NIT-18

Amount

SCHEDULE 'A' PART-I : BOQ OF WORKS FOR E/M WORKS.

Disconnecting the electric connections and taking down distribution boxes (any type) including MCBs and making good to the disturbed surfaces to match the existing surface, complete all as specified and as directed by Engineer-In-charge.

Taking down unserviceable any type of submain wiring etc and making good the disturbed surfaces of walls/ floor etc matching with the existing surface, complete all as specified and as directed by Engineer-In-charge.

Sub main wiring (concealed conduits to surfaces) for circuits/ sub main wiring alongwith earth wire with two run of 4.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 2.50 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed by Engineer-In-Charge.

Sub main wiring (concealed conduits to surfaces) for circuits/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 4.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed by Engineer-In-Charge.

Point wiring (in existing concealed conduits to surfaces) for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, 1100 Volts, using colour coding, drawn in exisiting any type of conduit, of any dia including all accessories concealed in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Description all as serial item No- 1.05 here-in-before but for one 3- pin, 5-Amps, socket outlet on same board.

Description all as per serial item No- 1.05 here-in-before but for one 3-pin socket outlet 5-Amps on the independent board.

Description all as per serial item No- 1.05 here-in-before but for one light point controlled by two way switches.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed by Engineer-In-Charge.

Point wiring (in existing concealed conduits to surfaces) for 3-pin, 15 Amps, switch socket combination on independent board with 2.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in and including any type of conduit, any dia including all accessories concealed by chasing/ cutting in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 2.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Point wiring (in new concealed conduits to surfaces) for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Description all as serial item No- 1.11 here-in-before but for one 3- pin, 5-Amps, socket outlet on same board.

Description all as per serial item No- 1.11 here-in-before but for one 3-pin socket outlet 5-Amps on the independent board.

Description all as per serial item No- 1.11 here-in-before but for one light point controlled by two way switches.

LED tube light fitting, 20 watt, indoor decorative high lumen batten, including LED lamp 20 Watt (yellow/white) and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- E-Lite LED Curve LHEXBXPNIN1W020 or equivalent in Philips/ Osram.

Lamp holder, PVC Polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-In-Charge.

Point wiring (in new concealed conduits to surfaces) for 3-pin, 15 Amps, switch socket combination on independent board with 2.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 2.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Stepped type (multi-steps) electronic regulator for ceiling fan 1200 mm, 240 volts, 100 Watts, single pole, including connecting, complete all as specified and as directed by Engineer-In-Charge.

Capacitors, capacity 2.50 mfd, suitable for ceiling fans of any type and size, complete all as specified and as directed by Engineer-In-Charge.

Bell push switch, single pole, one way, flush type, 5-Amps, 240 volts, complete all as specified and as directed by Engineer-In-Charge.

Socket outlet, 2-in-1, 3-pin, 5-Amps, flush type, complete all as specified and as directed by Engineer-In-Charge.

Switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and as directed by Engineer-In-Charge.

Switch piano, flush type, single pole, two way, 5 Amps, complete all as specified and as directed by Engineer-In-Charge.

Socket outlet, 2-in-1, 3-pin, 5 and 15 Amps, flush type, complete all as specified and as directed by Engineer-In-Charge.

Switch piano, flush type, single pole, one way, 15 Amps, complete all as specified and as directed by Engineer-In-Charge.

Ceiling rose, three phase/ PVC/ polycarbonate, isolated body, complete all as specified and as directed by Engineer-In-Charge.

LED retrofit lamp, capacity 5 Watt, B-22 holder base with ploycarbonate body and aluminium heat sink, warm/ white light, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- LHLDEUEEMK8R005 or equivalent in Philips/ Wipro.

Industrial Bulkhead luminaire environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LED lamp 10 Watt and fixing in repairs with materials such as clamps, nuts, bolts, washers etc completed, complete all as specified and as directed by Engineer-In-Charge. Make: Havells Cat Part No- Rugby Neo NFT10WLED860SSYMTOPC or equivalent in Philips/ Bajaj.

LED retrofit lamp, capacity 5 Watt, E-27 holder base with ploycarbonate body and aluminium heat sink, warm/ white light, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- LHLDEUHEML8R005 or equivalent in Philips/ Wipro.

Door bell, AC, 230 Volts, single pole, ding-dong type sound, completeall specified and as directed by Engineer-In-charge.

Point wiring (in new concealed conduits to surfaces), modular type for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of modular boxes, modular cover plates and different types of modules including anti-corrosive screws shall be deemed included in quoted rate.

Description all as serial item No- 1.31 here-in-before but for one 3- pin, 5-Amps, socket outlet on same board.

Description all as per serial item No- 1.31 here-in-before but for one 3-pin socket outlet 5-Amps on the independent board.

Description all as per serial item No- 1.31 here-in-before but for one light point controlled by two way switches.

Point wiring (in new concealed conduits to surfaces), modular type, for 3-pin, 15 Amps, switch socket combination on independent board with 2.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and including FRLS PVC green insulated unsheathed 2.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of modular boxes, modular cover plates and different types of modules including anti-corrosive screws shall be deemed included in quoted rate.

Modular stepped type (multi-steps) electronic regulator for ceiling fan 1200 mm, 240 volts, 100 Watts, single pole, including connecting, complete all as specified and as directed by Engineer-In-Charge.

Modular bell push switch, single pole, one way, 5-Amps, 240 volts, complete all as specified and as directed by Engineer-In-Charge.

Modular socket outlet, 2-in-1, 3-pin, 5-Amps, complete all as specified and as directed by Engineer-In-Charge.

Modular switch piano, single pole, one way, 5 Amps, complete all as specified and as directed by Engineer-In-Charge.

Modular switch piano, single pole, two way, 5 Amps, complete all as specified and as directed by Engineer-In-Charge.

Modular Socket 6Amps/ 16Amps, 2/3-pin combined, 2-module,, complete all as specified and as directed by Engineer-In-Charge.

Modular switch piano, single pole, one way, 15 Amps, complete all as specified and as directed by Engineer-In-Charge.

Slim, light in weight, regular electronic ballast, for single/ twin CFL/ FTL/ T-5 lamp, capacity 28 Watt, complete all as specified and as directed by Engineer-In-Charge. Make: Havells ordering cat part No- LHBT03128032 or equivalent in Bajaj/ Crompton Greaves/ Philips/ Wipro.

Electronic ballast, high frequency electronic ballast with current harmonic maintained as per international specification with improved power factor close to 0.99 suitable for 36/40 Watt FTL luminaires, complete all as specified and as directed by Engineer-In-Charge. Make: Havells ordering cat part No- LHBF07104026 or equivalent in Bajaj/ Crompton Greaves/ Philips/ Wipro.

Slim, light in weight, regular electronic ballast, for single/ twin CFL/ FTL/ T-5 lamp, capacity 18/ 20 Watt, complete all as specified and as directed by Engineer-In-Charge. Make: Bajaj ordering cat part No- LHBT01228033 or equivalent in C&S/ Havells/ Crompton Greaves/ Philips/ Wipro.

Sheet metal enclosures for Triple Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-43, 4-way with 200 amps rated busbar, 240 volts, as per IS-8623, complete all as specified and as directed by Engineer-In-Charge.

Sheet metal enclosures for Single Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-43, 8-way with 200 amps rated busbar, 240 volts, as per IS-8623, complete all as specified and as directed by Engineer-In-Charge.

MCB, four pole, 63 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

MCB, double pole, 40 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

MCB, single pole, 6 to 32 Amps, 240 Volts, 50 Hz, including necessary incoming and out going electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

Electrical conduit, flexible, PVC(polyvinyl chloride), hard, fireproof, 25mm dia, for protection of open cables/ wires as exposed to view, complete all as specified and directed by Engineer-In-Charge.

Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 4.0mm dia GI wire as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 20mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.

Taking down existing electric meter carefully from the meter box and re-fixed the same in the new location including PVC enclosed meter box alongwith suitable cut out and making good to the disturbed surfaces to match the existing surface, complete all as specified and as directed by Engineer-In-charge. Note: Any damage to the electronic metre during taking down or reinstallation shall be borne by the contractor without any extra cost to Govt.

PVC insulated FRLS cable with multi-stranded copper conductor 1100 volt grade, size 6.0 Sqmm for connection from MCB distrubition board to Electric Meter by using clips in Meter box, complete all as specified and as directed by Engineer-In-charge. Note: Two runs of cable shall be measured as one unit of length.

Supply and fixing in replacement, 1100 Volts grade, heavy duty, multi-stranded cable, PVC insulated aluminium conductor, multi-stranded, cross sectional area 16 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1.0 metre apart Including 4.0mm suspension wire, one twin core cable flat or circular, complete all as specified and as directed by Engineer-In-Charge.

House service bracket for mounting light fittings House service bracket (hook type complete with 3.0mtr long galvanised iron pipe 40mm dia medium grade, two Nos 90° bends including mild steel clamps, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engineer-In-Charge.

LED wall/ surface mounted decorative luminaire, including LED lamp 10 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- Pluto Neo 2X2PLR28WLED857S or equivalent in Bajaj/ Philips.

House service bracket for mounting light fittings House service bracket any type complete with 1.50mtr long galvanised iron pipe 40mm dia medium grade, bent to required shape including mild steel clamps of flat iron 40x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engineer-In-Charge.

Street light fitting, Pressure die-cast IP 66 LED street light, including LED lamps of 30 to 36 Watt and connecting up with twin core twisted flexible copper conductor cable with suitable size, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- Endura Pearl SL30WLED757SASYTOPCMP/ Philips ordering code No- 910925863567 (Product Code: 871869637692800)/ Bajaj cat part No- 169913 .

LED tube light fitting, 10 watt, retrofit, 2-feet long, indoor decorative aluminium extruded LED battens, including LED lamp 10 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- Lumi Line Plus BS10WLED865SPCSS or equivalent in Philips/ Osram.

LED wall/surface mounted decorative luminaire, SS finish fixture with opal glass diffuser LED candle lamp of 8-Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part for light fitting- LHJE01106499, for lamp- LHLDETHEMD8X008 or equivalent in Bajaj/ Philips.

LED wall/ surface mounted decorative luminaire, wall mounting, SS finish fixture with opal PC diffuser LED candle lamp of 8-Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part for light fitting-LHJE01104499, for lamp- LHLDETHEMD8X008 or equivalent in Bajaj/ Philips.

LED wall/surface mounted decorative reading light, with flexible arms, pre-wired including LED lamp 10 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- LHLDEUEEML8R010 or equivalent in Bajaj/ Philips/ Wipro.

Energy/ electric meter enclosure/ box, made with mild steel angle or pressed metal frame including front openable door shutters of 3.15mm thick mild steel sheet having 6-Nos of mild steel hinges, locking arrangement etc, painted with two coats of olive green/ smoke grey synthetic enamel paint over coat of red oxide primer after preparation of external and internal surfaces of box, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge. Note: (i) Size of box shall be decided by Engineer-In-Charge as per site situation. (ii) A BOO shall be convene to find the actual weight of different sizes of boxes.

Hylem sheet 3.0mm thick, cut into size 9x12 inches or as required at site, making space for flush type switches, sockets, steeped regulators including fixing in repairs with anti-corrosive metallic screws, omplete all as specified and as directed by Engineer-In-Charge.

Plug and socket board, metal enclosure with 2-pole and earth, including MCB 40 Amps Single Pole and Neutral and all internal wiring with copper wire, making necessary connections, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- DHDPUSN020/DHDPUDP020 or equivalent in ABB/ Legrand/ L&T.

Amount of Schedule of credit of for Rs 1,63,106.00 shall be deducted from quoted amount.

PACHNANDA BUILDERS

Usha Engineering Co.