Routine,Breakdown and Overhauling Maintenance

Amount

Routine Work(Round the clock work as per scope of WORK)

General Preventive routine checking/ maintenance of C W Pump, TWS system and associated equipments along with cleaning

Breakdown Maint. Of C W Pump

In case of B/D of sealing ring , intermediate shaft, barrel coupling etc. of CW pumps Complete dismantling, re-visioning of parts, replacement of damaged part to attend the B/D, its assembly and final trial run

Black bituminous painting of inside, outside surfaces of CW pump parts including cost of the paint as per scope of work.

Changing of damaged/worn out lub water lines of various sizes of CW pumps from lub water common header to minus level including drains, vents & valves etc.

Changing of worn out/damaged gland sleeve/ coupling of CW pump by a new one

Replacement of damaged expansion joint from discharge pipe line (1600 mm dia.) of CW pump.

Painting with synthetic green colour on the outer surface discharge pipe line (1600mm Ǿ) from T-joint of pump up to end of wall inside the CW pump house

Alignment of Motor with CW Pump and fix coupling.

Replacement of bend/providing patch/over lap up to 900 sq cm to attend leakage of Lub water line/Tank

Overhauling of CW Pumps.

Complete overhauling of CW pumps as per scope of work.

Black bituminous painting of inside, outside surfaces of CW pump parts including cost of paint as per scope of work.

Changing of damaged/worn out lub water lines of various sizes of CW pump from lub water header to the minus level including drains, air vents & valves as per scope of work.

Rectification of CW pump Anchor support.

Overhauling of gear Box of Butterfly Valves

Complete overhauling of gear boxes of electrically operated B/F Valves ( 1600 mm Ø) of C.W. discharge line as per scope of work.

Complete overhauling of gear boxes of manually operated B/F Valves (1600 mm Ø) of C.W. discharge line as per scope of work.

Overhauling/fabrication of Screen Gate

Overhauling including repairing, fabrication, epoxy painting and replacement of screen gate of Suction Chamber at CW Pump of ‘A’TPS, Anpara (01 Job consists of work of all 13 Nos. of Screen gates of suction chamber of particular Pump. Size of each Screen Gate= 4.4 x1.94m)

Fabrication/Repairing of Screen gates (Size of each Screen Gate = 4.4 x1.94m)

Routine Dewatering Work

Shiftwise Operation,checking and minor maintenance of dewatering pumps of different capacity, installed at various locations in ATPS((One job=8 hours work)

Shifting ,Cleaning, Breakdown and Overhauling Maint. Of Dewatering Pump and its accessories

Dismantling, shifting and installation of portable submersible sump pump of 3/5/10 HP capacity from one location to another along with all mountings and accessories.(1 Job=Shifting of one pump)

Cleaning of sump pit & disposal of mud, debris, foreign material etc. at a suitable place..(1 Job= work of 1 pit)

Cleaning of TG hall basement pit & disposal of mud, debris, foreign material etc. at a suitable place.(1 Job= work of 1 pit)

Coupling of horizontal dewatering pump: checking and inspection, minor repair/replacement of parts or coupling and alignment as reqd..

checking, inspection, servicing/ replacement of Pump bearing or other parts of SP-6L dewatering pump.

checking, inspection, servicing/ replacement of Pump bearing or other parts of SP-3L/ SP- 4L dewatering pump

Servicing of suction NRV (foot valve) of horizontal sump pump- SP-3L/ SP-4L/SP-6L.

Attending the jamming/ seizure of vertical sump pump including replacement of damaged / worn-out parts if reqd.

Vertical sump pump: attending breakdown including replacement of bearing,coupling or other parts if required

Overhauling of SP- 2H dewatering sump pump.

Overhauling of SP- 3L dewatering sump pump.

Overhauling of SP- 4L dewatering sump pump.

Overhauling of SP- 6L dewatering sump pump

Overhauling of SAM make permanent vertical sump pump.

Overhauling of Max Flow make permanent vertical sump pump of 10 KW capacity

THE UNIVERSAL CONSTRUCTION

M/S SCINTECS PROCESS CONTROL