GE/BAS-58/2021-22 SPECIAL REPAIR TO BLDG NO NP-26 (OR LINE ACCN) AND MINOR WORK AT MADHOPUR MIL STN UNDER GE BASOLI.

Amount

Taking down steel window and ventilator with wire mesh/glazed shutter (Without taking of shutter from frame) area n exc 1.50Sqm each, complete all as specified and as directed.

Taking down chowkat with shutter (Without taking of shutter from frame) area exceed 1.50 Sqm but not exceed 4.00 Sqm each, complete all as specified and as directed.

Demolition of cement concrete (un reinforced )in ground floors and paving n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises of MD land,m complete all as specified and as directed.

Dismantling of existing water tank by unscrewing pipe connections and fittings, for capacity of tank exc 500 but not exc 1000 ltr from roof slab, complete all as specified and as directed.

Taking up or down steel tubing and connections of 15mm bore dia of pipe, complete all as specified and as directed.

Taking up or down steel tubing and connections of 20mm bore dia of pipe, complete all as specified and as directed.

Taking down cement plaster from brick or stone walls or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc , complete all as specified and as directed.

Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work, complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, build in any cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed.

Taking down soil pipes/waste pipe of any diameter and pettern including fittings, complete all as specified and as directed.

M&L rendering 15 mm thick brick walls with CM 1:6, finished even & smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on brick work or concrete masonry wall surface, finished even and smooth with out using extra cement mixed with water proofing compound, complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

Supply only integral Water Proofing Compound of approved make, complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:3) finished even and smooth in ceiling, complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:4) on verticle concrete surface for receiving of skirting/dado tiles, complete all as specified and as directed.

M&L for screed bed or bedding layer 15 mm thick in CM (1:6) for laying of floor tiles, complete all as specified and as directed.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . exc 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and as directed.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . exc 0.36 sqm ,in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile, complete all as specified and as directed.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n . exc 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450mmx300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6),type C-2 (using 40mm graded stone aggregate) in plinth protection etc.laid in alternate bays, complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified and shown on drawing.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side,.

S&F 35mm thick IInd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 35mm thick IInd class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); complete all as specified and as directed.

M&L for pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm complete all as specified and as directed.

M&L for pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm Complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats complete all as specified and directed.

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 118 mm and fixed with tinned tacks, or galvanized wire staples, complete all as specified and as directed.

S&F sheet glass ordinary quality 3mm thick with oil putty in area n.exc 0.5 Sqm in each pane, complete all as specified and as directed.

S&F figured pin headed glass 3mm thick with oil putty in area n.exc 0.5 Sqm in each pane, complete all as specified and as directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel,complete all as specified and as directed.

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

S & F Aluminium alloy 250mm long ,anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed.

S&F for 150mm long aluminum handles, cast type, anodized, complete all as specified and as directed.

S&F rotational molded, three layred, polyethylene water storage tank (Cylindrical vertical with closed tip) of 1000 ltrs hoisted and fixed in position on roof complete all as specified and directed in SSR-Part-I.

Supply and fixed gun metal gate valve 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

Supply and fixed ball brass valve, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply & Fixed 15mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary chasing and cutting in brick/concrete surfaces and making good the disturbed surface complete in all respect in CM 1:4, complete all as specified and as directed.

Supply & Fixed 20mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary chasing and cutting in brick/concrete surfaces and making good the disturbed surface complete in all respect as specified.

S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic seat cover , white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jet spray complete all as specified and directed.

S&F PVC flushing cistern low level ,10 lit. capacity including complete accessories, including making all connection to water pipe and seat,m complete all as specified and as directed.

S&F in repair aluminium anodised tubular towel rails 20mm dia "D" type 60cm long between flanges, complete all as specified and as directed.

S&F in repair 15 mm bore CP fancy type bib Taps long body with flange cast copper alloy with crutch or butterfly handle, screwed down , screwed for iron pipe, complete all as specified and as directed.

S&F in repairs 15 mm dia stop valves/angle valve , cast copper alloy,chromium plated screwed down, high pressure with crutch or butterfly handle, screwed for iron pipe in repair, complete all as specified and as directed.

S & F PVC connections 15 mm with PTMT nuts of length 450 mm, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall, complete all as specified and as directed.

S & F PVC SWR Bends in any radius 110 mm bore with access door in repair, complete all as specified and as directed.

M& L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair without using extra cement complete all as specified and directed.

M&L for roof treatment with the following specicification - (a) Removal of existing old treatment of any type and roughening surfaces of old concrete of picking sweeping and washing down with water (b) 15 mm thick cement plaster in CM 1:4 (c) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (d) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighting 3.5 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with Aluminium paint . The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application,m complete all as specified and as directed.

M &L for preparation new or previously untreated wood surface not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paints over a coat pink primer, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of Synthetic enamel paint over a red oxide etc, complete all as specified and as directed.

M&L Applying two coats of oil bound distemper with priming coat on plastered and other surface with alkali resistant priming paint of any colour or tint over a coat of putty including preparation of newly plastered surfaces of walls complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash on ceiling,m complete all as specified and as directed.

M&L for preparation of new plastered surface and applying three coats of white wash on wall, complete all as specified and as directed.

M & L for applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistence as per IS 15489:2004,Alkali & Fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon [email protected] litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface, complete all as specified and as directed.

S&F Curtain rod 20mm dia of ms powder coated with including PVC brackets , Stops, rollers etc. Complete all as specified and directed.

M&L for 18/19mm thick Prelaminated particle board,exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed to screws to timber frame work complate all as specified and directed.

M&L for Durastone / Endura heavy duty vitrified tiles of size 322mm x 322mm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cement mortarfinished cement concrete surface fair & smooth without using extra cement complete all as specified and directed.

M & L Providing Precast cement concrete type B0 1:2:4 (12.5mm graded aggregate ) set in cement mortar 1:4 louvers and jallies,25 mm thick ( measured solid) including all moulding, complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) type B-1(20 mmm graded aggregate) as in slabs, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like using 20 mm graded aggregate, complete all as specified and as directed.

M & L Mild Steel TMT bars 10mm dia and over cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with including mild steel wire (anneled) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

S&F in repair Vitreous China urinals, Half stall type, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing with flush pipe, grating and Union for discharge pipe. includinng provn of push type flushing system complete all as specified and directed.

S&F in repair vitreous china wash hand basin white Oval shape of Size 550 mm dia including supply of pedestal,bracket, cutting for and pinning the ends of brackets or erecting stands inclusive of waste pipe but including brass chromium plated waste coupling with long screwed shank and fly nuts complete all as specified.

S&F in repair CP Towel ring 1121 fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make :- Jaquar CAN 1121 N or equivalent in Kholar.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor, 100mm dia, sand cast pipes, complete all as specified and as directed.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor, 75mm dia, sand cast pipes, complete all as specified and as directed.

S&F 100 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured), complete all as specified and as directed.

S&F 75 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured), complete all as specified and as directed.

S&F cast iron trap 'P' or 'S' 100 mm,complete all as specified and as directed.

S&F 100mm dia Bends (any radius) with duck's foot or heet rest, complete all as specified and as directed.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 75mm dia, sand cast pipes including two coats of black Japan paint, complete all as specified and as directed.

S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), complete all as specified and as directed.

Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of UPVC underground drainage pipe (UDS) type 'B' 160mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n.exc. 50m complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B1, using 20mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, complete all as specified and as directed.

M&L 75mm thick cement concrete( 1:3:6), type C-2 ( using 40mm graded stone aggregate), finished even and fair, complete all as specified and as directed.

S&F stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type, complete all as specified and as directed.

S&F in repairs 125mm size brass chromium plated shower rose with swivel joints, complete all as specified and as directed.

S& F aluminium Peg set of six hooks size 50mm to 60mm, fixed with brass screws, complete all as specified and as directed.

S & F 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

S&F in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. complete including making good to floor complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall complete all as specified and as directed.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair, complete all as specified and as directed.

S & F Sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs ,washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 915 mm X 460 mm bowl size 410mm X 330mm X 160 mm all complete all as specified and as directed.

S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and as directed.

S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore, complete all as specified and as directed.

S&F Stainless Steel kitchen plate rack size 30"x30"x9" , design and shape as approved by the GE, complete all as specified.

S&F chromium plated PTMT shelves fixed with and including chromium plated brass screws and plastic cleats, complete all as specified and as directed.

M&L for applying two coats of oil bound distemper of any colour or tint including preparation of newly plastered surfaces of walls, complete all as specified and directed.

M&L preparation new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (any type ) for light, fan, socket or power socket complete including fittings such as switches sockets, ceiling roses pendants, regulators, lamp holders, brackets, light fittings etc and making good the disturbed surfaces of wall/floor/ceiling etc. Complete all as specified.Note : (a) All old material except fan and other items for which credit has mentioned in Sch 'A' part II shall be the property of the contractor after realisation of credit as per Sch of credit.

M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl PVC conduit concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire (green colour) to common earth dolly complete all as specified and directed . Note : (a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed.

All as per srl item No 99 here in before but one 3 pin socket out let 5 Amps on independent board.

All as per srl item No 99 here in before but one 3 pin socket out let 5 Amps on same board.

Point wiring with 2.5 Sqmm copper conductor cable FRLS (Multistranded ) PVC insulated and unsheathed cable in and incl PVC conduit concealed with pressed steel terminal boxes of adequate size with 3mm thick plastic laminated sheet cover for one 3 pin socket out let 15 Amp on independent board including continueous 2.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed Cable earth wire to common earth dolly complete all as specified.

S&F in replacement switch piano flush type single pole one way 5 Amps, complete all as specified and as directed.

S&F in replacement socket outlet 2 in 1, 3 pin 5 Amps flush type (Multi purpose), complete all as specified and as directed.

S&F in replacement switch combine socket 3 pin 15 Amps flush type (Multi purpose), complete all as specified and as drected.

S&F in replacement Ceiling rose surface polycarbonated, three terminals. Make - Havells/C&S/Polycab/Plaza /Anchor

S&F in replacement lamp holder polycarbonated body with back plate suitable for batten fittings, Make : Havells/C&S/Polycab/Plaza/Anchor

Supply and fix in replacement for fan regulator electronic flush type stepped (rotary type) with 5 steps speed control complete all as specified and directed

S&F in replacement LED tube light fitting. ,1x20w, 220v AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and as drected.

Supply and fix in repair for sheet metal enclosurefor DB's, powder coated versatile double door single pole and neutral (SPN) 08 way fitted with copper bus bar rated 200amps, neutral link , earth bar complete all as specified and directed, Make : Legrand/Indo Asian/ C&S

Supply and fix in repair for sheet metal enclosurefor DB's, powder coated versatile double door single pole and neutral (SPN) 04 way fitted with copper bus bar rated 200amps, neutral link , earth bar complete all as specified and directed, Make : Legrand/Indo Asian/ C&S

Supply and fix in repair for MCBs single pole and neutral (SPN) 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fix in repair for MCBs single pole and neutral (SPN) 63 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fix in repair for MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, Pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregated), 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT steels bars @ 100 mm C/C both ways with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc, including testing on completion complete all as specified and as directed. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

Supply and fixing LED street light fitting 35 watt 230 V AC ourdoor type with high pressure die cast aluminium hosing and heat resistance complete with driver, lamp bracket with impact and corrosion resistance including thermal management in multiplr optics complete with ip 65/66 protection complete.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 25 sq mm 3.5 core including taking out old burnt, unserviceable cable complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5M above the starting point completed all as specified and directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm

Supply and fix exhaust fan, steel body AC single Phase, 230 V of size 300mm sweep with blades and frames and louvers

M&L for making holes in bathroom for fixing exhaust fan complete all as specified and as directed by Engineer-in-Charge

Taking down ceiling fan of any make & sweeep from existing position of any height complete as as specified and as directed

Hanging only ceiling fan 120mm / 1400mm sweep complete all as specied and as directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

M&L for repair of Ceiling Fan of any capacity and any size including removing of old burnt winding any type and rewinding of stator winding of any type/any make fan with superior quality winding copper wire with superior rquality insulation in presence of JHE in charge inclduign repalcement of old unsv beairng of specified size, old unsv gun metal bush, old unsv cpaocitor of size 2.5/3.15 mfd and old unsv rubber reel/bush for hanging bracket and also applying one coat of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc complete all as specified and directed.

M&L for replacement of old unsv rusted panel including fabrication of front opening and outdoor type incorporated with busbar chamber ground mounted having aluminium busbar capacity 100 amps insulated with RYB& black PVC insulattion suitable for 415 volts 3 phase 4 wire system 50 c/s fixed on SMC/DMC in step way complete with dust and vermin proof provisions made of CRCA MS sheet not less than 3.00 mm thick also having provision for incoming/outgoing MCCB,s/ cables, 02 Nos earth terminal point complete with 10mm bolt, 02 nos nut and 02 Nos Washers3mm thick complete earth . The panel body must be painted with powder coated paint after the complete 7 tanks dip process of to remove all impurties from the panel sheet, all the door must be fixed with detach able pin type hinges,steel door locking system, all the electrical connection inside the panel from bus bar to MCCB,s shall be through aluminium strip properly insulated fixed on SMC/DMC insulators. having arrangement for fixing the same on ground with MCCB 63 Amp 25 KA rating 4 Pole 415 volts - 01 No (Incoming) all as specified and directede by Engr - in- charge. Panel body shall be fixed on iron angle frame of size 50x50x5mm 30 cm grouted in 1:2:4 type 1 PCC 20 mm graded and 30 cm above the ground level duly painted with two coat of synthetic enammelled black paint over a coat of red oxide primer all as specified and directede. Note : The platform shall be 450 mm height above ground level

R K Builders

M/s. Jaswant Singh Govt Contractor

Amrik Construction co

HARI OM ENTERPRISES

D S INFRASTRUCTURE AND DEVELOPERS