Supply of Furniture for Laboratories, Seminar Hall, Conference Hall and Committee Room at CDLU, Sirsa

Amount

Supply of 2 Seater Sofa Set having size 1220x750x700mm depth, leatherite covering material for seat and back, cushion material of foam, zig zag spring and frame structure made of minimum 25mm wood. Warranty 3 years.

Supply of 3 Seater Chrome Plated Bench with arm and back rest having size 1760x550mm and height 900mm with following specification : main frame seat and back-mild steel, 2 no. arms and legs-cold rolled steel. Thickness of main frame 1.6mm. Warranty 3 years.

Supply of Centre Table having size 119+4x584mm and height 460mm, frame made of teak wood, top material should be 8mm toughened glass, storage made of wood, thickness of legs 45mmx45mm teak wood, natural finish of complete frame. Warranty 3 years.

Supply of Lab Table having following specifications : lab table having fixed storage i.e. combination of drawer and shutter storage plus sink cabinet, power sockets, eye wash and water outlet accessories etc. under bench storage with drawer and shutter, 3 way water flow, main understructure MS CRC sq. pipe 40x40x1.6mm powder coated, pre-polished 16 to 18mm granite finished at top, back, side, cover, filter panel made of CRCA MS 1mm thick powder coated, sink made of 5mm thick high density and elastic polypropylene width 950mm with good resistance to organic solvents. Depth of table 1240mm height of table 900mm, overhead storage 600mm(H) x 300mm(D) made of MDF board. Warranty 3 years.

Supply of Auditorium Chair for Seminar Hall having following specifications : back rest width 520mm, back height 800mm, arm to arm inner width 530mm, back rest to floor height 1050mm, seat width 480mm, seat depth 460mm, seat thickness 150mm, floor mounted type, seat with auto tip up mechanism with push back feature, seat rest assembled with 12mm thick flat plywood moulded with polyurethane foam and upholstered with 3 layer foam laminated fabric and injection moulded cover, fixed the under structure by anchors with washer and nut to ground, side panel made up of 2mm thick CR steel each side panel is clad with two fabric upholstered board of 9mm thick, leg frame fabricated with MS tube 60x40x2mm thick welded with grouting member, foldable writing pad, all steel component should be epoxy polyester powder coated40-60 microns. Warranty 3 years.

Supply of Stage Table having following specifications : size 2400x 650x750mm and 900mm at front (LxBxH) top of table made of 25mm thick flat single layer MDF board finish with 0.6 to 0.8mm thick laminate, gable end and modesty panel made from 18mm thick 3 layer pre-laminated particle board, storage unit having depth 485mm and width 400mm. the front of table covered with 18mm thick particle board. Warranty 3 years.

Supply of High Back Revolving Chair with fixed arm and push back. The height of chair 1080mm, back rest height 600mm, width 440mm, Seat height 420mm. the chair should have central tilt, height adjustment upto 100mm. The arm should be covered with polyurethane. The seat material should be PU foam covered with fabric. Thickness of plywood used in seat and back 12mm, thickness of polyurethane in seat and back 25mm. Warranty 3 years.

Supply of Medium Back Revolving Chair with fixed arm and push back. The height of chair 810mm, back rest height 460mm, width 480mm, Seat height 500mm. the chair should have central tilt, height adjustment upto 100mm. the aarm should be covered with polyurethane. The seat material should be PU foam covered with fabric. Thickness of plywood used in seat and back 12mm, thickness of polyurethane in seat and back 25mm. Warranty 3 years.

Supply of Revolving Lab Stool with mini back without arm. The height of stool 790mm, back rest height 200mm (overall 500mm), dia of seat 400mm with cushion 40mm. The stool should have central tilt, height adjustment. 5 legs, top material mild steel stove enamel, back rest and cushion covered with polyurethane foam 40mm. Under structure material made of CRCA sheet. Warranty 3 years.

Supply of Lab Stool. The height of stool 600mm, dia of seat 300mm. The stool should have 4 legs, top & under structure material made of stainless steel 202 G thickness 0.9mm. Warranty 3 years.

Supply of Cafeteria Round Table having top material of rubber wood 25mm with top finish 1mm thick mica, dia of table 900mmm, under structure made of 202 G stainless steel 50mm dia pipe, height of table 750mm, one no. central vertical support. Warranty 3 years.

Supply of Dining Chair without arm and without cushion, frame material MS powder coated, chair height 785mm overall, seat width 400mm, seat made of 12mm thick plywood 380mm round. Warranty 3 years.

Supply & Placing in Position 24 Seater U shaped Conference Table of size L-7350mm x D-2700mm x H-750mm. conference table closed from one end comprises of straight tables (SP 1 size : L-1350mm x D-600mm x H-750mm = 10 nos., SP-2 size : L-1500mm x D-600mm x H-750mm = 1 no.) and corner tables (size : L-600mm x D-600mm x H-750mm) which shall be made out of 36mm thick MDF board with veneer and PU matt finish. Table top shall be supported with 36mm thick side panel and modesty panels shall be made out of 18mm thick MDF with veneer over it. All exposed edges shall be provided with machine pressed veneer edge banding. Provision of 6 nos. flip top box for wire management and raceway under the table top for wires flow. Provision of wooden panel for wire management through floor to wire raceway under the table top. Complete as per specification mentioned above under the guidance of Engineer-in-Charge. Warranty 3 years.

Supply of Training Chair option 3 having high density foamed cushion back and seat one side handle in frame structure for half tablet support. Frame-MS powder coated with attached adjustable half writing pad. Writing pad with magazine tray size : W-490mm x D-360mm x H-820mm. Warranty 3 years.

Arterior Infra Solutions India

Ganpati furniture systems pvt ltd

Decor Modular Systems Private Limited

Nilkamal Limited

Life Style Interiors

IBS- Intelligent Building SOlutions

M/S TELU RAM AGGARWAL