Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹70.1 L
EMD Value
₹1.4 L
Closing Date
27 Feb 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PROJECT DIRECTOR
Office of the Project Director, FRFCF-NRB, Kalpakkam.
Maintenance of Power and Lighting system at FRFCF, Kalpakkam
2024_BARC_795639_1
BARC/NRB/FRFCF/ELE/ETR043/2024
Open Tender
Electrical Works
Item Rate
366 days
FRFCF, KALPAKKAM
Please refer tender document
8 documents required · 8 mandatory
₹0
₹1.4 L
22 Mar 2024
16 Feb 2024
4 Mar 2024
16 Feb 2024
27 Feb 2024
16 Feb 2024
16 Feb 2024 - 23 Feb 2024
Amount
Identification and rectification of faults without changing accessories in Flourescent light/LED/CFL fixtures/ incandescent lamps in labs and low bay areas as per the tender specification.
Identification and rectification of faults without changing accessories Flourescent fittings/LED/ SV/MV/MH fittings in high bay areas as per the tender specification.
Identification of fault and Replacement of 5A to 16A switches, telephone jacks, TV coaxial socket, 20A Modular motor starters, Modular plates of different sizes, plug tops in Flush/Concealed type MS switch boxes in labs and low bay areas as per the tender specification.
Identification of fault and Replacement of 6/16/20/32 Amp, 250 volt, 50 Hz single pole /Double pole MCB in labs and low bay areas as per the tender specification.
Identification of fault and Replacement of 415 volt, 50 Hz four/three pole MCB up to 63 Amps in labs and low bay areas as per the tender specification.
Wiring for lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of 1.5 Sq.mm wires , termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the tender specification.
Wiring for lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including , Supply of 2.5 Sq.mm wire , termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the tender specification.
Supply and Installation of Surface Mounting Plastic Boxes 1/2 Module as per the tender specification.
Supply and Installation of Surface Mounting Plastic Boxes 3 Module as per the tender specification.
Supply and Installation of Surface Mounting Plastic Boxes 6 Module as per the tender specification.
Supply and Installation of Surface Mounting Plastic Boxes 12 Module as per the tender specification.
Supply and fixing One/Two module front cover plate on existing modular metal/plastic boxes etc. as required as per the tender specification.
Supply and fixing 3 Modular front cover plate on existing modular metal/plastic boxes etc. as required as per the tender specification.
Supply and fixing 6 Module front cover plate on existing modular metal/plastic boxes etc. as required as per the tender specification.
Supply and fixing 12 Module front cover plate on existing modular metal/plastic boxes etc. as required as per the tender specification.
Supply and fixing 1 Modular dummy plate front cover plate on existing modular metal/plastic boxes etc. as required as per the tender specification.
Supply and Installation of 1 No. 10A Switch on modular plate and termination of wires to the switches as per the tender specification.
Supply and Installation of 1 No.16A Switch on modular plate and termination of wires to the switches as per the tender specification.
Supply and Installation of 1 No 6A 3 Pin shuttered type Socket on modular plate and termination of wires to the switches as per the tender specification.
Supply and Installation of 1 No 6/16A 3 Pin combined shuttered type Socket on modular plate and termination of wires to the switches as per the tender specification.
Supply Installation testing and commissioning of 6-32 Amps SP MCB (Type-C) on Distribution Boards as per the tender specification.
Supply Installation testing and commissioning of 40-63Amps, FP MCB (TYPE-C) on Distribution Boards as per the tender specification.
Supply fixing testing and commissioning of the DP 63A 30mA, TYPE AC RCCBs on Distribution Boards as per the tender specification.
Supply and Installation of 25 X 12 mm size of PVC Mini trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the tender specification.
Supply, testing and commissioning of 400mm MAXX AIR Pedestal Fan or equivalent as per the tender specification.
Overhauling, Painting and test running of 0.5 HP and upto 2.0 HP LT Motor single/three phase motors as per the tender specification.
Supply and replacement of 6203 2Z or equivalent Motor Bearings during overhauling as per the tender specification.
Supply and replacement of 6306 Z or equivalent Motor Bearings during overhauling as per the tender specification.
Rewinding of above 0.5 HP and upto 2.0 HP LT Motor as per the tender specification.
Supply and replacement 12" blade for Exhaust fans as per the tender specification.
Supply, installation, testing and commissioning of 300 mm Dia Turbo Heavy Duty Wall Mounting Exhaust Fans including supply of Aluminium grill bracket with Stainless Steel Bolts for mounting of Exhaust Fan & Aluminium grill bracket and 3 Core, 1.5 Sq.mm (14/0.3) PVC insulated & FRLS sheathed copper flexible cable of required length as per the tender specification.
Replacement of fluorescent lamps with LED Lamps including supply of 4 feet, 25mm dia, 230V AC, 50Hz LED TYPE tube light with builtin ballast or Equivalent and required rewiring inside the luminaires as per the tender specification.
Supply, transportation, installation, testing and Commissioning of the 230V AC, 50Hz Recess mounted luminaires (Down lighter) Lamp Type LED and required rewiring inside the luminaires as per the tender specification.
Supply, Installation, Testing and Commissioning of LED 230V AC, IP 66 Flood light luminaries, Lamp Type LED on RCC/Metalic poles of height from 7 M to 12 M as per the tender specification.
Supply, Installation, Testing and Commissioning of 230V AC, IP55 LED based street light luminaries Lamp Type LED on RCC/Metalic poles of height from 7 M to 12 M as per the tender specification.
Removal of RCC Straight / Single / Double Arm / "Y" Poles/Spun pole (9 Mtr to 14.5 Mtr height)/PTL from a location, transportation and re-installation of removed street light poles with lighting fixtures, junction boxes etc as per the tender specification.
Supply & Installation of 9 meters high Hot dipped G.I street light pole including painting with PU paint, foundation EP, heavy duty GI cable entry pipe in 1:3:6 PCC foundation, excavation and refilling etc as per the tender specification.
Servicing High mast gear box, oil top up, greasing of ropes, chain, painting, cleaning etc as directed by EIC. Motor to be removed and handed over for over hauling at motor section and refixing after over hauling as per the tender specification.
Replacement of faulty and including supply of Lamp Holders (Suitable for LED tubes/CFL/MH lamps), Tube Light holder bracket Single/Twin or Tube light starter holder as per the tender specification.
Supply and Installation of Cast aluminium Junction box for PTL and street light pole as per the tender specification.
Maintenance and Servicing of canteen equipment's such as Rice boiler, vanali, chapatti buffer, water heater etc. including contacts etc. as per the tender specification.
Maintenance of Earth Pits including supply of Sodium Bentonite, and measurement of Earth Pit Resistance as per the specification.
Supply and replacing following earth pit chamber parts such as RCC top cover alone after removing and disposing off old/damaged part as per the tender specification.
Supply and replacing following earth pit chamber parts such as RCC ring with cover alone after removing and disposing off old/damaged part as per the tender specification.
Maintenance of Motor Control centres / Distribution Centres, LT panels having number of vertical sections up to 3 as per the tender specification.
Maintenance of Motor Control centres / Distribution Centres, LT panels having number of vertical more than 3 as per the tender specification.
Maintenance of TPN switch fuse units upto 200Amps as per the tender specification.
Maintenance of Feeder pillar (Type-A) as per the tender specification.
Maintenance of Feeder pillar (Type-B) as per the tender specification.
Maintenance of Feeder pillar (Type-C) as per the tender specification.
Painting of 415V Cubicle Switchboards having number of vertical sections upto 3 with Two coats of synthetic enamel Paint including supply of paints and required consumables as per the tender specification.
Painting of 415V Cubicle Switchboards having number of vertical sections more than 3 and upto 6 with Two coats of synthetic enamel Paint including supply of paints and required consumables as per the tender specification.
Painting of 415V Cubicle Switchboards having number of vertical sections above 6 with Two coats of synthetic enamel Paint including supply of paints and required consumables as per the tender specification.
Maintenance of 8/12 Way 16/32/63 Amps MCB Power and Lighting Distribution Boards as per the tender specification.
Disconnection of service connection with Energy meter board & shifting the board including connected cable as per the tender specification.
Installation of Energy meter board & providing service connection at Various locations as per the tender specification.
Annual Curative discharge and charge on flooded type Battery Banks of voltage upto 110V. (Including hourly recording of Specific gravity, cell voltage and temperature.) as per the tender specification.
Supply, fabrication and installation of the 50 X 6 mm GI flat of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation as per the tender specification.
Supply, fabrication and installation of the 25 X 6 mm GI flat of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation as per the tender specification.
Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of 3/3.5/4 Core X upto 25 Sqmm direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department) as per the tender specification.
Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of 3/3.5/4 Core X above 25 to 3/3.5/4 Core X up to 120 sqmm direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department) as per the tender specification.
Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of 3/3.5/4CX Above 120 Sq.mm but not exceeding 3.5/4CX 240 sq.mm direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department) as per the tender specification.
Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of 3/3.5/4 Core X Above 240 sqmm to 3/3.5/4Core X 400 sqmm direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department) as per the tender specification.
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of 3/3.5/4core X Upto 25 sqmm in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department) as per the tender specification.
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of 3/3.5/4Core X above 25 & up to 120 sqmm in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department) as per the tender specification.
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of 3/3.5/4Core X above 120 & up to 240 sqmm in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department) as per the tender specification.
Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of 3/3.5/4Core X above 240 & up to 400 sqmm in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department) as per the tender specification.
End Termination of the 4C x 2.5 Sq.mm (including cable gland earthing) Copper Conductor PVC/XLPE Insulated and FRLS sheathed armoured UG Cable using Single Compression, Heavy Duty, Siemens type Brass Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Copper crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland as per the tender specification.
End Termination of the 4C x 16 Sq.mm (including cable gland earthing) Copper Conductor PVC/XLPE Insulated and FRLS sheathed armoured UG Cable using Single Compression, Heavy Duty, Siemens type Brass Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Copper crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland as per the tender specification.
End Termination of the 3.5/4 C x 35 sq.mm of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland as per the tender specification.
End Termination of the 3.5/4C x 50/70 sq.mm of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland as per the tender specification.
End Termination of the 3.5 x 120 sq.mm of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland as per the tender specification.
End Termination of the 3.5 x 185 sq.mm of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland as per the tender specification.
End Termination of the 3.5 x 240 sq.mm of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland as per the tender specification.
End Termination of the 3.5 x 400 sq.mm of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable glandas per the tender specification.
Temporary laying of LT cables of 3.5C X 70 Sq.mm Aluminium conductor in open air / in Built in trench as per the tender specification.
Shifting of Heavy Electrical equipment (more than 500 kg and upto 5 Tons) within a distance of 5 kM including loading and unloading as per the tender specification.
Supply, installation, testing and commissioning of the 3.5 (or) 4 Core, 25- 50 Sq. mm Heat Shrinkable Cable Straight Through Jointing Kits (Crimping type) for 3.5 (or) 4Core Aluminium Conductor, 1.1 kV (E), PVC/XLPE insulated cables of as specified. Excavation will be measured separately as per the tender specification.
Supply, installation, testing and commissioning of the 3.5 (or) 4 Core, 70- 95 Sq. mm Heat Shrinkable Cable Straight Through Jointing Kits (Crimping type) for 3.5 (or) 4Core Aluminium Conductor, 1.1 kV (E), PVC/XLPE insulated cables of as specified. Excavation will be measured separately as per the tender specification.
Supply, installation, testing and commissioning of the 3.5 Core, 120- 185 Sq. mm Heat Shrinkable Cable Straight Through Jointing Kits (Crimping type) for 3.5 (or) 4Core Aluminium Conductor, 1.1 kV (E), PVC/XLPE insulated cables of as specified. Excavation will be measured separately as per the tender specification.
Supply, installation, testing and commissioning of the 3.5 Core, 240 Sq. mm Heat Shrinkable Cable Straight Through Jointing Kits (Crimping type) for 3.5 (or) 4Core Aluminium Conductor, 1.1 kV (E), PVC/XLPE insulated cables of as specified. Excavation will be measured separately as per the tender specification.
Supply, installation, testing and commissioning of the 3.5 Core, 400 Sq. mm Heat Shrinkable Cable Straight Through Jointing Kits (Crimping type) for 3.5 (or) 4Core Aluminium Conductor, 1.1 kV (E), PVC/XLPE insulated cables of as specified. Excavation will be measured separately as per the tender specification.
Excavation of soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification as per the tender specification.
Removal of termination of armoured cables of Sizes upto 4C X 25 sq.mm from electrical equipment or reconnecting of removed termination as per the tender specification.
Removal of termination of armoured cables of Sizes above 4C X 25 sq.mm and upto 4C X 70 sq.mm from electrical equipment or reconnecting of removed termination as per the tender specification.
Supply and Installation water proof stickers of 250 x 50 mm size with messages as directed by Engineer in charge as per the tender specification.
Supply and Installation of 3.0 mm thick white finish Hylam sheet covers for MS switch Boxes/ JBs of Sizes up to 400 x 400 mm as per the tender specification.
Numbering of electrical equipments in within 200mm dia/225 X 100mm area with synthetic enamel paint of different background colours, letter colour & size of letter as per the tender specification.
Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising / MS fabrication 1 coat primer & 2 coats synthetic enamel paint including supply of required, fasteners, nuts, washers, etc.as per the tender specification.
Supply and installation of Indication LED Cluster Type lamp, 110V &240V AC Colour: White &Blue (22.5mm dia)
Supply and installation of Indication LED Cluster Type lamp,110V& 240V AC Colour: other then White &Blue (22.5mm dia)
DHEVADHARSHINI ENTERPRISES
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .