Comprehensive maintenance to SE, KM and DKS colony of AGE BR-I under GE (N) Bikaner at Bikaner Mil Stn

Amount

Taking down chowkhats or frames not exc. 1.50 sqm each but with shutter (w/o taking of shutter from the frame ) including Windows /ventilators complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

Taking down door shutter of any desc not exc 2 sqm and removing to store complete all as specified and as directed.

Taking down chowkhats or frames exc. 1.50 sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and as directed. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

Demolition of brick/stone masonry built in CM all as specified and M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and Supply and laying of CPVC pipes (outer dia 20 mm) SDR 11 pipes & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and as directed.

Taking up or down steel tubing 25 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and Supply and laying of CPVC pipes (outer dia 25 mm) SDR 11 pipes & plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and as directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor or roof and finished even and fair including demolition of old cement concrete complete all as specified and as directed.

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed.

M&L for Rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down old plaster complete all as specified and as directed.

M&L for vitrified ceramic coloured tiles Dark shade/Double charged/Ultra charged 10 mm thick (Square/ rectangular ) polished ,area of each tile exc 0.42 sqm but n.exc. 1.00 sqm in floors etc.set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 20 mm thick screed plaster in CM 1:4 including dismantling of old tiles complete all as specified and as directed.

M&L for vitrified ceramic coloured tiles Dark shade/Double charged/Ultra charged 10 mm thick (Square/ rectangular ) polished ,area of each tile exc 0.42 sqm but n.exc. 1.00 sqm in skirting,dado etc.set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 10 mm thick plaster in CM 1:4 including dismantling of old tiles complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors and skirting ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 15 mm thick screed plaster in CM 1:4 including dismantling of old tiles complete all as specified and as directed.

M&L for Glazed ceremic coloured tiles in vertical surfaces 300x450x7/8 mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) including dismantling of old tiles complete all as specified and as directed.

M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in platform or as in vertical surface over 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair including dismantling if required and rounding/moulding to egdes complete all as specified and as directed.

S&F Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window or Two track two panels sliding window with fly proof S.S wire mesh /Glazed , made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners of suitable size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed /openable glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 1.50 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners of suitable size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F for factory made single extruded WPC ( Wood polymer composite) solid door /window/ceosetory windows& other Frames/Chowkhat of size 65x100 mm compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N ( Edge),minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and as directed. ( MS holdfast / lugs dash fastners shall be included in unit rate of item). Note:- For WPC solid door/window frames,minus 5 mm toletance in dimension i.e. depth and width of profile shall be acceptable .Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per item No 18 here-in-before but frame size 65x125 mm

S&F for factory made single extruded WPC ( Wood polymer composite) solid decorative type flush door shutter of size 35 mm thick compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N ( Edge),minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws ,complete as per direction of Eng In charge . Note:- SS butt hinges and SS screws shall be included in unit rate of item.

All as per item No 20 here-in-before but skelton door shutters of 35 mm thick complete all as specified and as directed.

S&F Flush Shutters 30 mm thick , solid core construction, with block board core and plywood face panel , commercial type on both side complete. Including edges of door covered with teak bid and makng provision for fixing mortice lock and hinges complete all as specified and as directed.

S & F hard wood glazed and skeleton shutters 30 mm open rebated and prepared to receive glass, gauze etc, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I section 8, clause 8.20 (a) supplied and fixed to chowkats complete all as specified and as directed.

Supply and fixing of 100 mm SS Butt hinges, complete all as specified and as directed.

S&F for 150 mm stainless steel handles / SS tower bolts complete all as specified and as directed.

S&F SS sliding door bolt, length 250 mm including a minimum of 6 bolts, nuts and washers complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover plate 150 mm complete all as specified and as directed.

S&F 150 mm Long ordinary rat tail rod pattern spring of mild steel including roller and roller plate fixed to welding or screw with chowkhats or frames as in repairs complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or desc.)from wooden frames or stone conc. or brick surrounds glazed with putty or fixed with beads alnd S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair 20 mm dia mild steel curtain rod chromium plated incl brackets, stops etc. complete all as specified and as directed.

S&F 18/19 mm thick single side Pre laminated PVC Boards suitablely fixed in kitchen cabinets/Cupboards,frames, partitions and shelves of built in cup boards,almirahs and similar work etc of any finish including suitable magnatic catcher, Piano hinges, SS hasp and stapple ,SS handles etc. complete all as specified and as directed.

S&F Powder coated aluminum frames/shutter ,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified and as directed.

S & F in repair aluminium glazing clip or rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and as directed.

S&F sheet glass 4.8 mm thick ordinary quality & glazing with rubber gasket in squares n exc 0.5sqm in each pane as in aluminium door/window complete all as specified and as directed.

S&F for 150mm size aluminium anodised barrel tower bolt of extruded section/ handle of fabricated type complete all as specified and as directed.

M&L for Sand stone slab 25-35mm thick as in chajjas, sunshade , man holes covers ,plateform etc. n exc 2 m in length punched dressed on face and along exposed edges,self faced on other side and set in cement mortar 1:4 incl.making chases in wall including dismantling old stone slab complete all as specified and as directed.

S&F in repair rotational mouleded polythene water storge tank any colour triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified of 500 ltr capacity include dismandling old water tank and deposited in MES store yard complete all as specified and as directed.

S&F in repair 20 mm dia of ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, (minimum weight 20mm-210 gms) complete all as specified and as directed.

M&L for cleaning and removing all scale and dirt etc from 500 ltr capacity tanks anf from mouths of circulating pipes etc complete all as specified and as directed.

S&F in repairs,stop /gate valve with butterfly handle ,screwed both ends for iron pipe of dia 20 mm complete all as specified and as directed.

S&F in repairs wall hung water closet ( size 510x365x380 mm) of superior quality including all fitting fixtures concealed cistern complete all as specified and as directed.

S&F in repairs vitreous China pedestal pattern white,(excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed.

S&F in repairs PVC flushing cistern 10 ltrs capacity incl flushing pipe and connections complete. as approved by Engineer in charge,low level, white with inlet, ball valve , complete all as specified and as directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including brackets & waste pipe etc complete all as specified and as directed.

S&F in repair 15 mm bore Brass CP Wall (Telephonic/Non telephonic )/WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair chromium plated Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and as directed.

S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm complete all as specified and as directed.

S&F in repair fancy type chromium plated stop valve/Angle valve ( one way or two way as directed ) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm complete all as specified and as directed.

S&F in repair 15 mm bore brass fancy concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe complete all as specified and as directed.

S&F in repairs health faucet (ABS body) mild steel CP suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F Towel Ring/Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F Corner glass shelf of size 300mmx200x150mm fancy type, toughned glass, with CP bracket and guard railing, fixed along wall with CP brass screws and PVC plug complete all as specified and as directed.

S&F in repair CP toilet paper holder fancy type complete all as specified and as directed.

S&F in repair CP shower roses with swivel joints with shower arm ,any size,including fixing to pipe or union complete all as specified and as directed.

S&F in repair 32 mm size CP waste coupling incl waste pipe (half or full threaded) complete all as specified and as directed.

S&F in repair SS soap dish complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460 mm bowl size 410 mm x 330 mm x 160mm including waste pipe ,connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed.

S&F stainless steel plate racks, glossy finish, for kitchen overall size 900mm x900mm complete fixed in position as recommended by manufacturer with SS screws/fasteners etc complete all as specified and as directed.

S&F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall or laid in trenches of 110/75 mm including suitable bends as required including dismantling old pipes complete all as specified and as directed.

S&F PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for Repair to minor carpenter items like fixing screws to tower bolt/ stoppers /Handle /Hinges in respect or Easening of Easening of (Steel/wooden /Aluminium) Door/Windows for any description and size by cleaning adjusting in position and making the same functional incl small repairs if reqd with and incl greasing , oiling , screws/nails for fixing the fittings complete all as specified and as directed.

M&L for Repair to minor plumbing items regarding water leakage from taps, flushing cisterns, wash hand basins, overhead tank over flow and other sanitary fittings/fixtures and any obstruction to water supply, requiring work and carryout minor repairs such as replacement of washers, check nuts, tightening the fittings of flushing cistern etc including small materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply lines functional and removing leakage fault complete all as specified and as directed.

M&L for Repair of rolling shutters of any type any height and any length making functional by providing greasing oiling , welding etc.including taking down rolling shutters or hood if required complete all as specified and as directed.

S&F self adesive membrance 1.5 mm thick self adhesive elastomeric SBS (styrene butadiene styrene) bitumen based membrance with high density with elastomeric finish on top , provided with pibial/ emufal TE bitumen primer @0.3 ltr per sqm, minimum over laps shall be 50 mm on sides and 100 mm on end laps. (Make Sika, Torcher or equivalent ) complete all as specified and as directed.

M&L for New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for Old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for New plastered surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc applying one coat of primer and applying two coats of acrylic distemper/OBD paint of approved tint over avg 1-2 mm thick wall care putty over new plastered surfaces of wall/ceiling etccomplete all as specified and as directed.

M&L for Old decorated surfaces by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two coat of acrylic distemper/OBD of approved tint over avg 1-2 mm thick wall care putty on walls /ceiling complete all as specified and as directed.

M&L for Old surfaces plastered or unplastered by mechanical sander brooming down or steel wire brushing scraping down oil & greasy spots etc and applying two coat of white wash on old decorated surfaces of wall/ceiling include cornices complete all as specified and as directed.

M&L for New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.

M&L for Old painted wooden surfaces of any description not otherwise described over 10 cm width & girth & applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling Brick tiles or terracing tiles,single layer on roofs complete all as specified and as directed.

Removal of existing PCC/Brick Bat Coba/Mud phuska/APP Membrane from the roof stacking the reusable material and disposal of unserviceable rubbish outside the campus as direction by Engg In Charge but outside in 3 km complete all as specified and as directed.

M&L for 15 mm thick rendering in CM (1:4) over existing /Old RCC slab/surfaces after dismantling /demolition/taking down existing roof treatment complete all as specified and as directed.

Cleaning of surface of loose dust and grit and cement slurry etc. by means of wire brush dust removing and scrapper etc .Pot holes/cracks shall be repaired with cement admixed with polymer as per manufacturer instructions complete all as specified and as directed.

M&L for providing PCC coving /gola along vertical parapets of size 75 mm x 75 mm with concrete mix (1:2:4) type B0 using WPC of approved make etc complete all as specified and as directed.

M&L for treatement with PU Elastoseal primer with Epoxy primer to seal the pores and enhance the adhesion of the coating,supplying and applying single component waterproofing liquid membrane based on pure, elastomeric, polyurethane resin cold applied of spray/brush applied membrane with an elongation of (650%+,- 50 ) and tensile strength not less than 2 Mpa ,crack bridging ability not less than 2 mm.No leakage upto 5 bars of water pressure.shore hardness > 50 shore. The Minimum thickness to be applied shall be 1.5 mm,( overall )in two layers (each layer 750 micron) or as per manufacurer's instructions so as acheive thickness not less tha 1.5 mm complete all as specified and as directed.

M&L for providing and laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75 mm before laying SRI Roof tiles complete all as specified and as directed.

M&L for Providing and laying SRI (Sun Resistance Index ) roof tiles (size 300x300x9-10 mm) with 20 mm thick cement plaster in CM (1:4) mixed with liquid WPC as per manufacturer's instructions confirming to required slope complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and as directed.

M & L for Modular point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as spcified and as directed as per following:- Note :- (i) Cost of cutting/leaving forming chases for conduits, sinking for modular metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed to be included for moduar metal flush boxes of requiste module and modular cover plates with frame of requisite module of colour as approved by GE.

One Light/fan/ex-fan point controlled by one switch.

One socket point on the same board with other switch complete.

One 3 pin 5 amps socket on independent board.

All as per item No-84 above but with 2.5 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.

All as per item No-84 above but with 4 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.

All as per item No 84 above but but one light point controlled by two 02 way switch board complete and all as directed by Engr-in-charge.

Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed. M & L for submain wiring complete all as specified and as directed.

M&L for submain (single phase) wiring complete with and including 6.0 sqmm two single core, (FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through Existing PVC conduit including accessories and fixed on walls and 6 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed. Note :- (i) Two runs of 6.0 sqmm PVC insulated wire and one run of 6 sqmm earth wire shall be measured as one unit length.

M&L for submain (single phase) wiring complete with and including 6.0 sqmm two single core,(FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC concealed conduit of suitable size including accessories and fixed on walls and 6 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed. Note :- (i) Two runs of 6.0 sqmm PVC insulated wire, one run of 6 sqmm earth wire and one run of PVC conduit shall be measured as one unit length.

M&L for submain wiring using 4 runs of single core FRLSH PVC insulated, unsheathed stranded copper conductor cable of size 4runs of 10 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including concealed PVC conduit of dia not less than 32 mm dia with standard acessories, along with two run of FRLSH PVC insulated, unsheathed, stranded copper conductor of size 2x 10 Sqmm as earth continuity conductor all as specified and directed(Note-4 runs of single core FRLS PVC cable 10 sqmm for three phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit)and making good the disturbed surface of wall etc complete all as specified and as directed. Note :- (i) Four runs of 10.0 sqmm PVC insulated wire and Two run of 10.0 sqmm earth wire and one run of PVC conduit shall be measured as one unit length. making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed.

Taking down old U/S existing DB any type including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.

S&F MCCB TPN DB, 4 way Vertical type, 440V, 3 phase with rated busbar 200 Amps, double door type suitable for MCCB as a incomer and MCBs as out going double door type ,grouted in walls with Fixing arrangemant complete all as specified and as directed.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 12 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 4 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed.

S & F MCB SPN/SP as per following specification in replacement complete all as specified and as directed:-

S&F MCB SPN, 6-32 Amps , 240/415 volts, breaking capacity 16KA complete all as specified and as directed.

S&F MCB SP, 6-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as directed.

S&F MCCB as per following specifications in replacement complete all as specified and as directed:-

S&F MCCB 40 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed.

S&F MCCB 63 amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F MCCB 100 amps, 4 pole, 415 volts,overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F MCCB 125amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F MCCB 63 amps, 3 pole, 415 volts,overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F MCCB 100 amps, 3 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA complete all as specified and as directed.

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts complete all as specified and as directed.

S&F switch Modular type, 16 Amp, 1 module single pole two way, 230 Volts complete all as specified and as directed.

S&F Bell push Modular type, 6 Amp, 1 module single pole , 230 Volts complete all as specified and as directed.

S&F socket outlet as per following specifications complete all as specified and as directed:-

S&F socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and as directed.

S&F socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and as directed.

S&F fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and as directed.

S&F in repair modular white cover plate as per following specification complete all as specified and as directed:-

S&F in repair modular white cover plate with frame but 1 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 2 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 3 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 4 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 6 module complete all as specified and as directed.

S&F in repair modular white cover plate with frame but 8 module complete all as specified and as directed.

S&F in repair modular metel flush box with following specifications given below complete all as specified and as directed:-

S&F in repair modular metel flush box but 1,2, module to suit as existing make complete all as specified and as directed.

S&F in repair modular metel flush box but 4 module to suit as existing make complete all as specified and as directed.

S&F in repair modular metel flush box but 6, 8 module to suit as existing make complete all as specified and as directed. NOTE for item No 103 to 104.03:- These items shall not be operated with new point wiring under items 84 to 87 hereinbefore.

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with LED bulb 9 watt complete all as specified and as directed.

S&F sheet metal enclouser TPN 4 way , Double door DB, IP-54 bus bar neutral link earth bar and din rail make MDS with provision of 01 X 63 Amps four pole MCB complete all as specified and as directed.

S&F MCB TPN 'C' curve 40 TO 100 Amps 415 Volts complete all as specified and as directed.

Taking down LED tube light fitting, 20 watt/10 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and as directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades & refixing ceiling fan of any make, any sweep , keeping side in store in safe custody for painting of ceiling fan complete,in situ with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete all as specified and as directed including writing MES No at the site.

Taking down Exhaust fan,sealing cable end,dismantling blades and removing fan and blades & refixing Exhaust fan of any make, any sweep , keeping side in store in safe custody for painting of Exhaust fan complete,in situ with synthetic enamel paint byspraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete all as specified and as directed including writing MES No at the site.

Removing and refixing water heater storage type, puff insulation type of 25 ltrs capactiy and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary fixing arrangement complete all as specified and as directed.

S&F decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 09 watt led filament lamp base E27 complete all as specified and as direceted.

M&L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, earth electrode, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters complete all as specified and as directed.

NOTE: The old valuable material obtained from taking down/dismantling/demolition shall be the property of Deptt and the same shall be deposited in MES store yard by the contractor with own arrangement irrespective of any distance as specified and directed by Eng In Charge, without claiming any extra cost from Dept.

M/S ASHRAFI CONSTRUCTION CO (BID ID -3407978)

HARI SINGH AND COMPANY (BID ID -3408098)

Beenu Co. Company (BID ID -3408361)

M/S BUDHRAM BISHNOI (BID ID -3407670)