REPAIR AND MAINTENANCE OF LEAKAGE/SEEPAGE AND JOINERY WORK IN MD OFFICERS ACCN AT TARAPORE OFFRS ENCLAVE, RANGPURI IN THE AREA OF AGE B/R-II UNDER GE (SOUTH) DELHI CANTT-10

Amount

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6, to be finished even and smooth without using extra cement with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed. Note : WPC will be paid separately.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L for providing and applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling and finished fair even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water Proofing Compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing of new plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and as directed.

M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over including one coat of birla white putty on whole surface, complete all as specified and as directed.

Dismentling floors, hearth or wall tiling including cement morter bedding (but not backing) including removing rubbish off the premises complete all as specified and as directed.

M&L for joint free Vitrified Ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

M&L for joint free vitrified ceramic tiles 8-9 mm thick (Square/ rectangular) area of each tile not exceeding 0.36 sqm as in skirting laid over and including 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for Joint free Non skid ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.18 sqm not exceeding 0.38, in floors etc. laid over and including 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

M&L for joint free light shade ceramic tiles 8 to 9 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in skirting etc. laid over and including 10mm thick cement plaster in CM 1:4 as in backing set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for joint free first quality Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc laid over and including 15mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for joint free Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and as directed.

M&L for joint free Glazed ceramic coloured tiles of 300x200x7mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc. laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing’s or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including removing from site complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including removing from site complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections including removing from site complete all as specified and as directed.

S&F 15mm bore GI tubes (ISI marked, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

S&F 20mm bore GI tubes (ISI marked), medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

S&F 25 mm bore GI tubes (ISI marked), medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

S&F in repairs plastic WC seat cover white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device complete all as specified and as directed.

S&F in repairs sink mixer for mixing valve 15mm dia, Hot and Cold CP brass fancy including joints to steel pipe or unions , including fittings complete all as specified and as directed.

S&F in repairs mixer for mixing valve 15mm dia, Hot and Cold CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings complete all as specified and as directed.

S&F in repairs wall mixer for mixing valve Hot and Cold water Screwed Down for iron pipe 15mm dia CP brass fancy including joints to steel pipe or unions, including fittings for complete all as specified and as directed.

S&F in replairs vitreous china wash hand basin white, oval type over counter Wash hand basin size 550x 420mm, including necessary waste pipe and coupling, Fixing in Granite countern complete all as specified and as directed.

S&F in repairs CP health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white/ off white complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 litre capacity complete all as specified and as directed.

S&F in repairs PVC waste pipe 32mm bore, 65cm long plain/ corrugated including suitable adopter complete all as specified and as directed.

S&F in repairs stainless steel grating dome 125 mm dia of best quality complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125mm size with arm complete all as specified and as directed. (Make : Parryware/Hindware/Cera)

S&F in repairs CP waste coupling 32 mm dia suitable for wash hand basin or kitchen sink complete all as specified and as directed.

S&F in repairs stainless steel plate rack made of 1mm thick stainless steel sheet of size 910 mm x 460 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10mm dia stainless steel hollow pipe @ 60mm centre to centre complete all as specified and as directed.

S&F in repairs SS sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S&F in repairs PVC trap 100mm bore (floor/Nahani) trap with grating including jointing to waste pipe in cement concrete 1:2:4, type B-1 complete all as specified and as directed.

S&F in repairs 15mm size brass chromium plated Stop valve/angle valves fancy type cast copper alloy complete all as specified and as directed.

S&F in repairs 15mm bore angle valve/stop cock chromium plated, cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type) screwed for both ends for iron or for unions complete all as specified and as directed.

S&F in repairs bib taps long body 15mm bore, chromium plated cast copper alloy, fancy screwed both ends complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with brass nut of length 450 mm for hot water pipe complete all as specified and as directed.

S&F in repairs brass spindles with knobs (05 No) suitable for concealed stop valves/ bib tap/pillar tap/hot and cold (WHB/Sink/Wall) mixture etc. all as per sample complete all as specified and as directed.

S&F in repairs PVC syphon cylinderical type push button complete for low level flushing cistern complete all as specified and as directed.

S&F in repairs PVC long bend for low level flushing cistern complete all as specified and as directed.

S&F in repairs HDPE PVC lid (cover) for 300 to 1000 Litres capacity PVC tanks complete all as specified and as directed.

S&F in repairs toilet paper holder of brass chromium plated fixed to walls with CP brass screws complete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) including applying a bond coat of Latex : Water : cement - 1:4:6 consumption @100gm/sqm on the brick wall surface to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders complete all as specified and as directed.

Dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site of work complete all as specified and as directed.

M&L for rotational moulded polythylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed.

Dismantling of water tanks of any type/pattern not exc 250 ltr and removing from site of work complete all as specified and as directed.

M&L for rotational moulded polythylene water storage tanks 250 litres capacity (Rectangular with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed.

S&F in repairs 15mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs 25mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs 25 mm size Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates hook and pintle hinges, large hasps and staples chains, hand made sliding bolts clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Taking down eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.

S&F in repairs for PVC (SWR) bends/Tee/ of radius, suitable for 110mm dia PVC pipes exess door fixed complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.

S&F in repairs for PVC (SWR) bends/Tee of radius, suitable for 75mm dia PVC pipes fixed complete all as specified and as directed.

S&F in repairs 15 mm size brass chromium plated Two way angle valves fancy type cast copper alloy complete all as specified and as directed.

S&F in repairs chromium plated grating with 100mm dia of approved make including fixing with 1:4 C:M to floor/nahani traps etc. complete all as specified and as directed.

S&F in repairs 125mm x 100mm PVC gully traps square & round mouthed trap 'P' including case iron grating and fixed, including necessary excavation and earthwork , concrete in bed, surrounds, kerbs etc. and jointing to drains in CM 1:1 complete all as specified and as directed.

M&L for 40 mm thick (average thickness) cement concrete 1:2:4, type B-0 using 12.50mm graded stone aggregate as in flooring/ roof pedding , finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to three stories bldgs complete all as specified and as directed.

S&F 16-18 mm thick Granite slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like over and including 15mm thick cement fixed in cement mortar (1:6), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and as directed..

S&F in repairs Brass chromium plated bottle traps for wash basins with inlet and outle screwed for pipe or connections including necessary packing, union and cap and fixed 40mm-270 gms) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and as directed.

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and as directed.

S&F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed. .

S&F in repairs prelaminated particle board 19/20 mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work complete all as specified and as directed.

S&F in repairs continuous (piano) hinges, brass, bright finish complete all as specified and as directed.

S&F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed.

S&F in repairs stainless steel telescopic channel of size 300mm to 500mm complete all as specified and as directed.

S&F 6 mm thick teak wood lipping for 18/19 mm thick particle board fixing with nails complete all as specified and as directed.

S&F butt hinges, stainless steel, ISI Marked 100mm size complete all as specified and as directed.

S&F aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and as directed.

S&F in repairs aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed.

S&F in repairs butt hinges, stainless steel, ISI Marked 50 mm size complete all as specified and as directed.

S&F in repairs mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of eire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repairs aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repairs MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc. complete all as specified and as directed.

S&F in repairs MS butt hinges 50 mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc. complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.

S&F in repairs aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.

S&F in repairs aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long complete all as specified and as directed.

S&F in repairs for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed.

S&F in repairs for stainless steel door stopper 150mm long with double legged rubber bushes at the end complete all as specified and as directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc. complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc. complete all as specified and as directed.

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specified and as directed.

Taking down aluminium windows shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings, rollers and panels complete all as specified and as directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square not exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for running welding in repairs including cleaning and preparing surfaces for welding thickness of metal to be welded not exc 6mm and not exc 9 mm such as MS butt hinges to MS frame, broken steel windows or ventilators, iron doors and similar work complete all as specified and as directed.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any discription or thickness in floors complete all as specified and as directed.

S&F granite (of any type) tiles 12 mm thick machine cut ,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in cooking plateform complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar situations complete all as specified and as directed.

S&F in repairs mild steel, plain, black sheet 1.0mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F in repairs mild steel grade Fe-290 Gde-E-165 quality-A as in framing for doors cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and as directed.

M&L for complete removal of existing treatment from external surfaces or a part thereof, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) including applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100gm/sqm on the brick wall surface to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of Cement base paint over a coat of primer, including scaffolding arrangement, trestles, ladders complete all as specified and as directed.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

M/S GOPAL JEE SINGH

A N BUILDERS

M R INTERIOR HUB

amisha trading co

Jai Ambay traders

P R Constructions

M/S Parmod Johar