8338-REPAIR AND POLISHING OF ALL TYPE OF WOODEN FURNITURE, BED HARD, TABLE BED SIDE, SIDE BOARD, BOOK CASES ETC AT OTA, MH, 12 MADRAS AND OTHER UNITS UNDER GE STM

Amount

Repairs to Chair Dining by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drg No FD-228/279

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Back Rest

Stiffener (Side)

Stiffener (Centre)

Repairs to Chair Writing by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drg No FD-250/280.

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Back Rest

Arm Rest

Stiffener (Side)

Stiffener (Centre)

Repairs to Chair Easy by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as shown on drawing No FD-229

Front Leg

Rear Leg

Side Rail of Seat Frame

Rear Rail of Seat Frame

Front Rail of Seat Frame

Arm Rest

Side Rail of Back Rest

Upper/Lower Rail of Back Rest

Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 75 x 75 x 20mm thick to chair dining, Chair writing, Chair Easy, Peg table, Centre table, Teapoy . Fixing of bracket should be done with fevicol and suitable steel screws as per std workmanship.

Removing Existing U/S PVC Bushes/ shoes from chair dining, Chair writing, Chair Easy, Chair easy cushioned and S & F new PVC Bushes/ shoes of best quality as approved with suitable steel screws.

Taking off existing U/S cane of various type of wooden chairs, cleaning the rebated portions and re caning with new cane plastic 2 mm and width 3.5 mm Godrej pattern all as shown on drawing. Cane shall be of make Maharashtra/Swastik/ Garware items are mentioned below:-

Dining Chair FD-228/279

Chair Easy seat & Back FD-229

Chair writing FD-250

Repairs to Bed Plywood Top by removing the following existing unserviceable members and providing new members including French polishing all as specified and as shown on drawing No FD-246

Removing the existing UNSV ply wood from the head board and providing new one side teak face plywood 4mm thick of size 900x450mm for both sides including 12mm half cut teak wood beading at the front and back ply wood face as shown on drawing.

All as per item No.7.01 here-in-before but for foot board of size 900x300mm

Removing the existing unserviceable stiffeners and S & F New stiffeners of II nd class hard wood of size 40 x 30 mm all as per drg.

Removing existing unserviceable 12mm thick plywood from Bed plywood top and Supply and fixing of new plywood 12mm thick BWR of size 1800 x 900mm conforming to IS 303 and as shown on drg.

Supply & fixing of corner bracket made out of 1st class hard (Teak) wood of size 100 x 100 x 25mm thick to bed hard. Fixing of bracket should be done with fevicol and suitable steel screws.

M & L for Repairs to the following Tables by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, all as specified and as shown on drawing.

Legs for Table Dining 8 persons FD-239/273/376

Long Rail for Table Dining 8 persons FD-239/273/376

Short Rail for Table Dining 8 persons FD-239/273/376

Stiffeners for Table Dining 8 persons FD-239/273/376

Legs for Table Dining 6 persons FD-239/273/376

Long Rail for Table Dining 6 persons FD-239/273/376

Short Rail for Table Dining 6 persons FD-239/273/376

Stiffeners for Table Dining 6 persons FD-239/273/376

Legs for Table peg

Top Rail (Long) for Table peg

Bottom Rail (Short) for Table peg

Legs for Table centre FD-235/274

Top Rail (Long) for Table centre FD-235/274

Bottom Rail (Short) for Table centre FD-235/274

Legs for Teapoy FD-232/382

Long Rail for Teapoy FD-232/382

Bottom Rail (Short) for Teapoy FD-232/382

Legs for Table writing FD-249/275

Top Rail (Long) for Table writing FD-249/275

Top Rail (Short) for Table writing FD-249/275

Stiffener (Long) for Table writing FD-249/275

Stiffener (Side) for Table writing FD-249/275

Side/Back side ply 6mm thick commercial plywood for Table writing

M&L for replacement of existing u/s Door Shutter with piano hinge for Table writing with new door shutter made of 18mm thick prelaminated particle board exterior grade ISI marked as per existing size and shape including fixing of S/steel piano hinges ISI Marked and beading as per drg and provide S/steel D type handle to the door of approved quality as directed.

M&L for replacement of existing u/s Drawer for Table writing with new drawer as existing size and shape and provide S/steel D type handle to the drawer of approved quality as directed.

Legs for Table 3'x2' with drawer FD-231/283/284

Long Rail (Top) for Table 3'x2' with drawer FD-231/283/284

Short Rail (Top) for Table 3'x2' with drawer FD-231/283/284

Triangular TW Corner Brackets of size 75x75x25mm for Table 3'x2' with drawer FD-231/283/284. Fixing of bracket should be done with fevicol and suitable steel screws.

M&L for replacement of existing u/s Drawer for Table 3'x2' with drawer FD-231/283/284 with new drawer as existing size and shape and provide fancy Knob as approved to the drawer.

Repairs to Table dressing ladies by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and shown on drawing (Drg No FD-251 & FD-378, (FD/MAP/07) )

M & L for replacement of UNSV looking Mirror of size as per drg with looking mirror 5mm thick electro copper plated with back of 6 mm thick ply wood commercial grade as per drg.

Top of table dressing ladies of size as per drg made out of 18 mm thick pre-laminated particle board with one side teak finish and other side balancing white duly beaded with 4 mm thick teak wood beading

Sliding glass shutter of size 270 x 300mm x 5mm thick complete.

Aluminium Channel of size 12 x22 x550mm

Aluminium Channel of size 12 x22 x380mm

Legs of size 45 x 45 x 150mm made out of 1 st class hard wood

Side rail of size 40 x 25 x 380mm

Front rail of size 40 x 25 x 900mm

M &L for Replacement of unsv drawer with new drawer as per drg and provide D type s/steel handle to table dressing ladies & Table dressing ladies (MAP) as per drawing

Replacement of unserviceable telescopic channel of best quality of suitable size for drawer of table dressing ladies (MAP) as per drawing and as directed. Make : Hettich/Godrej/Link

Replacement of unserviceable door shutter including stainless steel piano hinges of table dressing ladies (MAP) as per drg and complete all as specified.

Replacement of unserviceable knob of shutter and drawer with D type stainless steel handle of approved quality to be provided in table dressing ladies (MAP) as specified and directed by Engr-in-Charge

M & L for replacement of unserviceable cushion of stool dressing of table dressing ladies (MAP) with 75mm thick 40 density cushion including upholstery of best quality tapestry cloth of approved colour and texture. Cost of tapestry should not be less than 350/- per meter.

M & L replacement of unserviceable caster wheel of stool dressing of table dressing ladies (MAP) with heavy duty best quality caster wheel of approved quality as per drg and as directed

Repairs to Table dressing Gents by removing the following existing unserviceable wooden members and providing new first class hard wood (teak) members, including french polishing all as specified and shown on drawing (Drg No FD 230 & FD 379)

Looking mirror of size 760 x 380 x 5 mm thick electro copper plated mirror with back of 6 mm thick ply wood commercial

Mirror frame of size 20 x 25mm all around

Wooden member back of dressing mirror (Gents ) of size 35 x 25 x 750mm

Top of size 300 x 900 mm made out of 12 mm thick pre-laminated particle board with one side teak finish and other side balancing white duly beaded with 6 mm thick teak wood beading

Back made out of 12mm thick plywood commercial, size of 300 x 900mm

M&L for replacement of existing u/s Drawer with new drawer as existing size and shape and provide S/Steel D type handle as approved to the drawer.

Side Board (FD-26/FD-241)

Removing the existing unserviceable top/bottom of side board and supply & fixing new top/bottom of required size as per drg made out of 18 mm thick prelaminated particle board, exterior grade

Removing the existing unserviceable back of side board and supply & fixing new back of reqd size as per drg made out of 6mm thick plywood 5 ply, BWR grade all as specified and directed.

Removing the existing unserviceable door shutter of side board and S & F new door shutter of size 600x375mm made out of 18mm thick particle board exterior grade with suitable piano hinge and provide S/Steel D type handle to the door all as specified and as directed.

Removing the existing unserviceable side panel of the side board and supply and fixing new side panel of size 625x450mm made out of 18 mm thick particle board exterior grade with teak ply veneered one side and commercial ply veneered to other side all as specified and as directed.

M&L for replacement of existing u/s Drawer for Side board with new drawer as existing size and shape and provide S/Steel D type handle as approved to the drawer.

Bin lenin multipurpose MAP

Removing the existing unserviceable top/bottom of Bin Lenin and supply & fixing new top of size as per drg made out of 18 mm thick prelaminated particle board, exterior grade

Removing the existing unserviceable back of Bin lenin and supply & fixing new back of size as per drg made out of 6mm thick plywood 5 ply, BWR grade all as specified and directed.

Removing the existing unserviceable door shutter of Bin lenin and S & F new door shutter of size as per drg made out of 18mm thick particle board exterior grade with suitable piano hinge and provide S/Steel D type handle to the door all as specified and as directed.

Removing the existing unserviceable side panel of the Bin lenin and supply and fixing new side panel of size as per drg made out of 18 mm thick particle board exterior grade with teak ply veneered one side and commercial ply veneered to other side all as specified and as directed.

M&L for replacement of existing u/s Drawer for Bin lenin with new drawer as existing size and shape and provide S/Steel D type handle as approved to the drawer.

Supply and fix top of various tables. Table top shall be made of 18/19 mm thick prelaminated MDF board both side, exterior grade (grade-I, type-II) ISI marked with approved colour or shade as approved by GE of (make : Century prowud from Century ply/Green panel max from Green ply/Action Tessa) with 2 mm thick PVC edging of matching colour all round on table top etc shall be fixed with strong bonded chemical through hot pressed machine to be provided as per standard workmanship. Note: Hand pressed/manual pressed beading will not be accepted.rest all as specified and shown on drg.

Table Dining 8 Person (1800 x 900mm)

Table Dining 6 Person (1500 x 900mm)

Table Dining 3' x 3' (900 x 900mm)

Table Dining 4' x 3' (1200 x 900mm)

Table Peg (450 x 300mm)

Table Centre (900mm x 450mm)

Teapoy (450mm x 600mm)

Table Writing (1150 x 600mm)

Table 900 x 600mm without Drawer/with drawer

Preparation of existing surfaces of following wooden furniture by smoothing through sand papering and applying two coats of french polish, all as specified and as directed by GE/Engineer in Charge:-

Bed Hard with plywood top FD-246

Book Case wooden FD-237,355

Hat Stand FD-233/361

Side Board FD-26/FD-241

Table 900x900x760

Table Centre FD-235/274

Table Dining 6 Pers FD-239/273/376

Table Dining 8 Pers FD-239/273/376

Table Dressing Gents FD-230

Table Dressing Ladies FD-251/378

Table Peg FD-236/277/384

Table 900x600x760mm with /without drawer FD-231/284/283/224

Table Writing FD-249/275

Teapoy FD-232/382

Chair dining FD-228/279

Chair Easy FD-229

Chair writing FD-202/250/280

Chair Easy Cushioned FD-358

TV trolley(FD/E6/MAP-04)

M & L Stainless steel "D" type handle of size 120mm of approved quality including removing the existing UNSV Handles of drawers of TV trolley and all as specified and directed.

M & L 18 mm thick Pre- Laminated particle board exterior grade ISI marked for Top of TV Trolley with 4mm thick teak wood beading duly polished all around as per drawing and as specified and as directed including removing the existing UNSV Top of TV trolley. Make : Kit ply/Green ply/century/Archid /Action Tesa.

M & L 18 mm thick Pre- Laminated particle board exterior grade ISI marked for sides of TV Trolley with 4mm thick teak wood beading duly polished all around all as per drawing and all as specified and as directed including removing the existing UNSV Sides of TV trolley. Make : Kit ply/Green ply/century/Archid /Action Tesa.

M & L 5 mm thick Glass shutter with magnetic catcher with accessories for TV Trolley as per drawing and all as specified and directed including removing the existing UNSV/Broken Glass shutter of TV trolley. Make : Modi Guard/Saint Gobain

M & L Castors Wheels of best quality as approved all as per drawing and all as specified and directed including removing the existing UNSV/Broken Castors wheels of TV trolley.

Hat Stand With Mirror : Supply & fixing of the following components/parts of Hat stand with mirror, including dismantling of unserviceable components all as specified and shown on drg.

M & L for Replacement of unserviceable back ply wood 6 mm thick as per drg

M & L for Replacement of unserviceable front ply wood 3.5 mm thick teak face all as per drg

M & L for Replacement of unserviceable looking mirror with beading of hat stand as per drg.

M & L for Replacement of unserviceable pegs of hat stand with Brass pegs of size as per drg and as directed

Desk with seat for student (Small) (Age 11 to 14 Year) Model-II FD/CWE/01/08

M & L for Replacement of unsv top of desk with new top of size 950mmx400mmx18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading all-round to be fixed with fevicol as per std workmanship and as directed.

M & L for Replacement of unsv Box of desk with new Box of size (01 Nos bottom size 750mmx300mmx18mm thick including 02 Nos Side wall of size 300mmx165mmx18mm and 01 Nos back wall of size 750mmx200mmx18mm) thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading all-round to be fixed with fevicol as per std workmanship and as directed..

M & L for Replacement of unsv seat top of desk with new seat top of size 950mmx300mmx18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading all-round to be fixed with fevicol as per std workmanship and as directed.

M & L for Replacement of unsv back rest of seat of desk with new back rest of seat of size 950mmx160mmx18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading all-round to be fixed with fevicol as per std workmanship and as directed.

M & L for Replacement of unsv broken MS square pipe member like leg, stiffener, side rails, top rails, bottom rails etc from Desk with seat (Small) with new MS square pipe 25mm x 1.6mm thick member of where ever required with required size of member in the desk as above including required continuous welding to all-round to the square pipe for fixing as per std workmanship and as directed.

Welding the loose point of welded portion of steel frame of Desk with seat (Small) where the continuous welding required or welding left from the joints. The one continuous running welding shall be measured as one welding point. welding to be done as per std workmanship and as directed.

Removing paint by scrapping down old painted surface carrying out repairs such as removing the dents and minor welding wherever required and applying one coat of synthetic enamel paint of reqd shade over a coat of red oxide primer on the desk with seat for student (Small) , complete all as specified in drawing and as directed by Engineer in charge

Desk with seat for student (large) (Age 15 Year and above) Model-II FD/CWE/01/08

M & L for Replacement of unsv top of desk with new top of size 1050mmx460mmx18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading all-round to be fixed with fevicol.

M & L for Replacement of unsv Box of desk with new Box of size (01 Nos bottom size 845mmx325mmx18mm thick including 02 Nos Side wall of size 325mmx170mmx18mm and 01 Nos back wall of size 850mmx190mmx18mm) thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading all-round to be fixed with fevicol as per std workmanship and as directed.

M & L for Replacement of unsv seat top of desk with new seat top of size 1050mmx325mmx18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading all-round to be fixed with fevicol as per std workmanship and as directed.

M & L for Replacement of unsv back rest of seat of desk with new back rest of seat of size 1050mmx180mmx18mm thick Pre-laminated Particle board exterior grade ISI marked with suitable nut and bolts including half cut half round teak wood beading all-round to be fixed with fevicol as per std workmanship and as directed.

M & L for Replacement of unsv broken MS square pipe member like leg, stiffener, side rails, top rails, bottom rails etc from Desk with seat (Large) with new MS square pipe 25mm x 1.6mm thick member of where ever required with required size of member in the desk as above including required continuous welding to all-round to the square pipe for fixing as per std workmanship and as directed.

Welding the loose point of welded portion of steel frame of Desk with seat (large) where the continuous welding required or welding left from the joints. The one continuous running welding shall be measured as one welding point. welding to be done as per std workmanship and as directed.

Removing paint by scrapping down old painted surface carrying out repairs such as removing the dents and minor welding wherever required and applying one coat of synthetic enamel paint of reqd shade over a coat of red oxide primer on the desk with seat for student (Small) , complete all as specified in drawing and as directed by Engineer in charge

M/s KM Marimuthu Achary

LEO ENTERPRISES