REPAIR/MAINT TO FLOORING, BRICK WORK, WATER SUPPLY, ROOF TREATMENT AND OTHER B/R WORKS OF MES INSTALLATIONS OF GE PANAGARH

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level, complete all as specified and directed.

Surface dressing n.exc.15 cm deep and site clearance complete as specified in soft /loose soils complete all as specified and directed.

M&L for moorum filling/red bajri filling in floor or paving laid in laying n exc 15 cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L for hardcore broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for providing 100 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in sub base of flooring ,complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for providing 40mm thick PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth without using extra cement , complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) for copings kneelers bed plate including watering complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving, complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S & F glass dividing strips, 3mm thick and 38mm wide and inserted in position to confirm to design complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) of any thickness including ridges, hips, valleys as in roof coverings complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings ,complete all as specified and directed.

S&F plain galvanized mild steel sheeting 0.63 mm thick in ridges with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roofs complete all as specified and directed.

All as per item No 15.00 here-in-above but except sheeting (any thickness) commplete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.

S&F Pre - Painted galvanized aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws complete all as specified and directed.

Dismantling of timber scantlings 40 sq.cm and over in section, in any position complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided , complete all as specified and directed.

S&F rolled mild steel structural steel work as in roof trusses ( framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc .including necessary welding, riveting, bolting , conforming to Fe-410 (Gde E-250) Quality -A, complete all as specified and directed.

S&F wind ties for roof including securing bolts, flat iron fillets (for securing weather boarding with screw bolts and nuts) including all necessary drilling,bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 including painted with one soap coat of zinc chromate primer paint. (including preparation of surface at contractor's workshop before fabrication), complete all as specified and directed.

Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and directed.

S&F 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified and as directed.

M&L for hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof truss by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long including dismantling ,complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM 1:6 etc complete all as specified and directed.

M&L for brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6 ) etc all complete all as specified and directed.

M&L for fly ash bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick plaster in cement mortar(1:4) on fair faces of concrete or brick work in two layers (10mm thick 1st layer + 5mm thick finishing layer) mixed with water proofing compound as per manufacturer’s instructions on top layer finish even & smooth without using extra cement, complete all as specified and directed. Note: WPC will be measured and paid separately under relevant item here-in-after.

Supply only liquid water proofing compound.

M&L for preparation of old plastered surface of wall applying two coats of oil bound distemper on walls complete all as specified and as directed.

M & L for washing rubbing down and stopping old treated plastered surface of walls including scraping where ever required and applying two coat of oil bound distemper , complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for prepration old surfaces of wall by brooming down or steel wire brushing scrapping down smoke spot, moulds moss, efflorescent salts, trading oils & greasy spots and applying two coat of white wash on walls including cornices, pilasters etc complete all as specifed and directed.

M&L for preparation of old surfaces on ceiling and applying two coats of white wash , complete all as specified and dircted.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type.complete all as specified and dircted.

S&F safety lever locks mild steel with 4 levers for rolling shutters ,complete all as specified and dircted.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specifiedd and directed .

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and botttom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 2nd class Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu.cm each complete all as specified and directed.

M&L for PCC 1:2:4 type B 0 using (12.50 mm graded stone aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. Note: Form work required for these items included in the unit rate of this item.

Supply and fixing mild steel flat iron of size 30 X 5 mm work as in hold fast and similar small articles including required cutting , bending and fixing complete, mild steel conforming to Fe-290 Gde-E-165 ,complete all as specified and directed.

S&F stainless steel butt hinges, medium weight, and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed.

S&F 125mm Cast iron or malleable cast iron handles, cast type, stove enamelled black ,complete all as specified and directed

S &F mild steel sliding door bolts 300mm long, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and two on staple plate and fixed, complete all as specified and directed.

Supply and fix 150 mm aluminium handle cast type, anodised, complete all as specified and directed

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply and Fix, Aluminium Alloy, anodised, sliding door bolt, length of bolt 300 mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.

M&L for 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane ,complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in Concrete, brick work etc, including taking out embedded portion and making good disturbed ground.complete all as specified and directed.

Excavating in post hole each not exc 0.5 cum getting out returning, filling and ramming earth or broken rubble mixed into earth around in layers n . exc 25 cm in soft/loose soil complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S&F mild steel flat iron fillets (for securing wire mash etc) to fencing post including all necessary drilling, bolting or riviting etc and similar work conforming to Fe-290 Gde E-165 ,complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.complete all as specified and directed. Note : Chain link fencing will be paid separately.

Supply only Chain link MS galvanisd fencing of any meshsize or type.complete all as specified and directed. Note : (i) Fixing of chain link fence will e measured and paid separately. (ii) Note: Weight of chain link fencing shall be asertain through Board of Officers.

M&L for round bar 10mm dia and over cut to length bent to shape for fixing fence with post.complete all as specified and directed.

S&F mild steel screw bolts (machine made 11 mm to 15mm dia of shank)) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fittedwith washers and one hexagonal or square nut, 5cm but not exc 10 cm long.complete all as specified and directed.

Demolition of RCC(other than ground floor) pillar, beams landing, chajjas, slab shelves & similar suspended work (reinforcement cut as required to facilitate demolition) and removing unseviceable material complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B1,1:2:4 (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete,complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B1 ,1:2:4 (20mm graded stone aggregate) in Columns, pillars, piers, posts and struts. complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete (Nominal Mix) type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in chajjas and similar work complete all as specified and directed.

M&L for Reinforced Cement Concrete (Nominal Mix) type B1, 1:2:4 (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like.complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finihed surfaces complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces, complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams for rough finished surfaces etc. complete all as specified and directed.

Use and waste of form work to chajja and similar work including edges ffor rough finished surfaces.complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horatl or sloping) complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips, complete all as specified and directed

Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia, complete all as specified and directed.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Errection only framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in floor for levelling course, complete all as specified and directed

M&L for 1st quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but n. exc 0.11 sqm of approved colour as in floors etc set and joined in neat cement slurry over 15mm thick sreed bed of cement mortar (1:4),complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for 1st quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.11 sqm but n. exc 0.18 sqm of approved colour as in floors etc set and joined in neat cement slurry and pointed in white of coloured cement over 15mm thick sreed bed of cement mortar (1:6) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

M&L for 1st quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.11 sqm but n. exc 0.18 sqm of approved colour as in skirting and set and joined in neat cement slurry and pointed in white of coloured cement to match over 10 mm thick rendering complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for (300x 300) mm x 25mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving tc including the setting and jointing in neat cement paste and slurry 0.3 kg/Sqm over 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. Note: Design, shade and pattern of fixing of chequered tiles shall be as directed and approved by GE

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20 mm thick screed bed or bedding layer in mortar (1:6) , complete all as specified and directed. Note: Design, shade and pattern of fixing of kota stone slab shall be as directed and approved by GE.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confoirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. Note: Design, shade and pattern of fixing of paver block shall be as directed and approved by GE.

S&F in repairs water closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor complete all as specified and directed.

S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

Supply and fix in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long scrwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe and brackets complete all as specified and directed

S&F in repair PVC connection 15 mm size PTMT nuts of length ength 600 mm complete all as specified and directed

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair stop valve of 15mm bore , chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S&F in repair grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in steel tubing and connection 15 mm dia bore complete all as specified and directed.

Taking down eaves gutters and rainwater pipes(any size or pattern) including all fittings,heads,shoes bends etc complete all as specified and directed.

S&F PVC (SWR) rain water 110 mm pipe single socket in any length with rubber ring joint ,fixed to walls with PVC clamp ,complete all as specified and directed.

All as per item No 109.00 mentioned here-in-before but 75 mm bore complete all as speified and directed

S&F 110mm bore PVC (SWR) bends any radius with access door , complete all as speified and directed.

S&F in repair 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR), junction double, (double T), equal or unequal with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with access door with rubber ring joints fixed to wall and jointed complete all as specified and as directed .

S&F in repair 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR), junction double, (double T), equal or unequal with access door complete all as specified and directed.

S&F 110mm bore PVC(SWR) vent Cowl, complete all as specified and directd.

S&F 75mm bore PVC(SWR) vent Cowl, complete all as specified and directd.

S&F wire netting of galvanised steel wire 0.71mm dia and size of mesh is 12 mm fixed properly with suitable nails for repair of cracks at various locatios in wall , beam, chajja, facia, slab, lintel etc including taking down plaster of cracked portion nd cutting grooves for receiving wire mesh and making good the area by rendering cement mortar (1:3) and finally to match the surface with adjacent surfaces by applying white wash/OBD or cement base paint as applicable complete all as specified and directed .

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (Using 12.5 mm graded stone aggregate) as in padding on roof, finished fair and even without using extra cement.complete all as specified and directed.

M & L for rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:4) without using extra cement including water proofing compound, complete all as directed. Note: WPC will be measured and paid separately under relevant item.

M&L for preparation of new surfaces of roof and applying two coats of Polyurethane(PU) accrylic based waaterr proofing liquied compound over and including one coat of self priming primer @ one litre per 10 sqm with reiforcing fabricc sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge. Note : As per description of this item, minimum two cots of Polyurethane (PU) acrylic based wate proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instrucions more coats of Polyerethane (PU) acrylic based waterr proofing liquid compound and primer are required for roof treatment. (ii) Quoted rate shall be included for work in building/struture of any height. (iii) To be applied by uthorised applicator.

UNITED BUILDERS