Loading
Loading…
Loading…
Tender Value
₹4.0 Cr
EMD Value
₹3.5 L
Closing Date
8 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TELE JAT
14 conditions · 3 needing a document upload
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender
Definition of similar work : Work of Supply, Installation, Testing and Commissioning of PDH/SDH, ADM/PD Mux and its associated equipments. OR AMC of PDH/SDH, ADMS, PD Mux/ Faulty Card of Mux Repair work and associated equipment. OR Work of Excavation of Trench and Underground cable laying. Jointing of Copper cable or OFC cable OR Trenching. Laying. Splicing and Testing of OFC Cables and Part Supply. Testing and Commissioning of SDH equipment. OR Trenching, Laying. Jointing and Testing of 6 Quad/PIJF Cables including. Erection & testing of Emergency socket and part Supply. testing and commissioning of Repeater Equipments, OR Trenching, Laying. Splicing/Jointing and Testing of OFC/6-Quad cables, Erection & Testing of Emergency socket and part Supply. Testing and Commissioning of SDH/ Repeater Equipment. Note A1: For the following equipments after award of contract and before supply of equipment "MOU with OEM or RDSO approved Firm covering Supply, Installation, testing and commissioning of system shall be submitted including after sales support required during the warranty period SDH/STM/PDMUX Control Equipments ISDN/IP based Exchange CCTV/Video surveillance system Integrated Security System (ISS) Networking Equipment Train Information Display Boards/Coach Guidance Systems/IPIS/GPS Clocks Secured communication system at Level Crossing Gates VSAT MTRC An undertaking by the tenderer shall be provided at the time of tender submission that the equipment shall be procured: a) If there is any RDSO approved source, then the equipment to be procured from the RDSO approved source or its authorized dealer/distributor covering Supply, installation, testing, commissioning of the system including after sales support required during the warranty period. b) If there is no RDSO approved source but there is TEC approved source, then the equipment to be procured from the TEC approved source or its authorized dealer/distributor covering Supply, installation, testing, commissioning of the system including after sales support required during the warranty period. c) If there is no RDSO or TEC approved source, then the equipment to be procured from the OEM or its authorized dealer/distributor covering Supply, installation, testing, commissioning of the system including after sales support required during the warranty period.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
33 conditions · 16 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Provision and erecting 92.900 Km Metal beam crash barrier & 20.90 km RCC boundary wall along the track Vande bharat Route in PTKC-JAT.
433_TELE_JAT_16_25-26
433_TELE_JAT_16_25-26
Open
Works - General
6 Months
Jammu, Jammu And Kashmir
₹0
₹3.5 L
8 Apr 2026
17 Mar 2026
25 Mar 2026
130 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,95,24,076.67 | ||
| — | 50.00 | — | — | ||
| Supply of Optical fiber joint enclosure. As per rdso specs RDSO/SPN/TC/68/2014 rev 1 or latest. The joint enclosure shall be of Raychem/3M/TVSE/Roxtec or similar make as per advice of site in-charge.Inspection : Consignee. | — | — | — | 1,56,130 | |
| — | 1500.00 | — | — | ||
| Supply & Fixing of perforated GI pie of 80mm/75mm outer/internal dia as per arrangements shown in drg No no core/S&T/ALD/SK/589/2007(2 pages) & Drg No. Core S&T/ALD/SK/589/2007(attached as Annexure A) on girder bridges, tunnels without any intermediate support but with metallic fixtures(two per length of six meters) as per decision of site engineer for protection of OFC & 6 quad cable to be laid. Inspection: Rites | — | — | — | 27,17,340 | |
| — | 92000.00 | — | — | ||
| Supply of PLB-HDPE duct outer diameter 40 mm & inner diameter 33 mm as per RDSO/SPN/TC/45/2013, Rev. 2.0, Amendment 1-3, or latest with all accessories as described in RDSO specifications. As covered in the specifications, two nos. each of end plug, cable sealing plug and end cap shall be supplied along with each coil along with adequate no. of plastic couplers (No. of couplers to make a continuous length of the lot + 10% extra) shall be supplied along with each lot including one number of Duct cutter, C spanner and chamfering tool shall be supplied along with each lot of 100 coils. Inspection : RITES | — | — | — | 55,62,320 | |
| — | 50.00 | — | — | ||
| Supply & installation of jointing pit as per drawing DRG.NO.RDSO/TCDO/COP-21 or latest with cover and required trenching to ease out cable/duct. (The joint chamber should be of the size of outer dia 1100 mm, Height -600 mm (2 pieces of 300 mm each). The thickness of the wall should be 50 mm and each piece of the chamber should have suitable groves to fit each other). Inspection by consignee | — | — | — | 2,62,874.5 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 10 pair C.T. Box of FRP material and termination of cable as per Technical specs attached as Annexure-A.This includes all the material required for fixing include salwood/hylem board in cable hut and hardware required for fixing. This also includes terimation of all cables and other associated works. Inspection by Consignee. | — | — | — | 13,290.6 | |
| — | 12.00 | — | — | ||
| Supply of Thermo shrink jointing kit as per Technical Specification NO. IRS: TC 77- 2012 Revision 3 or latest & its installation for 6 quad cable for derivation/ termination joints with V F Transformers .(Inspection: RDSO) | — | — | — | 41,802.36 | |
| — | 12.00 | — | — | ||
| Supply of Emergency socket box made up of FRP material with design as per RDSO/SPN/TC/44/2002 Version 3.0 or latest.(Inspection: Consignee) | — | — | — | 52,104.6 | |
| — | 12.00 | — | — | ||
| Supply of 6 pin Emergency socket as per RDSO specification IRS: TC-42/2020 Version:1.1. (INSPECTION BY CONSIGNEE) | — | — | — | 3,055.92 | |
| — | 50.00 | — | — | ||
| Supply of V F Transformers (1 Quad/2T) as per Technical Specifications RDSO specification: IRS:TC 76-2000 . (Inspection: Consignee) | — | — | — | 64,680 | |
| — | 260.00 | — | — | ||
| — | — | — | 40,040 | ||
| — | - Supply No.CORE/S&T/ALD/SK/600/2013(attached trench and also | of RCC/Stone as also at places / corners be provided at all types of | as per route at the spacing RCC/Stone | ||
| — | 10.00 | — | — | ||
| Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No.SDO/RDSO/E&B/001 dtd.19.09.08(attached as Annexure-A). It consists of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. © Copper strip of 200x25x6 mm, to terminate earth rod = 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 200x25x6mm = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate (minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS:694 for connecting various equipment's to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO. | — | — | — | 1,50,537.9 | |
| — | 2.00 | — | — | ||
| Supply of electronic Cable Route/Tracer of reputed make 3M Dynatel/ Aplab/ Stanley / RD or similar reputed make along with TEC GR.no. GR/TIE-01/02.OCT'99 or latest(i) Cable avoidance tool DXL2/4 or similar digital under ground cable & pipe locating receiver and cable avoidance tool. (ii) SGV2/4 or similar signal generator. (iii) Signal lamp accessory (iv)Carry bag .Inspection : RITES | — | — | — | 6,22,063.92 | |
| — | 2.00 | — | — | ||
| Supply of cable fault locator for underground metallic S&T cable of reputed make 3M Dynatel /Andig/Aplab/ Stanley /RD or similar reputed make specification similar to (Test signal output1/2 Sine, Pulse width 5nsec to 2500nsec, MaxRange:1500m, Filter cut- offFrequency:150kHz(High Pass Filter),Gain:0 to 63dB) with TEC GR No. G/TIE-02/02 JUL 99 - JUL 99 or latest. Item to be supplied after successful demonstration and approval of railways.Technical specification attached as Annexure-A Inspection -CONSIGNEE | — | — | — | 3,85,724.52 | |
| — | 10.00 | — | — | ||
| Supply, installation and wiring of 24 pair C.T. Box fitted with WAGO make or similar Disconnect type Terminal blocks (Knife type cage clamp technology [Screw-less] with spring loaded contact) having disconnection and reconnection facility, WAGO terminal should suitable for termination of cable from 0.4mm to 0.9mm dia. PIJF/Quad cable [Indoor type]. Inspection: Consignee. | — | — | — | 37,074.6 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 50 pairs CT box and termination of cable as per Technical specs attached as Annexure-A.This includes all the material required for fixing include salwood/hylem board in cable hut and hardware required for fixing. This also includes terimation of all cables and other associated works.Inspection : Consignee. | — | — | — | 26,990.9 | |
| — | 10.00 | — | — | ||
| Supply of Digital Cable Insulation Tester for measurement of cable insulation resistance with auto range 0-500 V DC,range (0-10000 mega ohm), hand driven, analog type, metal body with testing lead. calibration certificate approved by nabl or other govt approved agencies. make : meco, cie, kusum, yokins motwane pie make. Inspection: Consignee | — | — | — | 67,715.1 | |
| — | 50.00 | — | — | ||
| Tools Kit for maintenance with small sizecanvas bag with following items :- 1)Combination Plier 8", 2) Long Nose Plier(Round Nose ) 6" , 3) Wire Striper Plier6" , 4) Screw Driver set ( 5 Piece) , 5) Hexa with frame 12" 6)Adjustable Spanner set 8" 7) Ball pinHammer (200 gm) , 8) Side Cutting Plier6" 10) Soldring iron (Soldron make orsimilar) 11) Torch with cell (3 cell)(Eveready/ Geep or similar ), 12) KroneTool (Krone make or similar) 13) Crimping Tool, 14) LAN Tester, 15) Wrapping and DeWrapping tool, 16) Visual Fault Locator, All ToolItem 1 to 9 of Taparia/Gedor/ Jhalanimake or similar. Inspection by Consignee. | — | — | — | 2,86,356 | |
| — | 80.00 | — | — | ||
| Geographic Information System (GIS) Mapping of all S&T cable trenches & RCC Ducts (Main and Tail Cables) by collecting and storing positional data at every 5 meter interval with reference to existing track and proposed signalling gears like Location boxes, Signals, Points, Glued Joints, LC gates and other important fixed structures with an accuracy of 2-3 cm. The GIS mapping includes collection of positional data of the objects using a GNSS RTK enabled device and processing the data on suitable software and map it for preparation of trench layout and exporting data on excel format. It includes exporting and processing of data on google earth and other suitable applications in reference of tracks and track kilo meter chainage. Item covers preparation of trenching plan on CAD format on A3 size paper by importing the data collected from site through GIS mapping device. The plan shall be prepared with suitable scale to showing minute detail of depth of trench and ground level at every five Kilometre meter interval, Position of all S&T gears. The data collection shall be done before refilling of trench and shall be processed. After approval of filed units the trench plan will be submitted in 8 Nos of colour copies. Trench data shall be used for preparation of standard cable route plan, preparation of cable route plan is covered separately in another item of schedule. Note:- The GIS mapping shall be done by contractor using their own devices , software and man power. Inspection: Consignee | — | — | — | 3,22,876 | |
| — | 1.00 | — | — | ||
| Supply of portable GIS mapping device LT800AH tablet or similar with Antenna, Charger and complete Accessories with warranty of minimum 3 years Technical specifications are attached in Annexure- A. Inspection:RITES. | — | — | — | 3,30,111.03 | |
| — | 150.00 | — | — | ||
| Supply and transportation of thermoshrink jointing kit RTSF4 for quad cable as per RDSO specification no. IRS TC 77/2012 (rev.3.0) or latest . Thermoshrink jointing kit for jointing Underground 0.9 mm dia. cond. 4/6 quad cable as per specification no. IRS TC77/2012 (rev. 3) with amend. 1, 2 & 3 or latest. Accepted make: RTSF or make.Inspection:RDSO. | — | — | — | 4,40,647.5 | |
| — | 400.00 | — | — | ||
| Supply and installation of Electronic Cable Route markers (with RFID) as per TEC Specification no. TEC/GR/TX/TIE-07/02/Mar-14 or latest, of suitable frequency and color for Telecommunication cables as per the TEC Specifications, to be provided at the spacing of 200 metres in the trench and at places / corners where the route of cable changes including at both ends of Level crossings Road crossings. The Electronic route marker shall also be provided at the all joints also. It includes the programming of Markers as per Instructions of Engineer in charge and preparation & submission of the list of IDs of all Markers installed. The Marker shall be of Specifications to work for minimum 5 feet distance (depth). The Markers and the Marker Locator unit (Locater covered separately) are to be inspected & supplied together of same make and compatible model.Inspection : RITES | — | — | — | 10,45,388 | |
| — | 2.00 | — | — | ||
| Supply of Marker Locator unit as per TEC Specification no. TEC/GR/TX/TIE-07/02/Mar- 2014 or latest for Electronic Cable route Markers (with RFID). The Markers (Markers covered separately) and the Marker Locator unit are to be inspected & supplied together of same make and compatible model.Inspection:RITES. | — | — | — | 6,34,558.82 | |
| — | 2.00 | — | — | ||
| Supply of Transmission measuring set (TMS kit) complete with tone generator and Db meter as RDSO specification IRS: TC-43/87 or latest. Note: - The sample must be approved by the consignee before actual delivery.MAKE/ BRAND- Anu Vidyut or similar or better.Inspection : CONSIGNEE. | — | — | — | 47,206 | |
| — | 10.00 | — | — | ||
| Supply of 230V/48V /50A ( 2+1) SMPS based power plant as per RDSO Specification: RDSO/SPN/TL/23/99 (Ver 4) or latest suitable for VRLA batteries using 3 modules of 25 Amp.Inspection:RDSO. | — | — | — | 6,96,622.8 | |
| — | 10.00 | — | — | ||
| Supply and installation of Valve regulated lead acid stationary battery of 48 v 500 ah duly charged conforming to IRS spec IRS S-93/96 Awith latest amendment, the battery bank shall be supplied with stackable single cell of 2v/500Ah and shall house in metal tray to facilitiate in the required batterybank of 48v i.e each cell consisting of 24 nos of stackable single cell of 2v-500Ah along with necessary cell consisting links, nuts, bolts, floot insulation etc. Inspection By RDSO | — | — | — | 20,34,664.8 | |
| — | 10.00 | — | — | ||
| Supply of 3KVA/ 2.7KW capacity True On Line Rack mounted UPS System. Phase: 1P Input - 1P Output Form Factor: 2U Size Dimension (W x D x H): 440 x 430 x 88mm .As per tech. specs . attached as Annexure A.Model number: New R Series or similar, make Delta or better." Inspection By RITES | — | — | — | 10,18,773.8 | |
| — | 10.00 | — | — | ||
| Supply, installation & commissioning of Power supply unit with 12V/7AH MF Battery Backup & charging system for Way station equipment as per RDSO specification No. IRS/TC 72/97 or latest.Inspection By CONSIGNEE | — | — | — | 31,865 | |
| — | 10.00 | — | — | ||
| Supply and installation of 4 Wire DTMF signaling based Way station control equipment as per RDSO specification No. IRS-TC 60-2007 Amendment-1 or latest with proper mounting arrangement along with control telephone as per RDSO specification No. IRS:TC 38-97 Amendment 1-2 or latest.Inspection By Consignee. | — | — | — | 35,707.5 | |
| — | 4.00 | — | — | ||
| Supply and installation of 4 Wire DTMF Type control HQ Equipment as per RDSO specs IRS-TC 60/2007 Amendment-1 or latest with mike, speaker, hand set and code generator etc. along with numeric key pad LED/LCD display and 12V/40AH Maintenance free dual battery back up with charging system, this should also comprise of mounting arrangement and wiring in control office having inter connection with test room with capability to connect and disconnect control circuits from test room as directed by Railway Site Incharge.Inspection By consignee | — | — | — | 2,89,137.68 | |
| — | 4.00 | — | — | ||
| Supply and installation of 4 Wire Emergency control Equipment as per RDSO specs IRS-TC 61-93 amendment -2 or latest suitablen for quad cable with mike, speaker, hand set and code generator etc. along with numeric key pad LED/LCD display and 12V/40AH Maintenance free dual battery back up with charging system with VF Transformer if required, this should also comprise of mounting arrangement and wiring in control office having inter connection with test room with capability to connect and disconnect control circuits from test room as directed by site in- charge.Inspection By consignee | — | — | — | 2,89,137.68 | |
| — | 20.00 | — | — | ||
| Supply, installation, complete splicing & testing of Optical fiber cable termination box for 48 fibers complete with base housing, base mountings with fixing arrangement etc & splicing of fibers with low loss of pigtail cables as per detailed specification mentioned in respective tender documents. Two pairs of fibers shall be derived from either side of OFC cable at every OFC cable hut provided at wayside stations through pigtails with FC/PC connectors and remaining fibers on either side will be made through by splicing. At OFC terminal stations/MW repeater stations, all fibers shall be derived from either side and to be terminated in OFC termination box through pig tails and FC/PC connector. The OFC termination box to be supplied as per TEC No. G/FTB 01-02 March- 99 or latest. Splice losses in no case should be more than 0.1 dB. Necessary 0 dB connectors should be provided by contractor in OFC termination box. Inspection: RITES | — | — | — | 4,21,163.8 | |
| — | 500.00 | — | — | ||
| Supply of STP RJ 45 Connectors Make D-Link, AMP, DAX, Legrand, Molex or Digilink. Inspection By consignee | — | — | — | 6,280 | |
| — | 100.00 | — | — | ||
| Supply and installation of I/O Box, WhiteJack Cat 6 Keystone UTP with Face Plate- Single (Keystone Jack, Square) & SMB.Make: D-Link or similar. Inspection: Consignee for Supply portion. | — | — | — | 27,675 | |
| — | 100.00 | — | — | ||
| Supply of Single Mode Fiber Patch cable 05 Meters as per site requirement.Inspection By consignee | — | — | — | 39,924 | |
| — | 100.00 | — | — | ||
| Supply of Patch cord with connectors as per OEM requirement-10 Mtrs of approved make.Inspection By consignee | — | — | — | 2,73,765 | |
| — | 100.00 | — | — | ||
| Supply of Patch cord with connectors as per OEM requirement-05 Mtrs of approved make.Inspection By consignee | — | — | — | 1,92,925 | |
| — | 165.00 | — | — | ||
| Supply of WIFI ADSL modem as per RDSO specification no. RDSO/SPN/TC/89/2008 Rev. 0 amendment 1 or latest Make D-Link ,TP- link Or Netgear Material Should be procured from RDSO approved Vendor or OEM supporting certificate shall be provided that the material has been manufactured as per RDSO specification attached. Inspection by Consignee. | — | — | — | 2,12,430.9 | |
| — | 80.00 | — | — | ||
| Supply of Single mode Single Fibre 10G SFP module compaitable to Layer 3 core switch .Material Inspection by RITES. | — | — | — | 4,03,178.4 | |
| — | 4.00 | — | — | ||
| Supply,Installation, Testing & Comissioning of rack mountable 24 port manageable Layer -3 Core switch with 4 nos 10G SFP port and 24 nos GE port with all accessories as per RDSO Spec. No. RDSO/SPN/TC/83/2020 REV 2.0 or latest.Product must be TTP-registered and certified with RDSO. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Material Inspection by RITES.The work is to be executed as per the instruction of Railway Site Engineer. | — | — | — | 6,75,855.72 | |
| — | 10.00 | — | — | ||
| Supply, Installation,Testing and Commissioning of Rack Mountable 24 port Layer 2 POE (Minimum 370 Watt or better from Day 1) with 4 Nos of 10G SFP+ Uplink ports as per RDSO specs .RDSO/SPN/TC/83/2020 REV 2.0 with Latest amendments and Versions with supply of 4 nos of 10G SFP+ Singlemode optical transceiver modules. Inspection by RITES | — | — | — | 2,75,054.6 | |
| — | 1.00 | — | — | ||
| Supply of optical fiber splicing machine as per Technical Specifications attached as Annexure -A.Inspection by CONSIGNEE | — | — | — | 1,21,500 | |
| — | 1.00 | — | — | ||
| Supply of optical time domain reflectometer(otdr) as per Technical Specifications attached as Annexure -A.Inspection by CONSIGNEE | — | — | — | 78,600 | |
| — | 16.00 | — | — | ||
| Supply, installation testingand commissioning of Media Converter fiber to Ethernet100 base T Single modefiber with all requiredaccessories including AC230 V to DC Power adapter,as per Clause No. 16 ofRDSO Specn. RDSO/SPN/TC/103/2013 orlatest. Inspection by Consignee. | — | — | — | 95,464.16 | |
| — | 10.00 | — | — | ||
| Supply of Laser Jet Mono Computer Printer as per Technical Specifications attached as Annexure -A.Inspection by CONSIGNEE | — | — | — | 1,29,270 | |
| — | 12.00 | — | — | ||
| Supply and installation of OFC integrated access device 1 U height of 1.5 U height/19" rack mountable for SCADA purpose, Optical module intgerating in the unit supporting duel core OFC and one 100 Mbps ethrnet port, optical distance support to be 25 Kmtrs. Unit to support : a) One E&M module supporting eight 2W/4W ( each Port configurable) b) One ETH module to support SCADA , Eth data and one telnet/SNMP port balance one a lot empty. Unit to support dual AC/DC/ power supply. One no cable to be provided along with for E&M ; FABIO/4CS/OFC/DC & module 2W/4W & Eth module Make: Team engg/Fabio/Waves/MRO Tek or similar.Inspection by RITES | — | — | — | 5,30,055.96 | |
| — | 40.00 | — | — | ||
| Supply of appropirate OFC patch cords(1.5 m) for connecting FABIO or TANSY or similar with FDMS.Inspection by CONSIGNEE | — | — | — | 4,781.6 | |
| — | 12.00 | — | — | ||
| Supply and Installation of Fibre distribution management system including accessories complete as per RDSO specification No. RDSO/SPN/TC/037-2000 (Rev 2) suitable for termination of two nos 24 fibre OFC at Repeater station .Inspection by CONSIGNEE | — | — | — | 3,08,115 | |
| — | 26.00 | — | — | ||
| Supply, installation, testing and commissioning of Station Telephone Unit (Master Telephone) of electronic L.C. Gate Telephone System, with voice recorder & Surge Protection & Line Connection Unit/Circuit as per RDSO Spec No. RDSO/SPN/TC/51-2021 (Rev.-1.0) with latest amendment/revision. Inspection by RDSO/RITES | — | — | — | 10,88,867 | |
| — | 40.00 | — | — | ||
| Supply, installation, testing and commissioning of Gate Telephone (Slave Telephone) of electronic L.C. Gate Telephone System, with voice recorder & Surge Protection & Line Connection Unit/Circuit as per RDSO Spec No. RDSO/SPN/TC/51-2021 (Rev.-1.0) with latest amendment/revision". Inspection by Consignee. | — | — | — | 1,67,456 | |
| — | 20.00 | — | — | ||
| Supply, installation, testing and commissioning of Centralized Power Supply System (24+12VDC) along with M.F. Batteries of electronic L.C Gate Telephone Systems with surge protection arrangements as per RDSO Spec No. RDSO/SPN/TC/51-2021 (Rev.-1.0) with latest amendment/revision. (Warranty Period: Up to 30 months from the date of supply)". Inspection by RDSO | — | — | — | 1,12,928 | |
| — | 20.00 | — | — | ||
| Supply of Clamp Meter, 3.5 digit display, True RMS, capable of measuring AC/DC current up to 2000 A, equivalent to MECO Model 2003A+.Supplied complete with battery, test leads, user manual, and manufacturer's test certificate. Make/Brand:Meco.Inspection by CONSIGNEE | — | — | — | 1,54,143.4 | |
| — | 80.00 | — | — | ||
| Final location joint survey of proposed cable route plan (Quad/OFC cable) and submission for approval of Railway.The details instruction / guide lines regarding joint survey and preparation of cable route plan will be provided by Divisional office. Contractor will submit two copies of prints with soft copy to checking by Railways. If alterations are suggested by Railways, then again two copies of prints will be provided for advance approval after carrying out all the alterations as suggested / proposed by Railways. Tracing will be provided to approval by Railway. All drawings will be prepared in CAD. It also includes preparation and submission of final cable route plan on 75 microne standard polyster film which includes details of entire section in which quad / OFC cables are laid. Once Railway has approved and signed tracings for cable route plan then contractor will submit 6 (six) sets of zerox copies for cable route plan in proper binding form.Inspection by CONSIGNEE | — | — | — | 86,244 | |
| — | 50.00 | — | — | ||
| Splicing of Optical fiber cables (2 X 48 Fibers) and testing. This included excavation of pit & its backfilling, supply of all type of relevant materials and any other equipment of all types. | — | — | — | 9,58,465 | |
| — | 92000.00 | — | — | ||
| Laying of OFC/Quad cable/Power cable/CAT- 6 cable/PA Cable/Data cable and all the other types of telecom cable through HDPE pipe/casing capping/fall ceiling with laying/fixingc HDPE pipe/casing capping/PVC pipe for connecting/ interfacing various components and system..Inspection by CONSIGNEE | — | — | — | 4,77,480 | |
| — | 92.00 | — | — | ||
| Excavation of cable trench of 300mm wide and 800mm deep as per approved cable route plan on concrete platform/pukka surface/Track/Pitched/stone/Rocks/ Brick paved surface/chiseling/ blasting of rocks and back filling after laying of HDPE Pipe/Telecom cable, ramming of the soil in trenches and consolidation of soil & restoration of surface. This also includes clearing of temporary obstruction on the selected routes.Inspection by CONSIGNEE | — | — | — | 93,60,371.64 | |
| — | 92.00 | — | — | ||
| Blowing / drawing of OFC cable in the HDPE pipe duct and in protective works already provided.Inspection by CONSIGNEE | — | — | — | 8,32,890.72 | |
| — | 12.00 | — | — | ||
| Fabrication and erection of Emergency Rail post complete with Emergency socket box made of FRP material as per Spec. No. RDSO/SPN/TC/44/2002 Ver.2 (With latest amendment) and its wiring alongside the Rly. Track at locations to be indicated by the engineer (Rail post shall be supplied by Railway and issued to the contractor for execution. Emergency Socket & Emergency socket box will be procured through separate schedule of this contract and issued to the contractor forexecution). All other items shall be supplied/arranged by the contractor. Inspection by Consignee. | — | — | — | 16,349.64 | |
| — | 12.00 | — | — | ||
| Fixing of Emergency socket box made of FRP material as per Spec. No. RDSO/SPN/TC/44/2002 Ver.2 (With latest amendment) at locations to be indicated by the engineer . Emergency Socket & Emergency socket box will be procured through separate schedule of this contract and issued to the contractor for execution). All other items shall be supplied/arranged by the contractor.Inspection by CONSIGNEE | — | — | — | 9,760.8 | |
| — | 1500.00 | — | — | ||
| General concrete work in cement, coarse sand and aggregate ratio 1:3:6 scattered at different places for items not covered in above schedule. Volume of foundation also includes volume of C.I. base, anchor bolts. Coarse sand, aggregate 25mm and cement to be supplied by contractor.Inspection by CONSIGNEE | — | — | — | 41,54,220 | |
| — | 20000.00 | — | — | ||
| Loading, Leading & unloading of materials from site/any store to any site/store/any other store of railways as per instruction of site incharge by contractor. Contractor have to make proper record and stacking of the materials(Note: This subject item cannot be employed for the conveyance of materials issued or deposited in jammu division stores for this work.) | — | — | — | 1,11,400 | |
| — | 10.00 | — | — | ||
| Installation of Unit Maintenance Free Earth as supplied under item no. 13.3 of Chapter 13 of SOR . It includes ( i ) Digging the earth tothe required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 200 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness of 250 micrones to made requirement of under writer's laboratories (UL) 467-2007 or latest. Copper strips of 200 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential busbar,copper strips of 200 mm x 25 mm x 6 mm sub equip- potential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installations of this item shall be carried out by the contractor as per RDSO Specn. No.RDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No.S DO/RDSO/E&B/001 or latest. Earth to be installed and commissioned as per TAN and OEM or authorized vendor will give commission certificate for commission of Maintenance Free Earth. (Also refer to technical chapter attached).Inspection: Consignee | — | — | — | 67,509 | |
| — | 80.00 | — | — | ||
| Installation, Testing & Comissioning of Single mode Single Fibre 10G SFP module compitable to Layer 3 core switch .The work is to be executed as per the instruction of Railway Site Engineer. | — | — | — | 6,380.8 | |
| — | 2.00 | — | — | ||
| Supply ,Installation, Testing and Commisioning of Hybrid IP-PBX with 1 CPU and 1 DC Power Supply with License for 8 Slots. Expandable up to 120 analog ports, 48 digital ports, 24 Analog Trunks, 999 IP Users, 99 VOIP Trunks, 40 GSM Ports, 8 T1/E1 ISDN PRI ports. The system is configured for 32 Analog Extensions, 32 Digital Ports and PRI card along with software and configuration with CORAL Exchange.Inspection By Rites | — | — | — | 3,83,758.66 | |
| — | 2.00 | — | — | ||
| Supply ,Installation and Commissioning of MDF with Krone Modules..Inspection By consignee | — | — | — | 33,015.34 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialconditionTelecomm.pdf
ATTACHMENT
SpeicalconditionsofworkSignal.pdf
ATTACHMENT
IRGCCApril2022andcorrectionSlip.pdf
ATTACHMENT
StandardTenderDocument2022andcorrection.pdf Standard Tender Documents with correction
ATTACHMENT
Annexure-A-combinedspecs.pdf
ATTACHMENT
StandardTenderDocument2022andcorrection.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .