Provision of boundary identification marker at Range Area

Provision of boundary identification marker at Range Area

M&L for site clearance incl cutting and dressing of the existing vegetation of all types and all sizes wherever required for the approaches and alignment of area etc for soft loose soil

M&L for excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation etc for shafts , wells cesspits and similar work not exceeding 10 Sqm on plan and not exceeding 1.5mtr in depth for getting out in hard / dense soil, complete as specified and directed by Engineer in charge

M&L for boring 300mm dia bored cast in situ piles upto 2.5mtr depth, getting out and disposal of soil to distance of 50 metres using DMC method ( Direct Mud Circulation) for soft / disintegrated soil. Complete all as specified and directed by Engineer-in -Charge

M&L for M-25 (Design Mix) RCC (20mm graded aggregates) in piles upto 300mmdia , foundations incl rafts, footings, plinth beam bases for columns, basement slabs and similar work. Complete all as specified and directed by Engineer-in -Charge

M&L for sand filling under precast concrete interlocking paver floors or in foundations including watering and consolidation complete all as specified and directed

M&L PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation filling, mass concrete , sub-base and similar work . Complete all as specified and directed by Engineer-in -Charge

M&L for Reinforced Cement concrete (design mix) M-25 (20mm graded aggregate) in foundations including rafts footings, foundation beams, plinth beams, bases for columns etc basement slabs, pile cap and mass concrete

M&L for Reinforced Cement Concrete (design mix )M-25 (20mm graded aggregate) in columns, pillars, piers, posts and struts

M&L for Mild steel bars10mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

All as per above but 5mm dia and over upto and includding10mm dia in stirrups, spacers and binders

Formwork to sides of concrete foundations, footings, bases of columns, raft beams, soffits of foundations, plinth beam, pile cap and similar work.

Formwork to sides of rough finished surfaces concrete pillars, posts, struts, piers, columns .

M&L rendering 15 mm thick on any surface of concrete or brickwork in CM1:6 finished even and smooth without using extra cement complete

M&L for preparation of newly plastered surfaces of wall and finishing wall with acrylic smooth exterior weather coat paint of required shade ( Two or more coat applied @ 1.67Ltr/10Sqm over and including priming coat of exterior primer applied @2.20Kg/10Sqm) all as specified and as directed

Writing “PXE” on two sides of column face of 0.2m size using good quality enamel paint

SUSANDHYA ENTERPRISES (BID ID -3135855)

M/S ACHUTA ENTERPRISES (BID ID -3135824)

Jagannath Engitech Technology (BID ID -3133357)

M/S MAA GAYATRI ENTERPRISES (BID ID -3137660)

R K ENTERPRISES (BID ID -3137685)

Dellepson Infotech System (BID ID -3133456)

M/S JANAKI ENTERPRISES (BID ID -3137285)

MS VIDYANJALI (BID ID -3137506)