Natham Town Panchayat Repair and Maintenance work of Toilet at 1st ward Natham Govt.Hospital Dindigul Kottampatti Road at Natham Taluk in Natham Town Panchayat

Laying and Jointing PVC Pipe. Heading

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. etc., complete as per standard specifications and as directed by departmental Engineers

Plastering with cement mortar 1:5 (One part of Cement and Five part of M.Sand 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of M. Sand ), 20mm thick laid in-situ and pointed with same coloured cement etc., complete.including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special

Dadooing walls with Glazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of M. Sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special

Supply and fixing of Indian water closet with new glazed earthern ware Indian water closet of 22” Oriya type of approved quality & approved colour with “P” or “S” trap with sand cushion and forming flooring around the water closet using 40mm size broken brick jelly in cement concrete 1:2:4 of 4” thick and plastering with cement motar 1:3 20mm thick using river sand including fixing the water closet in position and giving necessary connection to CI stacks etc. complete including cost and conveyance of all materials and all labour charges etc.complete complying with standard specification and as directed by the departmental officer etc. complete. TNBP No. 100,102 & 103

Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 10.00 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A

Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A

Supply and fixing of 7/9 Watts LED (Like OSRAM,PHILIPS Etc) Including all charges as Directed by the Departmental Officers Etc,Complete,

Supply and delivery and fixing of 1000 Liter Capacity HDPE Water tank including loading,unloading, transportation and labourcharges for fixing charges etc.

Supplying and fixing in position best quality PVC soil / waste pipes of 110mmdia having 6 kg / sq.cm Etc,Complete as Directed by the Departmental Officers Etc,Complete,

Supplying and fixing in position best quality PVC pipes of 40mmdia having 10 kg / sq.cm. Etc,Complete as Directed by the Departmental Officers Etc,Complete,

Supplying and fixing in position best quality PVC pipes of 20mmdia having 10 kg / sq.cm. Etc,Complete as Directed by the Departmental Officers Etc,Complete,

Supply and delivery of 20 mm Dia PVC heavy type screw down tap Including all charges as Directed by the Departmental Officers Etc,Complete,

Providing Geophysical survey Charges

Drilling of 6”dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labour charges etc

Bore well up to 150 M

Bore well up to 151 M-180 M

Supply and fixing of 150mm dia PVC casing pipe including cost of materials and all labour charges etc.,

Supply and delivery of Submersible pumpset with motor confirm to IS 8034/2002 with isi making as per standard specification for deep borewell or the duty condition of (SINGLE PHASE 150M H x 20 lpm) provided the pump set should supplied with the 1m of flat submersible cable the pump set should be delivered at site including packing, transport extra complete.

Supply and delivery of pvc &GI specials including cost for materials and all labour charges for completed

Panel board upto 2.00 H.P.

2.50 Sqmm Submersible Cable

25 mmPVC Pipe

Bore cover

Bore Clamp

32mm G.I. Elbow

32mm UPVC PIPE

32 mm G.M Non return Valve

32 mmG.M Gate Valve

20mm G.I.Coupling

20mm Waste not Tap

Labour charges for the Erection of submersible pumpset in borewell/open well including fixing and jointing submesible cable with proper clamps upto the starter to requied depth and also fixing of riser pipes to the requird depth valves erection clamps etc, complete.

Supplying and fixing of 16Amps DP Switch with Metal Galad of 500 V with Fuse and Neutral (Side Handle) on T.W.Box with P.W.D.Earting(SD No.141)

Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains. (SD. 64).

Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm did (B Class) G.I.Pipe suitably bend at both ends with necessary angle iron upright and end support for main.(SD. 69).