Repair and Renovation of Jawan Barrack No 8 and 9 at IRBN Campus, Port Mout SW Providing IEI to Jawan Barrack No. 8 and 9

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

c) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch

b) 15/16 A switch

c) 3 pin 5/6 A socket outlet

d) 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. a) 3 Module (100mmX75mm)

b) 6 Module (200mmX75mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required a) 3 Module

b) 6 Module

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) a) 6 way (4 + 18), Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40A

Supplying and fixing of Recess Mounting LED Square 1'x1' 18W panel fitting similar to C& S Cat No.CYGNUS-C/18W/1x1/W or its equivalent etc., as required.

Supplying and fixing of Round Recess mounting 12W LED down light fitting similar to C& S Cat No. CARINA-RND/12W/W or its equivalent etc., as required.

Supplying and fixing of 2ft 14W mirror light fitting similar to Crompton Cat no. LCL-14-CDL or its equivalent etc., as required.

Supplying and fixing Bakelite batten/ angle holder including connection etc. as required.

Supplying of 12Watt LED Lamp in the existing Batten Holder similar to C&S Cat No. LTHPLEDLAMP12W/B22 or its equivalent etc., as required.

Supplying of BLDC Energy efficient AC Ceiling Fan 1200mm Sweep (Colour: Opal White, Brown) without Remote similar to crompton ENERGION Riviera 5 Star ISI Marked with out regulator or its equivalent etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of 300mm sweep, 900 RPM Heavy duty Exhaust fan equivalent to Havells Model : Turbo Force SP or its equivalent etc., as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

M/s G K Construction

DAYAL HALDER

KARBHAGAM SALES AGENCY

M/s Sai Electrical Works