PROVIDING AND LAYING PIPE LINE IN REMAINING STREETS, DEVELOPMENT OF WATER WORKS, REPAIR OF P.C. OHSR AND PROVIDING FUNCTIONAL HOUSEHOLD TAP CONNECTIONS ETC. AT WATER SUPPLY SCHEME BAKHATGARH, BLOCK SEHNA, CONSTITUENCY MEHAL KALAN OF DISTRICT BARNALA.

Amount

Repair of OHSR

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects as per CSR 28.90

(AGAINST OLD) Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge) size 150 mm i/d as per CSR 28.27A

Repair of Expension Joints complete in all respects size 150 mm i/d

P/F OHSR Jali complete in all respects.

P/F Inside Aluminium Ladder of OHSR including material & Labour complete in all respects

P/F Outside M.S. Ladder of OHSR including material & Labour complete in all respects

Repair of OHSR Vertical Wall and Bottom Dome including material & Labour complete in all respects

Credit of old Sluce Valve 2 Nos (-)

Repair of Pump Chamber

Conglomerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling. using mechanical mixer for mixing of material as per CSR no. 14.9

Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material as per CSR no. 14.10

12.5mm thick cement plaster 1:4 as per CSR no. 15.9

Scraping of White washing inside of Pump Chamber & Scraping of snowcem robbiacem etc as per CSR 8.31 (a)

White washing 2 coats inside of pump chamber. as per CSR 16.2

Distempering with dry distemper of approved manufacture One coat on Old distempered work as per CSR 16.8

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade as per CSR 16.13

Painting Two or more coats excluding priming coat with synthetic enamel paint in all shades on Wood work, Metallic or plastered, concrete surface to give an even shade. as per CSR 16.17

Painting Two or More coats with synthetic enamel paints in all shades on Old Wood Work or Metallic or plastered or concrete surface to give an even shade including rubbing down old paint. as per CSR 16.18

Applying priming coat with metal primer on new steel or iron work including preparation of surface.. (Metalic) as per CSR 16.20

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Metalic)as per CSR 16.19

Supplying & fixing glass panes including special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area. as per CSR 18.25 (b)

Providing, Laying fixing & jointing of PVC pipes as per ISI-4985 (ISI marked with the prior approval of Engineer in charge) along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications for more than 3 mtr street width including excavation & back filling complete in all respects as per Analysis-14A as per CSR 28.13

PVC Pipe 63 mm o/d 6 Kg sqcm

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method including excavation , stringing and jointing of pipe as per CSR item 28.71

Connection of existing PVC/AC (All dia) pipe with new PVC (All dia) pipe including cost of PVC/AC tee, D-joint ,PVC saddle piece, earth work in excavation & back filling etc complete in all respects as per PWD Sepcification/Satisfaction of Engineer in charge .

Providing water connection to house hold up to wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects as per site condition

Repair of water connection to house hold up to wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects as per site condition Improvement of old Connections

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kg cm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 450 LPM against a head of 88.00 mtr (15.00 BHP) along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including M.S. Column Pipe of suitable size 80 mm =51 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 4.00 mm^2 = 120 mtr (reputed make) complete in all respects as per standard Specifications.

Less Credit of Old Machinary ,Electrical Control Panel Board including Delivery

DEVELOPMENT OF HEAD WORKS SITE

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-5.

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including D-4 & Analysis A-6 complete in all respects

Construction of Cement Concrete, Foot Path with Pre Cast Kerb & earth filling inside water works as per standard Drawing & Analysis

Painting & Writing MS Sign Board as per standard size of DWSS as per analysis A-24 Complete

PART-B (O & M) For 3 Month

Providing Bleaching Powder Solution/ Sodium Hypo Solution complete in all respects