Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹25.5 L+₹2.0 L (8.65%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹26.8 L+₹3.3 L (13.9%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹28.0 L+₹4.5 L (19.2%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹31.5 L+₹8.0 L (34.0%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | M/s Chandra Mohan and Sons L5 | M/s Sachkhand Traders L4 | Spectrum Enterprises L1 | M/s Bhadoria Associates L2 | Khushi Muskan Engineer & Developer L3 | Gaurav India Corporations L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) including demoliton of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed. | 10 | Cum | 5,700 ₹57,000 | 3,000 ₹30,000 Lowest | 3,300 ₹33,000 | 4,000 ₹40,000 | 5,000 ₹50,000 | 4,852 ₹48,520 |
| 2.00 | M&L for 15mm thick rendering/plastering by using readymix mixture made with white cement based polymer modified self curing mortar on newly prepared surface complete all as specified and directed | 100 | Sqm | 300 ₹30,000 | 250 ₹25,000 | 300 ₹30,000 | 200 ₹20,000 Lowest | 275 ₹27,500 | 295 ₹29,500 |
| 3.00 | M&L for 15mm thick plastering by taking down cement or cement lime plaster using ready mix mixture for plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish out of premises of MOD land all complete all as specified and directed | 620 | Sqm | 320 ₹1,98,400 | 250 ₹1,55,000 | 130 ₹80,600 Lowest | 250 ₹1,55,000 | 275 ₹1,70,500 | 315 ₹1,95,300 |
| 4.00 | M&L of 5 to 7 mm plastering ceiling by taking down cement or cement lime plaster, using ready mix mixture for plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish out of MOD land complete all as specified and directed | 50 | Sqm | 180 ₹9,000 | 200 ₹10,000 | 131 ₹6,550 Lowest | 300 ₹15,000 | 325 ₹16,250 | 315 ₹15,750 |
| 5.00 | M&L for preparation of Newly plastered ceiling surfaces and applying two coat of white wash complete all as specified and directed | 50 | Sqm | 10 ₹500 | 10 ₹500 | 15 ₹750 | 6 ₹300 Lowest | 15 ₹750 | 30 ₹1,500 |
| 6.00 | M&L for preparation of Old ceiling surface and applying One coats of white wash complete all as specified and directed | 3,000 | Sqm | 6 ₹18,000 | 10 ₹30,000 | 5 ₹15,000 | 4 ₹12,000 Lowest | 7.5 ₹22,500 | 18 ₹54,000 |
| 7.00 | M&L for preparation of old plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and directed. | 1,500 | Sqm | 5 ₹7,500 | 17 ₹25,500 | 10 ₹15,000 | 4 ₹6,000 Lowest | 9.5 ₹14,250 | 18 ₹27,000 |
| 8.00 | M&L for preparation of old plastered or unplastered surface of wall and applying two coat of white wash complete all as specified and directed. | 500 | Sqm | 8 ₹4,000 | 17 ₹8,500 | 15 ₹7,500 | 6 ₹3,000 Lowest | 11 ₹5,500 | 20 ₹10,000 |
| 9.00 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. | 3,000 | Sqm | 20 ₹60,000 | 10 ₹30,000 | 5 ₹15,000 Lowest | 5 ₹15,000 Lowest | 50 ₹1,50,000 | 10 ₹30,000 |
| 10.00 | M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. | 3,720 | Sqm | 20 ₹74,400 | 20 ₹74,400 | 13 ₹48,360 Lowest | 18 ₹66,960 | 18.5 ₹68,820 | 15 ₹55,800 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
26 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) LUCKNOW
GE (WEST) LUCKNOW PIN 226002 C/O 56 APO
INTERNAL PERIODICAL AND CONNECTED WORKS MD ACCN IN ZONE E AREA OF AGE B/R-II UNDER GE (WEST) LUCKNOW
2025_MES_723303_1
GE/W/LKO/T-29 OF 2025-26
Open Tender
Civil Works
Item Rate
240 days
LUCKNOW
AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (WEST) LUCKNOW
₹70,000
Yes
10 Oct 2025
29 Jul 2025
2 Sept 2025
29 Jul 2025
26 Aug 2025
12 Aug 2025
29 Jul 2025 - 5 Aug 2025
Amount
M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) including demoliton of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed.
M&L for 15mm thick rendering/plastering by using readymix mixture made with white cement based polymer modified self curing mortar on newly prepared surface complete all as specified and directed
M&L for 15mm thick plastering by taking down cement or cement lime plaster using ready mix mixture for plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish out of premises of MOD land all complete all as specified and directed
M&L of 5 to 7 mm plastering ceiling by taking down cement or cement lime plaster, using ready mix mixture for plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish out of MOD land complete all as specified and directed
M&L for preparation of Newly plastered ceiling surfaces and applying two coat of white wash complete all as specified and directed
M&L for preparation of Old ceiling surface and applying One coats of white wash complete all as specified and directed
M&L for preparation of old plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall and applying two coat of white wash complete all as specified and directed.
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed.
M&L preparation of New plastered surface of walls and applying two coats of oil bound distemper complete all as specified and directed.
M & L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper including preparation of surfaces complete all as specified and directed.
M & L for old plastered surfaces of walls and applying subsequent coat of oil bound distemper complete all as specified and directed.
M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down, cutting and chasing steel water tubing and connections of 15mm bore complete all as specified and directed
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel, cutting and chasing water tubing and connections of 20mm bore complete all as specified and directed
Supply & Fixing in repair copper alloy long body bib taps half turn suitable for 15mm bore pipe with capstan head complete all as specified and directed
S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed
S&F in repair two way angle valves 15mm bore, fancy type, cast copper alloy, matt chrome finish with wall flange, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified and directed
M&L for 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to wall / sink / WHB complete all as specified and directed
S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and directed.
Supply & Fixing in repair CP shower rose fancy type 125mm thick with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed
S&F in repair CP health faucet (with 1.50 mtr tube) fixed to Angular Stop Cock and complete wall hanging arrangement complete all as specified and directed
S&F in repair 5mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F in repair 5mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F in repair PVC low level PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including PVC flush pipe 32 mm dia with bend complete all as specified and directed.
S&F in repair syphonic action kit for PVC flushing cistern 10 ltr capacity complete all as specified and directed
S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.
S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S & F LDPE waste pipe, 32/ 40 mm dia, suitable for WHBs/sinks, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed
Stainless steel Grating doom 100mm dia complete fixing in floors in repair complete all as specified and directed
Stainless steel Grating doom 100mm dia with waste hole complete fixing in repair floors complete all as specified and directed
S & F in repair plastic water closet seatcover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed
S&F 15mm half turn brass Spindle for bib tap complete all as specified and directed
S&F CP Towel ring round with round flange complete all as specified and directed
S&F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed .
S&F in repair Waste coupling for Sink size 32/40 mm of PTMT (half or full threaded) (Minimum weight 32mm?45gms/40mm-60 gm complete all as specified and directed
S & F in repair Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe including waste copling 32mm size full thread complete all as specified and directed
S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding complete all as specified and directed
S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, including Supply and fixing of PVC seat and cover for pedestal pan complete all as specified and directed
S&F in repair float ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in position rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position including float ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) all as specified in SSR Part I including dismatling of exisitng tank complete all as specified and directed
S&F in repair position rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position icluding float ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) all as specified in SSR Part I including dismatling of exisitng tank complete all as specified and directed
S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin/sink etc. with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S&F in repair 25mm dia stainless steel curtain rod, (min wt300 gm/RM) superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall including bend ,Tee etc complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall including Bend ,Tee complete all as specified and directed.
S&F in repair 0.36 mm dia stainless steel grade 304 wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S& Fin repair 4 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.
S&F WPC cabinet and cupboard in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick WPC sheet & provision of shutters made out of 18 mm thick one side decorative laminated WPC sheet density not less than 600 kg/ Cum all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings and required knobs in each shutters as per site requirement and as per make and specification mentioned as per drawing complete all as specified and directed
Supply and fixing 30 mm width of flaps continuous piano hinges Mild steel, bright finish or electroglavanised complete all as specified and directed.
S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed
S&F 100mm long M S Cromium Plated, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed
Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from site as directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site as directed.
Taking down Shutters of any description but exc 1 sqm and n exc 2 Sqm each complete all as specified & directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge incl M.S. hold fast/ lugs or SS dash fasteners complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed
M & L 30 mm thick Factory made solid WPC (Wood plastic Composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixed with 15 x 15 square tube in side rails with screwing 8 x 28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws. The density shall be as per manufacture instruction complete all as specified and directed
S & F of 200mm long MS Cromium plated barrel tower bolts of extructed section complete all as specified and directed
Supply& fix MS ordinary pattern spring "plate type" including roller & roller plate complete all as specified and directed
S&F 250 mm long MS Cromium plated sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed
S & F of 150mm size Extruded aluminium alloy powder coated handles (As per sample kept in sample room) fancy type, fabricated type, anodised complete all as specified and directed
M&L for 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with door complete all as specified and directed
Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square guard bars with 6"(152.4mm) pitch, complete for finished item of work including of all taxes, design complete all as specified and directed
M/s Bhadoria Associates (BID ID -3398661)
Khushi Muskan Engineer & Developer (BID ID -3394706)
M/s Sachkhand Traders (BID ID -3398506)
M/s Chandra Mohan and Sons (BID ID -3399413)
Gaurav India Corporations (BID ID -3407162)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .