ADDN/ALTN TO STN HQ BUILDING AND P-224 IN LPTA SQUADRON FOR INDUCTION OF MEAT SYSTEM AT AF STN KALAIKUNDA

Amount

M&L Brick work with sub-class "B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

M&L reinforcement deformed or twisted bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 2 here-in-before but 8mm dia bar, complete all as specified and as directed.

All as per item No 2 here-in-before but 5mm to 10mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Use and waste for formwork to sides and soffits flat of beams, lintels, cantilevers, shelves including supports etc complete all as specified and as directed.

Use and waste for formwork to sides and soffits of suspended slabs such as roof slabs,floor slabs, landings and similar works; not exceeding 200mm thick(Horizontal or slooping) complete all as specified and as directed.

Use and waste for formwork to chullah hoods,chajjas, troughs and similar items including edges complete all as specified and as directed.

M&L for RCC nominal mix type B1 1:2:4 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and as directed

M&L for RCC nominal mix type B1 1:2:4 using 20mm graded stone aggregates) as in chajja complete all as specified and as directed.

M&L reinforced cement concrete type B1 1:2:4 (20mm graded agg ) as in beams, cantileavers, bressummers, lintels over 1.5 clear span etc complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster CM 1:6 on fair faces of brick work or vertical concrete surfaces complete all as specified and as directed.

M&L for rendering 5 mm thick cement plaster CM 1:3 on fair faces of ceiling concrete surfaces complete all as specified and as directed.

S&F GI frame work for seamiess ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm seuspended from soffit at approx 900 mm centre to centre with GI cleat and steel expention fastener with and including ceiling section(not exc 1.2 m length of 0.55mm thickness having kuried web of 50 mm and flange of 26 mm each with clips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L providing and fixing Gypsum board 12 thick in ceiling fixed with screw as per manufacturing and instruction complete all as speified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats distemper oil emulsion paint over a 3mm thick wall care putty complete all as specified and as directed.

M&L providing and fixing 10mm thick plaster of paris ceiling (gypsum anhydrous) to flat surface,curved surface for any sunk or raised moulding over reinforced with G.I wire mesh(G.I wire mesh paid separatey) complete all as speified and as directed.

S&F Galvanised mild steel wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks,or galvanised wire staples complete all as speified and as directed.

S&F Anodised aluminium frame for doors, windows,ventilstors with one or more rebates including joining cleat for fixing etc. complete all as specifed and as directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips,rubber neoprene packing,handles 2 Nos in each door,hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips,rubber packing,anodised anodised aluminium snap beading screws etc. complete all as specified and as directed.

S&F 5.0 to 5.5 mm thick sheet glass plain or tinted in panel for aluminium windows, doors,partitions etc with glazing clips, rubber beading solar control film 25 micron reflective type complete all as specifed and as directed.

S&F Aluminium door locks any type suitable for aluminium doors complete all as specifed and as directed.

S&F Anodised aluminium gril of mess size 75mmx75mm with frame including arrangement to recive wire mesh of aproved colour minimum thickness of anodised 15 micron and design etc complete all as specified and as directed.

S&F vertical venetion blind of best quality of required size complete as approved by Engr-in-charge all as specified and as drirected.

M & L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion (Anti fungal) paint over a coat of primer on chajja, facia etc complete all as specified and as directed.

M & L for preparation of old surface of walls chajja, facia and applying one coat of acrylic emulsion paint (wheather coat) complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic Emulsion any tint over a coat of primer on walls complete all as specified and as directed.

M&L for roughning of old concrete floor by picking, sweeping clean and washing down with water to remove dust & brushing neat cement slurry @ 3 Kg/Sqm, complete all as specified and directed.

M&L 15mm screed bed or bedding layer of cement mortor 1:4 for laying floor finishes complete all as specified and directed.

S&F light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm), in floors etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 10mm thick rendering CM 1:4 on fair faces of brick work or concrete surfaces for wall complete all as specified and directed.

S&F light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm),but as on vertical surfaces such as skirting/dados and risers to steps etc complete all as specified and directed.

S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

M&L rotational moulded polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in position all as specified in 500 ltrs capacity with15mm HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed.

M&L providing cement concrete type C1 1:3:6 (20mm graded agg ) as in coping, kneelers apex stone bed plates etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in cills, coping, padding, benching on chajjas, kerbs, mud stops, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete for wall, roof etc surfaces in CM 1:4 mixed with liquid water proofing compound as per manufacturer's instructions, finishing surfaces even and smooth with out using extra cement, complete all as specified and directed. Note: - Supply of Liquid water proofing compound shall be measured and paid separately as per manufacture's instructions under appropriate item.

Supply only liquid water proofing compound.(Make : Fosroc/Pidilite/Bauchemic India/Sikka)

M&L for providing roof treatment complete all as specified and directed as described in the following process: - i) Applying a coat of cold applied polymeric modified bituminous primer @ 0.30 Kg/Sqm. ii) Providing APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick with mineral finish on top, reinforced with polyester non-woven fabric (weight not less than 160 gms/sqm) laid on primed surface by torch application as per the manufacturer's instructions with side over lap of 75mm and end over lap of 100mm. iii) Applying a coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm complete all as specified and directed..

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth ; for foundation, etc. getting out in soft / loose soil complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and directed.

Spreading and levelling in layers n.exc 25cm thick and well ramming including watering as required.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregate) in foundations, filling, mass concrete etc complete all as specified and directed.

M&L RCC M-25(Design Mix) (using 20mm graded stone aggregate) as in foundations including rafts, footings, foundation beams, plinth beams, bases of column, basement slabs, under-reamed piles and in mass concrete complete all as specified and as directed.

M&L RCC M-25(Design Mix) (using 20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L RCC M-25(Design Mix) (using 20mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L RCC M-25(Design Mix) (using 20mm graded stone aggregate) as in Chajja and the like complete all as specified and as directed.

M&L RCC M-25(Design Mix) (using 20mm graded stone aggregate) as in slab supported on walls, beams and collumns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and as directed.

M&L for Hardcore of gauge not exceeding 63 mm, og broken stone or boulders deposited,spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed

M&L for 100 mm thick Plain cement concrete ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.

M&L 25mm thick Plain cement concrete type B-1, 1:2:4 (using 20mm graged stone aggregate) in floors finishing concrete surface fair and even complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM(1:3) complete all as specified and as directed.

S&F Non-skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per item No 57 here in before but fixed to walls as in skirting/dado, complete all as specified and as directed.

M&L for 75 mm thick Plain Cement Concrete ( 1:3:6 ) type C-2 using 40mm graded aggregate as in plinth protection finishing the surface even and fair without using extra cement including making joints . Joints shall be filled with bituminous mastic in propotion of bitumen and sand 1:2 complete all as specified and directed.

M&L for 12mm thick plaster on fair faces of brick work or on concrete surfaces, in cement mortar (1:6) finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick plaster in two layers ( 10mm +5mm ) on fair faces of brick or concrete surfaces in CM 1:4 with WPC on second layer finished the surface even and fair without using extra cement complete all as specified and directed ( supply only WPC shall be measured and paid separately).

M & L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement, complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying three coats of cement paint complete all as specified and as directed.

Material & Labour preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete as specified and directed.

S&F MS hold fast and other small articles made out of mild steel flat iron complete all as specified & as directed.

M&L plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in hold fast block etc including necessary formwork complete all as specified and as directed.

M&L Treating small articles such as holdfast with Tar or coaL tar black paint complete all as specified & directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed.

S & F Mild Steel sliding door bolts, 300mm long, plate type, stove enamelled black with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and as directed.

M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.

M&L for 15mm thick screed bed or bedding layer for laying floor finishes in CM(1:3) complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster of any description on brick walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 25mm thick Plain cement concrete type B-1, 1:2:4 (using 20mm graged stone aggregate) in floors finishing concrete surface fair and even complete all as specified and as directed.

M & L 50 mm thick cement concrete (1: 2: 4) type B-1 using 20 mm graded stone aggregate as in floors and pavings etc, finishing surfaces of concrete even and smooth without using extra cement complete all as specified and directed.

Material and labour for forming Contraction joints 65 mm deep x 10 mm wide , filled with Grade ' A' sealing compound complete all as specified and directed.

M&L Precast RCC slab 1:2:4, type B1(using 20mm graded stone aggregate) as in slab, landings, chajjas,water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed.

S & F for 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in aluminium frame work complete all as specified and as directed.

M & L for concealed point wiring for one light/fan/Bell point with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn through and including concealed medium grade PVC conduit ISI marked of size 20mm dia, with all accessories (PVC Casing and caping to be done wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly, including supply and fixing of GI modular sunkun box ( terminal box) and suitable size modular cover plate for mounting of moudular fittings like switches, sockets, fan regulators etc. complete all as specified and directed by EIC. Note : (i) Circuit wire from DB to switch board is included in unit rate of point wiring. (ii) Distance of point from switch baord up to 15 mtr to be considred as one point. (iii) Wiring to be done with FRLSH wire single core, mutistranded copper conductor and as per approved colour code in IE rule. (iv) Above rate includes cost of chase cutting for concealed wiring.

All as per item No 83 here-in-before but for 3 pin 5 Amps switch socket combination on independent board with other switch, complete all specified and as directed.

All as per item No 83 here-in-before but for 3 pin 5 Amps socket outlet on the same board with other switch, complete all specified and as directed.

All as per item No 83 here-in-before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for AC point on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and as directed. .

All as per item No 83 here-in-before but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and as directed.

S & F modular socket outlet, 2-in-1, 5 pin, 6 Amps, 240 volts, 2 module, complete all specified and as directed.

S & F modular socket outlet multipurpose, 5 pin, 6/16A and one pin 6 Amps controlled by one switch, 2 module, complete all specified and as directed.

S & F modular switch one way, 16A, 1 module, complete all specified and as directed.

S & F modular fan regulator, 120W, 2 module, complete all specified and as directed.

S & F modular switch one way, 6A, 1 module, complete all specified and as directed.

S & F modular bell push one way, 6A, 1 module, complete all specified and as directed.

S & F ceiling rose surface type bakelite 65x50mm three terminals, complete all specified and as directed.

S & F musical call bell, AC, 230 volts, single pole, complete all specified and as directed.

S & F LED light fittings , recessed mounting , 600 mm x 600 mm, 36 watt, having efficient LED glare free soft illumination, white powder coated housing with LEDs, seamless front frame with flate white high tramission acrylic cover including all hanging arrangement and fixing by providing hanging chain and providing electric connection from ceiling rose with PVC insulated, PVC sheathed, 1.5Sqmm x 3 core copper conductor cable complete all as specified and as directed by Engr-in-Charge. (Make:- Bajaj Cat No:- BZRSQL 36W Gzi WH LED (CW cool white) equivelant in Havells / C&S / Crompton. Notes:- (i) The contractor shall produce type test certificate LM 79, LM 80 for LED fittings. (ii) The contractor shall warranty certificate of light for two years from date of completion of contract. (iii) Colour temp of light shall be 6500 k.

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, double door with 63 Amp, 25 KA,TP MCCB as incomer (Vertical type double door, 63 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including flushing and fixing DB box in neatly in wall complete all as specified and directed by Engr-in-charge. Note : (i) MCCB and DB box shall be of same make.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size aluminium / copper lugs complete all as specified and as directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A, SP ,240 V, 'C' curve, complete all as specified and as directed.

M&L for of Sub-main wiring in and including PVC conduit with 2 runs of FRLS PVC insulated unsheathed multstranded soild/stranded copper conductor 4.0 sqmm with 1 x run FRLS PVC insulated unsheathed soilid/stranded copper conductor 4.0 as earth continuity conductor and connected to earth dolly complete all as specified and as directed. Note : The above rates includes three runs of PVC insulated copper conductor 4 Sqmm FRLH cable and one run of ISI marked PVC conduit medium grade of 25 mm dia.

M&L for Sub main wiring with four run single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but including non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 6 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and as directed. Note : The above rates includes four runs of PVC insulated copper conductor 6 Sqmm FRLH cable and one run of ISI marked PVC conduit medium grade of 25 mm dia.

Supply, Installation, testing and commissioning of room air conditioner unit of 2.0 TR capacity (Split type unit comprising of indoor and outdoor unit) electric driven (single phase 230 Volt, 50 Hz) and with inbuilt air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2, including necessry fixing arrangement complete (indoor unit at suitable place and height inside the room and outdoor unit at suitable place outside the room ) as per existing position including metallic bracket with fixing bolts for outdoor unit, insulated piping etc. complete all as specified and as directed. Note:(i) The refrigerant of Air conditioner shall be in compliance of Non-CFC norms.(ii) Air conditioner shall be initial filled/charged with refrigerant of specified quanty.(iii) Additional refrigerant pipes required beyond as supplied by manufacturers deemed to be included in AC rate (iv)The refrigerant to be used shall be of Non CFC compliance and HFC type like R-410 A/R-407 C as per the latest tecnnology.(v) Suitable piping shall be provided of adequate length of size 5/8" for draining of condensate water from indoor unit.(vi) Split type AC unit to supplied with cordless remote control for operation.

Supply, install and testing 5 KVA wall mounted Voltage stabilizer for automatic operation, single phase, naturally air cooled, indoor type & designed for input variation between 170 V to 260 V with output voltage stabilized at 220 with accuracy ± 3% and speed of correction 8 Volts per second and of capacity, complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, bracket light, switch socket outlet, tube light fittings etc and making good disturbed surfaces of walls, floors with cement mortar and applying white/colour wash to match with existing surfaces etc complete all as specified and directed.

M & L point wiring with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLS cable drawn in & including PVC casing caping of 25 mm wide, one light point/fan point,call bell/socket 5 Amp point independent controlled by one switch, with double locking type, including all accessories casing caping as approved by EIC, with PVC 1.5 sqmm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, including sunken in cast iron/MS terminal box duly painted with aluminum paint inside and anticorrosive paint out side with 2.8 mm thick backlite hylem sheet cover, ISI for mounting switch & sockets for the following:-(Circuit wire from DB to switch board is included in point wiring. Distance of point from switch board up to 15 mtr to be considered as one point).

All as per item No. 105 here in before but for 6 pin 15 Amps socket outlet on independent board with 4.0 sqmm PVC insulated and unsheathed single core multi stranded copper conductor cable 1100V grade and one 4 sqmm PVC insulated and unsheathed stranded copper cable for earth continuity conductor complete all as specified and directed.

M & L for concealed point wiring on wall and surface wiring on ceiling / roof with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled ERW rigid steel conduit (metallic) with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC-FR insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for one light, fan point controlled by one switch.

S&F Switch socket combination, 2 in 1, 3 pin, 5 & 15 amps flush type, universal complete all as specified and directed.

S &F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and directed by Engr-in-Charge.

M & L LED tube light fitting flameproof type FLP-WP of T8 1x18/20 watt including integral reflector made of alluminium alloy LM6 ,connector block, etc.and all accessories pre-wired and including connecting up with twin core twistedflexible copper conductor with suitable size complete all as specified and as directed.

S& F piano switch, single pole, one way, 5/ 6 amps, 230V, ISI marked complete all as specified and as directed.

S&F flame proof weather proof metallic hose conduit 3/4 " dia 300mm long complete all as specified and directed by Engr-in-Charge.

Taking down existing u/s fitting any type any size and S&F LED 18 Watt tube light fitting (T8 type) , including LED retrofit LED Tube 18 W , 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficiency > 100Lm/W, complete with powder coated CRCA decorative box type batten suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed.

S&F Street light fitting of 45 Watt LED made up of die cast housing toughed glass and individual LED's with secondary optics and IP 66 protection including connection with pole junction box, tecting complete all as specified and directed by Engr-in-Charge. (Make:- Bajaj Cat No:- BRTFG 45W LED I equivelant in Havells / C&S / Crompton. Notes:- (i) The contractor shall produce type test certificate LM 79, LM 80 for LED fittings. (ii) The contractor shall warranty certificate of light for two years from date of completion of contract.

M&L for sub main wiring in wall with two run of 4.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor ,1100 volts grade and one run of PVC insulted unsheathed multistrandded copper conductor cable (FRLS) of size 4.0 sqmm + 1 x 4.0 sqmm, 1100 volts grade as earth continuity conductor (as per colour code) drawn through in and including PVC casing caping (medium grade) but not less than 25mm width and all accessories such as bends, elbow, tee etc. in any type of wall/ ceilling, plastering and making good disturbed surface as per existing complete all as specified and as directed.

M&L for sub main wiring in wall with four run of 6.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor ,1100 volts grade and two run of PVC insulted unsheathed multistrandded copper conductor cable (FRLS) of size 6.0 sqmm + 1 x 6.0 sqmm earth wire, 1100 volts grade as earth continuity conductor (as per colour code) drawn through in and including PVC casing caping (medium grade) but not less than 25mm width all accessories such as bends, elbow, tee etc. in any type of wall/ ceilling, plastering and making good disturbed surface as per existingall complete all as specified and as directed.

S&F Flame proof exhaust fan of sweep 380mm, including all civil work required on site for cutting of wall making opening and make good as per existing after fixing the exhaust fan complete all as specified and directed.

Supply, Installation/fixing , testing and commissioning of Air conditioner unit of 1.5 TR capacity (Split type unit comprising of indoor and outdoor unit) electric driven (single phase 230 Volt, 50 Hz) and with inbuilt air ioniser and plasma filter for better indoor air quality with minimum BEE 5 star rating split Inverter AC, with copper tube condensor with non CFC gas,including necessry fixing arrangement complete (indoor unit at suitable place and height inside the room and outdoor unit at suitable place outside the room) including metallic bracket with fixing bolts for outdoor unit, insulated piping etc. all as directed by Engr-in-Charge.Make-Bluestar/Voltas/Hitachi. Note:(i) Aircoditioner shall be initial filled/charged with refrigerant of specified quantity.(ii) Additional refrigerant pipes as required from outer unit to indoor unit on site (Max 7 mtr) beyond as supplied by manufacturers deemed to be included in AC rate (iii) Suitable piping shall be provided of adequate length of size 5/8" for draining of condensate water from indoor unit.(iv) Split type AC unit to supplied with cordless remote control for operation.

Supply, install and testing 4 KVA wall mounted Voltage stabilizer for automatic operation, single phase, naturally air cooled, indoor type & designed for input variation between 170 V to 260 V with output voltage stabilized at 220V with accuracy ± 3% and speed of correction 8 Volts per second and of capacity, complete all as specified and as directed.

S&F door closure hydraulically regulated designation No 3 universal type, suitable for door shutter aluminium, (extruded section) of 851 to 1000mm in width and of weight between 61 to 80 Kg, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) on roof floors n. exc 15 cm thickness (other than ground floors) complete all as specified and as directed.

MS R.K.ENTERPRISE

Guru Charan Mahata

SUMAN CONSTRUCTION

Neha Enterprise

CASTLE BUILDERS

RADHESHYAM GUPTA

SHARMA ENTERPRISES