Loading
Loading…
Loading…
Tender Value
₹2.7 Cr
EMD Value
₹5.4 L
Closing Date
22 May 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
AT KGP
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per para12.27 of tender document, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (TENDERS NOT ACCOMPANIED BY THESE DOCUMENTS WILL BE SUMMARILY REJECTED).
Tenderer must possess valid Electrical Contractor License and has to submit documentary proof for the said Electrical Contractor License along with their offer. (TENDERS NOT ACCOMPANIED BY THESE DOCUMENTS WILL BE SUMMARILY REJECTED).
Personnel having Requisite competency certificate of appropriate Voltage Class for this work and has to submit documentary proof for the said individual's competency certificate along with their offer. (TENDERS NOT ACCOMPANIED BY THESE DOCUMENTS WILL BE SUMMARILY REJECTED).
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. "Similar nature of work for this tender : (i) Wiring works of buildings, works of street light /High mast lights AND/OR LT /HT Panels, Cables . OR (ii) Works of 6.6KV/430V Sub-station and above.". The certificates for the private works shall not be accepted.(TENDERS NOT ACCOMPANIED BY THESE DOCUMENTS WILL BE SUMMARILY REJECTED)
26 conditions · 16 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All interested tenderer(s) are requested to see the attached tender document and act accordingly.
All General Instructions are available in the uploaded tender Document.
Option of Payment through Letter of Credit (L.C.): Tenderer(s) may submit option for taking payment through Letter of Credit (L.C.). [Refer para 7.1 of tender document].
Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as under: The conversion rate of US Dollars into Rupees shall be the daily representative exchange rates published by the Reserve Bank of India for the relevant date. Where, relevant date shall be as on the last day of month previous to the one in which tender is invited. In case of any other currency, the same shall first be converted to US Dollars as on the last day of month previous to the one in which tender is invited, and the amount so derived in US Dollars shall be converted into Rupees at the aforesaid rate. The conversion rate of such currencies shall be the daily representative exchange rates published by the International Monetary Fund for the relevant date.
Contract under EBR (IF): It is agreed by and between the parties that Railway shall continue to be held responsible for all obligations, risk and liabilities, whatsoever, arising out of or in connection with the Principal agreement and this novation agreement, whether during the progress of the work or after its completion. It is further agreed and understood by and between the parties that IRFC shall be the owner of assets, if any, arising out of execution of works as defined in the Principal Agreement, except the land whose ownership shall continue with Railway. Accordingly, the invoices shall be issued by capturing GSTIN of contractor (as the supplier) and GSTIN of IRFC (as bill to party). Also, the contractor shall submit the invoice, issued in the name of IRFC, to railway for processing payment by Railway to contractor subject to applicable TDS under the Income Tax, GST or any other applicable laws. It is further agreed by and between the Parties that IRFC shall be responsible to comply with Income Tax and GST laws in relation to filling of returns.
There are several changes in the tender document after the new GCC April 2022 is issued. Tenderer(s) are requested to go through the tender document & GCC carefully before the submission of the offer.
Clarification of Bids: To assist in the examination, evaluation & comparison and pre-qualification of the Tender, the Railway may, at its discretion, ask any Bidder for a clarification of its Bid. Any clarification submitted by a Bidder that is not in response to a request by the Railway shall not be entertained or considered. The Railway request for clarification and the response of the bidder in this regard shall be in writing. However, if a Bidder does not provide clarification of its bid by the date and time communicated in the Railway request for clarification, the bid shall be evaluated as per the documents submitted along with the bid.
The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids). Nominated officials are DEE/Con/Kharagpur, Office of the DEE/Con/Kharagpur, S. E. Railway.
Supply, erection, testing & commissioning of 25 KV OHE & Electrical general services work in connection with the work of Infrastructure facilities for augmentation of ROH capacity of wagons at Nimpura BCN shed from 250 to 450 per month at Kharagpur division, S.E.Railway
EL-CON-KGP-NMP-ROH-26-05
EL-CON-KGP-NMP-ROH-26-05
Open
Works - General
12 Months
Paschim Medinipur, West Bengal
₹0
₹5.4 L
22 May 2026
28 Apr 2026
8 May 2026
219 items across 8 schedules · ₹2,68,16,691.1 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of 11kV panel having 01 No VCB (horizontal draw out type) of capacity 3PH, 11kV, 630Amps as per IS : 13118/latest. Each Panel with VCB is motor and manually controlled spring charged mechanism, complete with CT, PT, Over current + Earth Fault and Master trip relays, Digital tri-vector meter, pf meter Voltmeter & Ammeter with heater circuit, annunciation, status indicator, hooter/alarm, including all other associated accessories with wrapped coloured sleeves copper Busbar of adequate capacity including a suitable Power Pack arrangement. The breaker along with its operating mechanism will be mounted inside a sheet steel cubicle complete wiring to complete the job with 1000Amp capacity Cu. Bus-Bar. | Set | 7.00 | 4,95,600 | 34,69,200 |
| 2 | Supply of Triple pole 11 KVx400 A Capacity gang operated air break switch as per IS:9921 complete with insulator, DO fuse, galvanized Steel Base, copper alloy Male- Female Contacts, Arcing Horns, M.S. square Rod for rocking operation, desired length of G.I. Pipe to operate the Air Break Switch from ground level with operating handle and locking arrangement. | Set | 2.00 | 12,517 | 25,034 |
| 3 | Supply of 11 KV Lightning Arrester metal oxide gapless type [as per IS 3070: PART-3, IS:2633 & IS:5621 (in 1 Set consists of 3 Nos. LA) with mounting hardware arrangement on the horizontal channel of Double- Pole/4-Pole structure. | Set | 1.00 | 4,142 | 4,142 |
| 4 | Supply & erection of Fire fighting equipment 5 Kg. capacity (DCPT) | Numbers | 4.00 | 5,252 | 21,008 |
| 5 | Supply & erection of Electrical insulated IS marked Insulated rubber mat 2m x 1m x 2cm. | Numbers | 12.00 | 529 | 6,348 |
| 6 | Supply & Installation of Standard enameled 11 KV/400 Volt danger/Caution board having impression of skull & bone with written "DANGER" 11000/400 Volt 2/2 Hindi, English & local language size 6"8" as per IS:255 | Numbers | 6.00 | 236 | 1,416 |
| 7 | Supply & erection of 11 kV Pin Insulator as per IS :731 & Insulator fittings as per IS: 2486 (Part-I,II & III), having minimum creepage distance 240mm, complete set including bolts, nut, washers & insulator fittings etc | Numbers | 15.00 | 245 | 3,675 |
| 8 | Supply & erection of 11 kV Disc Insulator as per IS :731 & Insulator fittings as per IS:2486 (Part-I,II & III), having minimum creepage distance of single insulator 430 mm,complete set including bolts,nut, washers & insulator fittings. | Numbers | 15.00 | 579 | 8,685 |
| 9 | Supply of LT panel board IP -56 Conforming to IS/IEC 60947-1&2 or latest with copper busbar of 800A, 3-Phase & Neutral 416Volt floor mounted type of 800.Amp, 50KA 4-pole Microprocessor based trip unit ACB (manual draw out) comprising 02 Nos. ACBs as incomer 01 No.ACB as a buscoupler. And 3 Nos x 400.Amp, 4-pole MCCB,36kA (adjustable Thermal and adustable magnetic setting type) & 3 Nos x 250,36kA Amp 4-pole MCCB, 2 Nos x 100 Amp 4-pole MCCB (adjustable Thermal and adustable magnetic setting type) as outgoing including indication lamp with each MCCBs as per their rating ,electronic Frequency meter, EF & OC relay ,Digital voltmeter & ammeter etc.with selector switch, LED indication lamp on each incoming & outgoing circuit . | Set | 2.00 | 6,76,475 | 13,52,950 |
| 10 | Supply of the Feeder Pillar box IP-65, plinth mounted outdoor type, 3 phase and neutral, 416V consisting of 4.Nos copper bus bar each 400A, 1X400A MCCB,36kA 4-Pole (Adjustable Thermal & Adjustable Magnetic setting) as incoming and 4X250A MCCB 4- Pole,36kA & 2x100A,25kA MCCB 4-Pole as per IS/IEC:60947-2, as outgoing with metering arrangement & LED indication lamp on each incoming and outgoing MCCB in suitable size duly painted 2mm CRCA steel sheets Enclosure with locking arrangment | Set | 6.00 | 2,84,060 | 17,04,360 |
| 11 | Supply of the Feeder Pillar box IP-65, plinth mounted outdoor type, 3 phase and neutral, 416V consisting of 4.Nos copper bus bar each 400A, 1X400A MCCB 4-Pole (Adjustable Thermal & Adjustable Magnetic setting) as incoming and 1X400A MCCB 4-Pole 35kA and 2X200A MCCB 4-Pole 25kA & 1X100A MCCB 4-Pole 10kA & 1X63A MCCB 4-Pole 10kA as per IS/IEC:60947-2, as outgoing with metering arrangement & LED indication lamp on each incoming and outgoing MCCB in suitable size duly painted 2mm CRCA steel sheets Enclosure with locking arrangment. | Set | 2.00 | 1,16,640 | 2,33,280 |
| 12 | Supply of the Feeder Pillar box IP-65, plinth mounted outdoor type, 3 phase and neutral, 416 Volt consisting of 4 Nos copper bus bar each 300A,1X250A MCCB 4-Pole (Adjustable Thermal & Adjustable Magnetic setting) 25kA as incoming and 4X100A MCCB 4-Pole 25kA and 2X63A MCCB 4-Pole 10kA as per IS/IEC:60947-2, as outgoing with metering arrangement & LED indication lamp on each incoming and outgoing MCCB in suitable size duly painted 2mm CRCA steel sheets Enclosure with locking arrangment. | Set | 4.00 | 97,248 | 3,88,992 |
| 13 | Supply of the Distribution Board IP-43 wall mounting type, 3 phase and neutral, 416 Volt consisting of 4.Nos copper bus bar each 300A with provision of 1 No x 200A, 4-pole MCCB as incoming & 1 No x100A 25kA 4P MCCB & 3 Nos x 63A 4P MCCB as outgoing with metering arrangement & LED indication lamp on each incoming and outgoing MCCB | Numbers | 6.00 | 59,915 | 3,59,490 |
| 14 | Supply of the Distribution Board IP-43 wall mounting type, 3 phase and neutral, 416 Volt consisting of 4.Nos copper bus bar each 100A with provision of 1 No x 100A, 4-pole MCCB 25kA as incoming & 4 Nos x 63A 4P MCCB 10kA as outgoing, housing in a suitable SP&N Prewired CRCA steel sheets enclosure with Neutral Link, Earth bar & Din Rail etc. | Numbers | 10.00 | 19,697 | 1,96,970 |
| 15 | Supply of the Distribution Board IP-43 wall mounting type with provision of 1 No x 63A 10kA, TPN MCCB with busbar as Incoming & 3 Nos x 32A DP MCB 10kA & 3 Nos x 16A DP MCB 10kA as outgoing as per IS/IEC 60898- 1,housing in a suitable SP&N Prewired CRCA steel sheets enclosure with Neutral Link, Earth bar & Din Rail etc. | Numbers | 10.00 | 12,267 | 1,22,670 |
| 16 | Supply of the Distribution Board IP-43 wall mounting type with provision of 1x32Amp TPN MCB 10kA as incoming and 4x16Amp DP MCB 10 kA as outgoing as per IS/IEC60898-1, housing in a TP&N Prewired 4-way MS Box Enclosure similar to Havells Cat. No.DHDMTHMKDRA04 | Numbers | 16.00 | 4,128 | 66,048 |
| 17 | Supply of IP65 (dust proof & jet water tight) junction box, made of high quality thermoplastic, Insulated & corrosion free, acid and chemical resistant, having high grade internally embedded gasket made of Polyurethane, fire retardant & self extinguishing, JB having size(L X B X H) of minimum : 450mm X 6000mm X 200mm fitted with 2 No. TPN- 100A, cable connector terminal / loop in loop out terminal with minimum 4.Nos cable entry of size 4 core 95 sq.mm arrangement. | Numbers | 30.00 | 3,061 | 91,830 |
| 18 | Supply of the Double door Distribution Board IP-43 wall mounting type with provision of 1x32A, 10kA Double Pole MCB as Incoming & 3x Double Pole MCB 6A-20A OR 6 x Single Pole MCB 6A-20A,10kA as outgoing as per IS/IEC 60898-1, with Neutral Link, Earth bar & Din Rail etc in duly painted Double Door type MS Box Enclosure | Set | 15.00 | 4,128 | 61,920 |
| 19 | Supply of the Welding feed terminal JB of capacity 200A in MS box with 2 Nos welding terminal stud with fly nut etc & fixing arrangement | Numbers | 16.00 | 377 | 6,032 |
| 20 | Supply of the Cable loop box ( fibre body) for 3 Phase in-coming and outgoing connection consists of 3 phase terminal and 15 Amp K - fuse as relevant IS. | Numbers | 25.00 | 679 | 16,975 |
| 21 | Supply of the APFC panel, 415V(+10% to - 15%) 3 Phase, 3wire/4 wire system, frequency 50Hz (± 6%), fault current 50 KA. 250KVAr capacity APFC panel in 7 stage i.e. 50KVAr (4 Nos.) HD Gas filled capacitor 440V, 50 Hz, 25KVr (2 Nos.), 5 KVAr (1 No.) suitable capacity contactor in every stage , 630A 3P MCCB with extended rotary handle as main incomer and Aux. contact 2C/O, suitable capacity HRC cylinderical fuses in every stage. Enclosure should be fabricated in 2mmVRCA sheet for Main Frame and door 1.6mm CRCA sheet for partition sheets and covers with IP 42 protection, powdered coated paint as per RAL 7032, IS:5. internal wiring should be 1sq.mm copper stranded and for control and CT wiring/power wiring by 2.5 sq.mm of 650/1100V grade. LED indication lamp for R Y G in incomer side,multifuction meter, 3 CTs 800A/5A for metering and 1 for PF measurement. Control Transformer 415V/240V, Auto manual selector switch and control MCB. | Set | 1.00 | 2,84,900 | 2,84,900 |
| 22 | Supply of the GI Flate of size 40mm x 3mm for Earthing of all structure and vital equipment including required nut, bolts & sockets etc. | Metre | 100.00 | 66 | 6,600 |
| 23 | Supply of the MCCB 400A 4 Pole, 36 KA with Sheet Steel Enclosure. | Numbers | 1.00 | 21,788 | 21,788 |
| 24 | Supply of the 200A 4 Pole 36kA MCCB with Sheet Steel Enclosure. | Numbers | 5.00 | 16,847 | 84,235 |
| 25 | Supply of 100A 4 Pole 25kA MCCB with Sheet Steel Enclosure. | Numbers | 10.00 | 7,755 | 77,550 |
| 26 | Supply of 63A,16kA 4 Pole MCCB with Sheet Steel Enclosure. | Numbers | 8.00 | 5,400 | 43,200 |
| 27 | Supply of the 32A/40A 4 Pole 'D' series MCB, 10kA with Sheet Steel Enclosure. | Numbers | 10.00 | 1,016 | 10,160 |
| 28 | Supply of Industrial type IP-67/66 Power socket with plug combined unit, 63A, 416V, 3P+N+E with provision for protection IP-67 with 63A, 4P MCB, and 100.Amps TPN Connector with Enclosure. Power socket should be assembled in a Rain proof, high quality Thermoplastic Polycarbonate IP-66/67 dust & jet water proof, corrosion, weather safe ,acid and chemical resistant, fire retardant, with internally embedded gasket box. | Numbers | 20.00 | 10,591 | 2,11,820 |
| 29 | Supply of the Industrial type Power socket DB 32A, 416V, 3P+N+E with 32A TPN MCB and 2P+E with 32A SPN/DP MCB assembled in sheet steel enclosure (similar to Havells model No.DHDPBEN032 and DHDPBDP032 ) | Numbers | 20.00 | 6,079 | 1,21,580 |
| 30 | Supply of LED Highbay fitting 150W with excellent thermal management along with IP66 protection complete with electronic driver (SMPS based constant current supply) with Short Circuit, Over Voltage & Surge Protection and all other accessories. | Numbers | 80.00 | 10,363 | 8,29,040 |
| 31 | Supply of the LED based 90-100W LED street light fitting fitted in pressure die cast aluminum alloy housing with IP66 protection, complete with electronic driver and all other accessories. | Numbers | 30.00 | 5,080 | 1,52,400 |
| 32 | Supply of the LED 1x18-20W T-8 indoor type Tube Light fitting with Aluminum housing having Luminous flux efficacy 120 Lm/Watt,CRI75 with Constant current driver complete with lamp and all accessories. | Numbers | 20.00 | 325 | 6,500 |
| 33 | Supply of the LED 2x18-20W T-8 indoor type Tube Light fitting with Aluminum housing having Luminous flux efficacy 120 Lm/ Watt,CRI75 for each tube light, with Constant current driver complete with lamp and all accessories. | Numbers | 60.00 | 419 | 25,140 |
| 34 | Supply of the Recess/surface mounting panel light fitting 2feetX2feet LED 36-40 watt with Constant current driver complete with lamp and all accessories. | Numbers | 40.00 | 2,215 | 88,600 |
| 35 | Supply of the Bulk head LED luminaire comprising of 10W LED lamp. | Numbers | 10.00 | 898 | 8,980 |
| 36 | Supply of the Energy efficient (5-star rating) Ceiling fan of 1200mm sweep with BLDC Motor including electronic regulator & suspension arrangement. | Numbers | 50.00 | 3,200 | 1,60,000 |
| 37 | Supply of the BLDC Exhaust Fans, 300 mm ,suitable for 230V, 50Hz, AC supply, Conformity to Indian Standrad IS: 2312 (latest), No. of Poles 2,Insulation Material Class E, Standard installation accessories such as Frame, Legs Set, Rubber Clamps & Other Hardware - inclusive in the scope of supply. | Numbers | 30.00 | 3,760 | 1,12,800 |
| 38 | Supply of the WALL Mounted Bracket fan, 3 blade with BLDC Motor, Sweep - 400mm complete with frame and all necessary accessories. | Numbers | 10.00 | 5,440 | 54,400 |
| 39 | Supply of the Wall mounting air circulator fan 600 mm sweep,230 V AC, complete with frame and all necessary accessories. | Numbers | 20.00 | 5,661 | 1,13,220 |
| 40 | Supply of Wire Mesh type Cable tray of Stainless Steel, 300mm width with SS fixing bracket, coupler & bend plat with suitable SS nut, bolt & washer etc. | Metre | 250.00 | 1,300 | 3,25,000 |
| 41 | Supply of the 3 phase energy efficient submersible pump set of capacity 50 LPM-- 205LPM, Head 142 mtr -- 20 mtr, with 3 Ph,415V AC Submersible induction motor of 5HP/3.7kW, confirming to Latest IS for pump and Motor . | Set | 2.00 | 37,350 | 74,700 |
| 42 | Supply of 3Phase,415 volt standard DOL Starter Submersible Pump Controler for 5HP/3.7kW pump in sheet steel enclosure with single phase preventer & under voltage protection with Supply of the Flat 3Core x 6 sq. mm (approx 50 mtrs length) PVC Insulated & PVC Sheathed Industrial copper conductor Cable for Submersible Pump Motors 1100 Volt, conforming to IS 694 . | Set | 2.00 | 21,910 | 43,820 |
| 43 | Supply of Earth cone of 2.8 M long, 54.4mm inside dia and 60.2 mm out side dia GI pipe. The pipe having conically tapered at one end and having sufficient no. of holes of 12mm dia. including connection by 2x8.No SWG GI wire and making of earth cone sump box as per Drawing No.CEE/G/A3/P-150. | Numbers | 50.00 | 1,125 | 56,250 |
| 44 | Supply, erection and testing of Maintenance free Earthing system comprising of 48.3 mm dia , 3 meter long earthing electrode of low carbon high tensile steel with 250 microns copper coating + carbon based conductive back fill compound & copper Clamp including suitable length earthing GI strip of 40 x 3 mm for termination works and construction of Earth sump box. | Numbers | 10.00 | 8,127 | 81,270 |
| 45 | Supply of the Street Light Pole of 6 meter length, hot dip Galvanised, Octagonal shape, fabricated from 3mm thick HT sheet (Grade BSEN 10025 - S355J0) with top dia 70mm AF (Across Flats) , bottom dia 130mm (Across Flat) , with base plate of size 220x220x12 mm (IS : 2062), earth lug, along with 1000mm long double arm bracket bent at an angle of 120 degree, made of 48.3mm dia heavy duty G.I pipe, including TS-600 grade J-type M20x600.mm long foundation bolts along with required quantity of templates for the pole & flush door 0.5m above the base plate consisting bakelite sheet, TPN-63A, 4- Way cable connector suitable for loop-in- loop-out of armoured cable. | Set | 24.00 | 7,786 | 1,86,864 |
| 46 | Supply of the LED Street Light Luminaire in Die Cast Aluminium Body with heat sink in aluminium extrusion,IP66, LED light 45Watt - 50 Watt,230V. | Numbers | 60.00 | 2,208 | 1,32,480 |
| 47 | Supply of the Street light panel with Astronomical/digital timer 24 hrs, contactor rating 32A/TP MCB rating 40A/TPN. | Numbers | 2.00 | 16,558 | 33,116 |
| 48 | Supply of the Hot dip galvanized flange mounted type High mast (Grade BSEN 10025 - S355J0) of 20M height complete with 3 point suspension system, head frame canopy, 6mm stainless steel wire ropes to carry up to 12.Nos luminaries complete mounting bracket & accessories wich, one length 2.5 sqmm 8 core flat electrical trail copper cable 1100V grade, foundation bolt, nut, washer and Top & Bottom templates, lightning arrestors, lantern carraige,double drum winch, 3-phase 1.5HP Motor,earthing arrangement etc suitable for with standing basic wind speed of 180KMPH including suitable 3PH power tools, including twin aviation obstruction neon light.as well as manual arrangement for raising lowering for hiltable/lowering of lantern carriage with one unit winch with all necessary accessories. including Outdoor stand mounted Feeder Pillar with 63A 4P MCB incomer, dial timer, TP contactor for the Automatic switching of luminaries, power tool control with 9A contactors and raise lower push button, incoming 25 sqmm & outgoing 16 & 25sqmm terminals | Set | 1.00 | 2,61,069 | 2,61,069 |
| 49 | Supply of the LED Flood Light Luminair in Die Cast Aluminium Body with heat sink in aluminium extrusion, IP-66, Tempered Glass, LED light 190-200 Watt with Constant Current driver | Numbers | 12.00 | 9,168 | 1,10,016 |
| 50 | Supply of Heat shrinkable indoor/outdoor end termination kit/Straight through cable jointing kit suitable for 11 KV XLPE 3C x 70/95/120/150/185/240 sq. mm. XLPE cable | Numbers | 20.00 | 9,253 | 1,85,060 |
| 51 | Supply & erection of DSL(Down Shop lead) line complete with supporting/ mounting brackets and insulators for EOT cranes as similar to the existing system or as per crane system. (Rate of DSL is with support masts per metre bay length). | Metre | 100.00 | 20,000 | 20,00,000 |
| 52 | Supply of Rubber insulated gloves seamless type, - for test voltage 25000V five fingers size 355mm as per latest IS -4770-1991. Test certificate to be provided (gloves must be marked test voltage 25000 V working voltage 17000V .manufacture name, month & year of manufacture should be indicated. Make: Any IS approved. | Set | 6.00 | 2,200 | 13,200 |
| 53 | Supply of MCB Protected Power socket 25 A with 3/5 modular type socket & starter in a enclosure for A.C point. (similar to Havells Cat. No.DHDUCDP0253016-25) | Set | 10.00 | 914 | 9,140 |
| 54 | Supply,installation and commissioning of fabricated name board in three language (glow sign board ) of GI sheet with aluminium frame .The board shall be provided with LED light. | Square Foot | 100.00 | 725 | 72,500 |
| 55 | Supply & erection of Sand bucket/ Fire buckets complete set as per IS : 2546 (set of Six nos. of 9 litre capacity) with one no. stand | Set | 3.00 | 3,144 | 9,432 |
| 56 | Supply and installation of sub-station layout board/shock treatment chart. | Numbers | 2.00 | 1,126 | 2,252 |
| 57 | Supply of 1.1 KV 3.5/4 CORE 50/70/ 95/120 sq.mm LT straight through heat shrinkable kit. | Numbers | 20.00 | 2,488 | 49,760 |
| 58 | Supply of Industrial Power Socket Distribution Board (DB) rated at 125A, 416V, 3P+N+E, comprising the following: 100A, 4- Pole MCCB for circuit protection 125A, 5-Pin Round Top & 5-Pin Round Industrial Socket & Plug (01 each) Fully assembled in a sheet steel enclosure, ensuring durability and compliance with industrial standards. All necessary accessories, wiring, terminations, and mounting arrangements are included for a complete and operational system. | Numbers | 30.00 | 30,200 | 9,06,000 |
| Schedule total | ₹1,51,05,867 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
I_CT_GCC-
ATTACHMENT
GCCcorrectionslip1to11_com.pdf GCC Correction slips 1 to 11
ATTACHMENT
TenderdocumentNMP_1.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
GCCcorrectionslip1to11_com.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .