ADDITION/ALTERATION TO EQUIMPMENT SHED (BUILDING NO 37) AT LPR KHAMARIA UNDER GE (P) NO 1 JABALPUR

Amount

Excavation in treanches in soft/loose soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation, laygint HT cable, poles, pipes etc or for shafts, wells exc 10 sqm on plan and getting out including dressing/trimming sides and levelling, grading and ramming of bottom excavation complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm thick in soft/loose soil after laying the cable complete all as specified and as directed.

Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Hardcore of broken stone/boulders gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L PCC (1:2:4) typeB2 using 40 mm graded aggregate as in foundation filling and mass concrete for embeding post.

S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS. 1161-1998 grade St-240 complete all as specified and directed.

S&F Rolled mild steel Plates (plain or chequered) channels, Square cut or notched (ordinary and counter sunk) forming holes, without any attachment GDE Fe-410-W E-250) quality-A complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal/square heads at one end and screwed the other/screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n.exc 10cm long dia of shank 10 to 15mm complete all as specified and directed.

S & F wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; similar work conforming to Fe 290 or E-165

M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over primed surfaces.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof complete all as spd .

Removing excavated material n.exc 50 mtr and depositing where directed, at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting n.exc 10 cm girth complete all as specified and directed.

Schedule of credit amount of Rs. NIL to be deducted during AOC

M/S RAJ BUILDERS

SUBHASH CHNADRA RAI