REPAIRS TO JOINERY, FLOORING, INTERNAL WATER SUPPLY, PLUMBING ETC AT 515 ABW, MARSHAL BK, NCC, CWE (ARMY) UNDER GE (SOUTH) BANGALORE.

Amount

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm

Taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 Sqm complete all as specified and as directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165.

S&F steel windows with side hung shutters incl projecting type hinges with steel handle and steel ped stay, complete with glazing bars dovetailed or welded.

All as per item No 05 above, but without glazing bars

S&F Steel windows or ventilators, fixed type, with glazing bars all as specified and as directed.

M&L for powder coated aluminium sliding window shutter sections weighing not less than 0.37 including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, stainless steel screws, anodised aluminium fittings such as locking arrangements, rollers etc complete all as specified and directed. Note - Each shutter area will be measured seperately

S&F aluminium anodised frame for doors, windows vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating complete all as specified and directed.

S&F powder coated, min thickness (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Supplying and fixing of 6mm ACP sheet fixing (Cross bond, uro bond or equivalent) in shutter panesl including all necessary accessories and other necessary hardwares.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Size / section of each member should be as per SSR part-II. (a) Area not exc 2.00 Sqm each opening. (Note: The unit rate quoted by contractor excludes cost of glass and wiremesh and includes all other connected accessories. Net Opening will be measured for payment purpose.)

All as per item No 12 above but exc 2.00 Sqm each opening

S&F sheet glass 4.8mm thick ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed.

All as per item No 14 above but 4.8mm thick sheet glass exc 0.5 sq. m each pane complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality, in squares n exc 0.5 sq. m each pane

S&F galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples to existing steel/wooden windows, doors etc all as specified and as directed .

M&L for second class soft wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads of cross section not exc 3.0 Sq cm

S&F in sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading incl Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips all as specified.

S&F 3 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane incl Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips all as specified.

S&F solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixed in opening as per specification and drawings.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side colour PVC shet to be fitted in the M.S frame selded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixed to frame, all as per specification & drawing.

S&F stainless steel 75 mm butt hinges for doors complete all as specified.

S&F 100 mm long aluminium anodised barrel tower bolts and extruded section complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

M&L for 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.

M&L for 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.

S&F 30mm thick flush shutters, solid core construction, with block board core both faces covered with decorative face veneer with lipping/frame to match all as specified and as directed

S&F 30 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified and as directed.

S&F stainlees steel 150mm door handles with stainless steel screws all as specified and as directed.

S&F stainlees steel 150mm tower bolt with stainless steel screws all as specified and as directed.

S&F stainlees steel 250mm sliding door bolt with stainless steel screws all as specified and as directed.

S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

S&F in repairs alumiium cast type Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg

S&F in repairs alumiium cast type Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg

S&F floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hold fasts; wall ties; and similar small articles conforming to Fe-290 Gde-E-165

S&F in repairs Stainless steel curtain rod heavy duty 25mm dia with and including a pair of chromium plated bracket all as specified .

S&F stainless steel end knobs, polished, suitable for 25mm dia rods, medium weight all as specified

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide.

M&L for fabrication cabinets, cupboards etc of openable shutters, shelves partitins, drawers etc made up of 22mm solid core BWR ply choice lamination on the both faces, each shutter having a pair of self closing hinges or continous hinges as approved, stainless steel fancy handles, tower bolt and other fittings as directed, taking down old cabinets, S&F wood frame etc complete all as specified and as directed. Note - 1. Surface area of each member is measured flat for payment. 2. S&F of all necessary hardware deemed to be inclusive in quoted rates.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor)

M&L 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate), as in sub base of floors.

S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed in cement mortar 1:6 all as specified and as directed

S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick plaster in cement mortar 1:4 all as specified and as directed

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.

S&F coloured Glazed ceramic tile in verticle surface 300x450x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CP 1:4

Supply and laying of 20 mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in tfloors Iincluding taking down old tubes 20mm dia, complete all as splecified.

-All as per item No 51 above but 25mm dia including taking down 25mm dia pipe all as specified and as directed.

S&F in CPVC brass treaded elbow 20 mm fixed with all as specified.

S&F CPVC brass treaded Tee 20 mm all as specified.

S & F in repair vitreous china washdown water closet pan & trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan incl all joints incl connection to drain pipe and flush pipe.

S&F in repairs EWC with integral flushing cistern of vitrous china (one piece) white or coloured including fixing bolts and flush pipe, seat cover, hinging device, 'P' or 'S' trap WC connector etc, complete all as specified and directed .

S&F viterous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Squatting pan orrisa pattern including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete.

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling 32mm dia etc.

S & F PVC connection 15 mm dia with PTMT nuts of lenth 450 mm.

S&F in repair 32 mm dia PVC waste pipe for WHB complete all as specified.

S&F in reapir 15 mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed all as specified and as directed.

S&F in repairs angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed ends for iron/CPVC pipes or for unions complete all as specified and directed.

S&F in repair 15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed.

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified

S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges

S&F shelf of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Min wt 300 gms)

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repairs chromium plated grating 100/75 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F 500 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of tanks all as specified.

All as per item No 74 above but 1000 ltr capacity

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Min wt 210 gms)

S&F CPVC tank adaptor 20mm dia.

S&F in repairs Glass corner shelf including CP railing, radius 250 mm complete all as specified and directed.

M&L in repairs 15mm dia CP swan neck long body fancy type sink tap complete all as specified.

Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs

Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs

M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar incl removal of debries out side MD land.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 405mm x 355mm x 178mm (minimum), including PVC waste pipe 40 mm dia complete all as specified and directed.

S&F assembled ready to use stainless steel grade 304, kitchen plate rack inlcuding top/middle shelves of 1.0mm thick sheet, square hollow supports, including bottom hooks, spoon holes, front and back open, size 915x915mm as approved and specified.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F PVC (SWR) bends 75mm any radius

S&F PVC (SWR) bends 110mm any radius

Cleaning of scales, dirt from 500 ltr capacity PVC tanks, pipe mouth etc over roof of accessible/non accessible roof, including taking down and refixing if required, writing date of cleaning with stensil or other suitable method in Itallic or arial fonts 150mm height all as specified and as directed.

All as per item No 90 above but 1000 ltr capacity tanks.

S&F in repairs HDPE PVC lid (cover) for 500/1000 ltr capacity PVC water tank all as directed.

Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 incl finished even and smooth (without using extra cement).

M&L preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion white or tint over primer with 1mm wall putty on plastered surface complete all as specified.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion white or tinted over primer with 1mm wall putty on plastered surface complete all as specified.

Preparation of old decorated surfaces of walls and applying one coat of distemper oil emulsion all as specified and as directed.

Preparation of old decorated surfaces of ceiling and applying one coat of distemper oil emulsion all as specified and as directed.

M&L Complete removal of existing treatment of old surfaces of walls and applying two coat of distemper oil emulsion incl 1mm thick wall putty with alkali resistant priming paint on plastered surface complete all as specified.

MAYANK ENTERPRISES (BID ID -3353864)

Srisrinivasaenterprises (BID ID -3354790)

PRAGATHI BUILDERS (BID ID -3357030)