Providing, Laying and Fixing of 630mm HDPE Raw Water Line and allied Works under AMRUT 2.0 by way of Replacement of worn out E and M machinery and upgradation of 33/11KV SS and civil works at WSS Pokhribal

Amount

Electro-Mechanical Works (Part-1)

Replacement of existing Wornout 5 Cusec 40 M Head, 120 HP Pumping unit at Stage 1st by way of, Design, Manufacture, supplying at site, Installation, Testing & Commissioning of 5 Cusec capacity, 40 M dynamic head vertical turbine pumping unit coupled with Sq. Cage Induction Motor of 120 HP rating mounted on common base frame/Motor Stool at Stage 1st. Other Details are as per Annexure.

Sluice Valves: Supply installation, testing and commissioning of DN 250, PN 1.6 Sluice valve. Other details are as per Anneure.

Non return Valves: Supply installation testing and commissioning of DI Reflux Non-Return valve of 250mm size PN 1.6 Other details are as per Anneure.

Dismantling Joints Fabrication, providing, installation, testing and commissioning of 250 mm Nominal Diameter 10 mm thick Mild Steel Dismantling Joint on the delivery line of Three no VT pumps. Other details are as per Anneure.

Delivery Manifold: Fabrication, providing, installation, testing and commissioning of Mild Steel delivery manifold for connecting the individual delivery lines of pumps with the 400mm diameter Rising Main. Other details as per Annexure.

EOT Crane : Fabrication, Erection, Testing and Commissioning of Double Girder Motorised 3-Ton capacity Overhead Travelling Crane. Other details as per Annexure.

Marine Grade Motorised Aluminium Boat: Provide of IRS complaint and certified aluminium boat along with propeller engine with having passenger capacity of 8 persons. Other details as per Annexure.

Providing of Multipurpose Heavy Duty 250 Amp Potable Singl phaseArc Welding Machine. Other details as per Annexure

630A Air Circuit Breaker; Replacement of worn out 630A Air Circuit Breaker (ACB) fitted on the secondary of 630KVA 11/0.44KV Power Transformer located inside the premises of pump house stage 1st . Other details as per Annexure.

APFC Panel: Supply , Installation, testing and commissioning of APFC contactor based CRCA Panel. Other details as per Annexure.

Pumping Units; Design, manufacture, supply, installation, testing and commissioning of 05 Cusec Capacity, 84 M Head coupled to 270 HP Horizontal Type Pump. Other details are as per Annexure

Foot Valve : Providing & installation of swing type flanged CI foot valve 300mm dia conforming to IS 4038. Other details as per Annexure.

Sluice Valves: Supply installation, testing and commissioning of DN 250, PN 1.6 Sluice valve. Other details are as per Annexure

Non return Valves: Supply installation testing and commissioning of DI Reflux Non-Return valve of 250mm size PN 1.6. Other details are as per Annexure

A. Transformer and Equipment Foundation

Earth work in excavation by manual means in trenches for foundations, cables etc. (not exceeding 1.5 min width) and for shafts, wells, pits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected:1 meter from cutting edge All kinds of soils

Providing , laying , compacting & ramming of stone boulders of size for back filling of the excavated soil upto plinth level

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:4:8 (1 cement :4 coarse sand :8 graded stone agg. 40 mm nominal size (Crushed)

Providing & laying in position Reinfoced Cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed) M-15 Grade PCC for Transformer Bed

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed) M-15 Grade PCC

Reinforcement of RCC work incl. cutting and placing in position incl. MS binding wire including its carriage upto site.

Centering & shuttering incld. strutting, propping etc. & removal of form for foundations ,footings ,basses for columns

Providing and fixing of MS channel Iron of sorts as per site requirment

Filling back excavted earth in trenches including ramming etc

B. Improvement in earthing of 1X 1.6 MVA 33/11KV Sub Station by fitting an earthing mesh in the following manner

Earthwork excavation by manual means as per below details including dressing of sides

Providing, Fitting of GMS Spike Earthing Rod (2.5 M Long 20mm dia. ) Solid electrodes each at an interval of 3M along the periphery of the yard.

P/F of G-I strip ( 50x6mm & 25X3mm size) at an interval of 3M connecting each strip with the corresponding electrode, thereby forming a mesh of 3x3 M --

Excavation for constructing an earthing pit consisting of 04 No holes and Providing, Fitting of earthing electrodes (3M Long 40mm dia. G-I Pipe. )

P/F of 100 mm Dia PVC Treatment Pipes

Construction of Cable Trench

Earth work in excavation by manual means in trenches for foundations, cables etc. (not exceeding 1.5 min width) and for shafts, wells, pits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected:1 meter from cutting edge All kinds of soils

Providing , laying , compacting & ramming of stone boulders of size for back filling of the excavated soil upto plinth level

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:4:8 (1 cement :4 coarse sand :8 graded stone agg. 40 mm nominal size (Crushed)

Providing & laying in position Reinfoced Cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed) M-15 Grade PCC for Transformer Bed

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : 6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Cement Plaster in Coarse Sand of 12 mm thickness in 1:4 Mix 13.4.1

Supply,Design,cutting, Straightening,Fabrication, Welding and fixing of steel work MS Steel for making cable Duct/cable Rack with proper arrangement for Power and control Cables. Angle iron 50x50x6.

Supply,Design,cutting, Straightening,Fabrication, Welding and fixing of steel work MS checqered Plate for making cable trench covers for Power and control Cables with proper lift handles. MS Chequired plate of 5 mm thickness... 17.5 SqM

D. Yard concreating /Metaling

Earth work in excavation by manual means in trenches for leveling of yard etc. (not exceeding 1.5 min width) and for shafts, wells, pits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, incl

Providing , laying , compacting & ramming of stone boulders of size for back filling of the excavated soil upto plinth level

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:4:8 (1 cement :4 coarse sand :8 graded stone agg. 40 mm nominal size (Crushed)

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed) M-15 Grade PCC

Yard metalling by way of supply & spreading of Bajri of 40mm nominal size in the complete Yard area (both bays) within toe walls of fencing and i/c anti weed treatment and site surfacing complete in all respects, as per specifications and directions of the Engineer Incharge. (Any other work incidental to complete the work shall not be paid extra)

P/F of Galvanised Nuts and Bolts

E. 33kv Transformer Bay of single bus SUB‐STATION MAIN EQUIPMENT

Supply ,Installiation ,Testing and Commissioning of 33 kV Vacuum Circuit Breaker (36 kV, 1250A, 26.2 kA, Outdoor Type). Other details as per Annexure

Supply ,Installiation ,Testing and Commissioning of 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA)

Supply ,Installiation ,Testing and Commissioning of 33 kV Lightening Arrestors (33 kV, 10kA, Station class, ZnO, Polymer) gap less (1 No. per Φ)

Supply ,Installiation ,Testing and Commissioning of 33 kV Polymeric Composite Disc Insulator 36 KV, min falling load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

CONTROL CABLES

Supply ,Installiation ,Testing and Commissioning of 6 Core 2.5 mm² Control cable copper Armoured , 1.1 kV Grade, ISI, FRLS.

Supply ,Installiation ,Testing and Commissioning of 4 Core 2.5 mm² Control cable copper Armoured , 1.1 kV Grade, ISI, FRLS.

Providing and fixing of Lugs, Ferrules etc.

CONDUCTOR & HARDWARE

Providing ,laying ,stringing and Tensioning of 150 mm² ACSR Conductor Wolf

Providing and Fixing of T Clamps

Providing ,laying ,stringing and Tensioning of 100 mm² ACSR Conductor Dog

F . 11kv Indoor Switch gear of 33/11 kv sub station

Supply ,Installiation ,Testing and Commissioning of (1+2)11 kV VCB Panel Board. Other details are as per Annexure

11 kV XPLE Power Cables‐

Supply , Laying ,Testing and Commissioning of 11 kV 3-Core XLPE 120 mm² armoured Aluminum Cable ound wire, FRLS

Providing and fixing of 11 kV Heat Shrinkable Cable Termination Kit for incoming Cable (Single/Three core) (120 - 185 mm2)

Providing and fixing of 11kV Indoor Heat Shrinkable Cable Termination Kits

Providing and fixing of11kV Outdoor Heat Shrinkable Cable Termination Kits

Providing and fixing of 11 kV Heat Shrinkable Cable Termination Kit for Outgoing Cable

Providing and fixing of11kV Indoor Heat Shrinkable Cable Termination Kits

Providing and fixing of11 kV Outdoor Heat Shrinkable Cable Termination Kits

G. 100 KVA 33/0.4 kV Auxillary Sub-Station

Supply ,Installiation ,Testing and Commissioning of 100 kVA,11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Copper wound). Other details are as per Annexure

Supply, installation and testing of 33 kV, Lightening Arrestor,(33 kV ,10 kA ,Station class,ZnO, Polymer) gapless

Supply, installation and testing of 33 kV Isolator, with Earthing Blade (36kV,800 A, Outdoor ,3 poles,25 kA).

Supply, installation and testing of 33kV Drop Out Fuse set

Supply, installation and testing of Galvanised iron of sorts

Supply, installation and testing of Galvanized Nuts & Bolts of sizes

Supply, installation and testing of Cement bottoming 1:2:4 mix as per Standards 0.5cum per pole

Supply , Laying ,Testing and Commissioning of 120 mm² XLPE LT Cable 4 Core, armoured, FRLS

Providing and fixing of Earthing of 100 KVA SubStation-- Other detils are as per Annexure

Supply ,Installiation ,Testing and Commissioning of MCCB ‐ 200 Amps 36KA, 4P

H. MISCELLANEOUS EQUIPMENTS 33/11 KV SUBSTATION

Supply ,installiation ,testing and commissioning of Battery Bank . Other details are as per Annexure

Fabrication, testing and comissiong of Distribution Panel (30 V, DC) made of CRCA . Other details are as per Annexure

Supply ,installiation ,testing and commissioning of Distribution Panel (415 V, AC) made of CRCA. Other details are as per Anexure.

supply of Rubber Mat 1mx2m 19mm thick

Supply of Fire Extingiusher Co₂ Type of 4.5 kg capacity for control room

supply of Sand Bucket Fire Extingiusher with sand (3 Buckets)

supply of supply of Helmet

supply of Rubber Gloves for 33 kV level

supply of Rubber Gloves for 11kV level

supply of Safety Belt

supply of Safety Shoes

Supply of Earthing Rod 5 Mtr Long with 25 mm sq cable 12 M

supply of HV Detectors all voltages

Providing and fitting of 120 Watt LED flood Lights to be installed in four directions on the existing Octagonal poles and are of following specifications Input Voltage: 90-240V Frequency:50HZ Power factor: >0.9 ColourTemp: 4K-6.5K Beam angle:120 deg to 170 deg Lumens :12000 Operating Temp: -20 deg C to 60DegC

I. Shifting of 1 MVA 11/0.44 kV Distribution Transformer from existing Bed to New Bed.

Dismantling of all the accessories of the Transforrmer like LA Set, Link Set, insulators and conductor etc.

Engagement of Hydra Crane (with capacity not less than 8T at full boom length) for shifting Transformer to safer place within premises to facilitate working space for concrete laying in phased manner to ensure minimum disruption in operation of the scheme.

Fitting of all the accessories of the Transforrmer like LA Set, Link Set, insulators and conductor etc. Testing of the Trnsoforer.

Cost on account of O&M of Electro-Mechanical works. Details as per bid documents

For 1st Year

For 2nd Year

For 3rd Year

For 4th Year

For 5th Year

Civil Works (part-2)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Mechanical means

Manual means with a lead of 1 mtr from cutting edge

P/L and laying of dry stone soling on level hand packed including all types of carriages.

P/L in position cement concrete of specified grade excl. the cost of centering & shuttering. All work upto plinth level 1:4:8(1 cement :4 coarse sand :8 graded stone agg. 40mm nominal size) crushed

Providing and laying in position cement Concrete of specified grade excluding the cost of centring and shuttering . All work upto plinth level 1:3:6 (1 cement :3 coarse sand : 6 graded stone agg. 20mm nominals size) crushed

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in super structure above plinth level upto floor V. level; by manual means.

Centering and shuttering incl. Strutting propping etc and removal of form for Foundation , footing , bases of coulnms etc for mass concrete

Centring and shuttering including shutting , propping etc and removal of forms for: suspended floor , roofs , landing, balconies and access plateform.

Reinforced cement concrete work in beams, suspended floors,roofs having slope upto 150 landings balconies , shelves , chajjas , lintels , bands ,plains window sills , staircase and spiral stair cases upto floor five level excluding the cost of centring , shuttering , finishing : and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C work including straightening cutting , bending , placing in position and binding all complete T.M.T bars.

15mm cement plaster on the rough side of single or half bricks wall of mix:1:4 (1 cement :4 fine sand) at all floor levels complete

12 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement : 6 sand ) at all floor levels complete

Providing wood work in frames of doors , windows , clerstory , windows and other frames, wrought framed and fixed in position .IInd class kail wood.

Providing and fixing paneled or paneled and glazed shutters for door, windows and clerestory windows including ISI marked black enameled M.S Butt hinges with necessary screw second class kail wood 30mm (including panells for doors)

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4 mm with wire of dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enameled M.S butt hinges with necessary screw : Second class Kail wood

Providing and fixing curtain rods of 1.25mm thick chromium plated brass plate, with two chronium plated brass brackets fixed with C.P brass screws and wooden plugs, etc whenever necessary complete. 25mm dia

Providing and fixing aluminum tower bolts ISI marked ( anodic coating not less than grade AC 10 as per IS : 1868 ) Transparent dayed required colour or shade with necessary screws etc complete. 100x10 mm

Providing and fixing aluminum handles ISI marked ( anodic coating not less than grade AC 10 as per IS : 1868 ) Transparent dayed required colour or shade with necessary screws etc complete. 100 mm

Providing and fixing glass panes wuith wooden fillets in windows,celestory windows ,all complete with 4.00 mm thick glass panes

Providing and fixing bright finished brass latch with necessary screws etc complete 300x16x5 mm.

Providing and fixing Ist quality ceramic glazed wall and floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing water closet squatting pan ( indian type W.C. pan) with 100mm sand iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device ( handle lever) conforming to IS ; 7231, parryware/hindware/ seabird / orient (coral)/ hindustan/ Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever requierd.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I/M.S brackets 15mm C.P brass pillar , taps, Kingston / Gem/ Techno Parko /Jaguar /Escko or euivalent brand 32mm C.P brass waste of standard pattern, including painting of fittings and brackets , cutting and making good the walls wherever requierd . White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board : 510 x 1040mm bowl depth 250mm

Providing and fixing G.I inlet connection for flush pipe connecting with W. C pan.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete 32mm dia Flexible

Providing and fixing 100mm sand caste iron grating for gully , floor or Nahani trap.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing following PVC fixtures approved quality.

a) door junction

b) plain bend

c) collars

d) 100 mm to 75 mm reducers

a) plain bend

b) collars

c) Cowel

Providing and fixing of floor trap complete PVC made.

a) 100mm dia.

Relocating of Hut upto 200 m lead as per directions of engineer in charge

Providing and fixing of G.I pipes complete with G.I fittings and clamps including cutting and making good the walls etc. internal work

a) 15mm dia. Nominal bore

b) 20mm dia. Nominal bore

Providing and fixing of G.I unions complete with including cutting and making good the walls etc

a) 15mm dia. Nominal bore

b) 20mm dia. Nominal bore

Providing and fixing of G.I cross over complete with including cutting and making good the walls etc

Providing and fixing of G.I tanki nipples complete

a) 15mm dia. Nominal bore

b) 20mm dia. Nominal bore

Providing and fixing C.P. ball valve of approved quality.

a) 15mm dia. Nominal bore

b) 20mm dia. Nominal bore

Providing and fixing C.P. Nipples of approved quality.

25mm to 50mm long, 15 and 20 mm

Providing and fixing C.P towel rod 600x20 mm long of approved quality

Providing and fixing unplasticised - Rigid PVC PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion;with necessary stays / clamps with fasteners having working pressure of 4kg/cm2 of make Supreme or finolex only :- all complete including testing of joints and pipes for leakage etc.:- (Including cost / Carriage of material by Mechanical transport)Providing and fixing unplasticised - Rigid PVC PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion;with necessary stays / clamps with fasteners having working pressure of 4kg/cm2 of make Supreme or finolex only :- all complete including testing of joints and pipes for leakage etc.:- (Including cost / Carriage of material by Mechanical transport)

50 mm dia

75 mm dia

110 mm dia

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms of make hindware/Cera/Jaquar only: (With all Carriages) a) 15 mm nominal bore

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge all complete of make hindware/Cera/Jaquar only:-. (With all Carriages)

Providing and fixing C.P. brass angle valve for basin/ wall mixer and geysers points of approved make conforming to IS : 8931 15 mm nominal bore of make hindware/Cera/Jaquar or as approved by site incharge (With all Carriages)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with all fittings and the base support for tank ( with all Carriage )

Providing and fixing C.P. brass stop cock ( concealed) of standard design and of approved make concorming to IS : 8931 of make hindware/Cera / Jaquar only: (With all Carriages) a) 15 mm nominal bore

Providing and fixing of electric points incld. Cost of cable , cost of service line,lamps and other accessories. Including all carriages as per directions of engineer in charge.

Heating points .

Lighting points.

50 Watt LED Flood Lights(havells)

Applying priming coat : With ready mixed pink or grey primer of approved brand and manafacture on wood work (hard and soft wood).

Painting with oil type wood preservative of approved brand and manafacture . New work(two or more coats)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Welded) a) operator room cum quarter b) stage II pump house and allied facility

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. a) Operator room cum quater b) stage I pump house c) stage II pump house and allied facility

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

a) operator room cum quater

Ridges plain (500 - 600mm)

Barge board (Upto 300 mm)

b) stage II pump house and allied facility

Ridges plain (500 - 600mm)

Barge board (Upto 300 mm)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. i) Hot finished welded type tubes a) opreator Room cum quater b) stage II pump house and allied facility

Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). 8.1.1 Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab upto 0.5 sqm)

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.1 Marble Work

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Finishing walls with acrylic smooth exterior paint of required shade on old work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood 35mm

Renewing glass panes, with wooden fillets wherevenecessary : float glass of 4.0 mm ( weight not less than 10 kg/sqm )

Providing ad fixing of 19 mm thick multilayered plywood sheet of size 6x4 ft icluding cutting, fixing all complete icluding painting of the ply sheet one coat of primer and two coats of enamel paint

Providing and fixing cupboard shutters with 25mm thick veneered particleboard IS: 3097 marked exterior grade (Grade I) of approved make including second class teak wood lipping of 25mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of engineer-in-charge With decorative veneering on one side and commercial veneering on other side

Providing and laying Ceramic glazed floor and wall tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Re-lettering with black Japan paint of approved brand and manufacture.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .

Jungle Clearance including uprooting of rank vegetation, bush wood, trees, etc.

Replacement of damaged 7.5 HP submersible pump of approved brand of Activated Carbon Chamber by providing & installation of 3 phase 15 HP discharge 2 cusecs Open Well Submersible type pump of Darling, KSB, or equivalent brand having dynamic head 8 mtrs incl. carriage all complete job incl. providing & fixing of Mug 20H starter all complete with all electrical works necessary for succesful commissioning.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Providing & fitting of 1.5 ton AC 5 star of reputed make including all accessories including voltage stablizer for successful commissioning as per the directions of Engineer in Charge.

Supplying of office furniture like superior chairs, tables, etc of reputed make as per the directions of Engineer in Charge incl. of all carriage charges.

Carriage of material by Mechanical transport from source to actual site of work including loading, unloading and stacking of material

Cement/Steel from Rainawari avg. lead 5kms

Sand from Delwa avg. lead 15kms

Agg 40mm from Panthachowk avg.lead18 kms

Agg 20mm from Panthachowk avg.lead 18 km

Bricks frome Budgam avg. lead 30 kms

KESARIMPEX (BID ID -2313366)

Union Equipment and Services (BID ID -2306517)