i.e Excavator total 4Nos 2 OWN and 2 Hire, Tipper 4 OWN and 4 Hire, Transit mixer 1 OWN and 1 Hire, Concrete mixer 2 OWN and 2 Hire, Vibratory Road Roller 1 OWN and 1 Hire, Dewatering Pump 2 OWN and 2 Hire, CRANE Capacity20 Tonnes above 1 OWN and 1 Hire, Water Tanker 3 OWN and 3 Hire.
BID CAPACITY: The tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value the available tender Capacity will be calculated as under: Assessed available tender Capacity is equals to (AxNx1.5-B).
For construction of Transmission line/Substation Works, the contractor shall engage only those agencies who are licensed to do the power line construction works in Karnataka. They should have constructed atleast one similar single power line of 33 kV SC line of power line for the work tendered in a single contract. The details of the transmission line construction contractor with registration certificate and certificates of experience signed by an officer of not below the rank of Executive Engineer of KPTCL shall be submitted for KNNLs verification post award of the work.
The pump manufacturer shall not enter intoTie-up with more than one bidder.
₹7,500
₹37.6 L
25 Aug 2026
25 Aug 2026
25 Sept 2026
18 Sept 2026
15 Sept 2026
Survey, investigation, design, supply, erection, testing and commissioning of LIS for supplementing water to suffering atchkat of 3997Ha of D 76 of TLBC by lifting water from Tungabhadra River near Yedival village of Manvi Taluk, Raichur District on Turnkey basis, PHASE I
Section-1 (Part A - Electromechanical Works) Design supply, installation and commissioning of pumping machinery - 2 No of Vertical Turbine pump with coupled to HT Motor capacity 1520 HP (SH-49.80 m &...
Section-1 (Part A - Electromechanical Works) Construction of 33/6.6 kV Electrical sub station with 1No 3.5 MVA capacity of Power Transformer at JWPH and including construction of 110/33 kV Transformer...
Section-1 (Part A - Electromechanical Works) 33 kV Transmission line from Nearest existing Madlapur KPTCL substation for the Length of 15 km
Section-1 (Part B - Civil Works)
Construction of Intake Canal (L= 392 m) and Forebay ( L= 20 m)
Section-1 (Part B - Civil Works)
Construction of Jack well cum pump house for housing 3 No's (2 working + 1 standby) of 1520 HP/pump for required discharge of Vertical Turbine Pumps, Watchman quart...
Section-1 (Part B - Civil Works) Construction of Rising Main: Reach-1: 1 row of 1100 mm diameter MS pipe, with 6 mm thick for a length of 4.740 km (Ch: 0+000 to 4+740).
Rising Main: Reach-2: 1 row of...
Section-1 (Part B - Civil Works)
Construction of Bleeder: Reach-1: 1 row of 575 mm diameter MS pipe, with 5 mm thick for a length of 1.570 km (Ch: 0+000 to 1+570).
Section-1 (Part B - Civil Works)
Construction of Delivery Chamber at DC-1
Section-1 (Part C - Detailed Engineering)
Detailed Engineering consisting of detailed designs and working drawings for Jackwell cum pumphouse, Risingmain, Pressure distribution network, structures, d...
Section-1 (Part D - Operation and Maintenance )
Operation and Maintenance of the Lift Scheme for 5 years.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
YADIVALA -BID DOCUMENT FINAL.docx
Others - Bid document • 13.38 MB
YADIVALA LIS NOTIFICATION FINAL.docx
Others - Tender notification • 0.16 MB
Index map.pdf
Others - Index map • 1.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].