PROVISION OF CERTAIN B/R AND E/M WORKS SERVICES AT STATION ARMOURY, APPROACH ROAD AND GATE FOR OPS ROOM AND HARDSTANDING PATH AT CERTAIN LOCATIONS AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any type of soil, complete all as specified and directed.

Surface dressing in soft/loose soil n exc 15 cm deep complete all as specified.

Removing surplus excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.

S&F Mild steel angle/flat iron/chanel framed work such as iron gate, ladder, SWT rame, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F rolled mild Steel work Fe-410-W(Gde- E-250) quality-A' in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as spd.

M&L, preparing new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing , fixing arrangements for frame etc complete all as specified and directed

M&L 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed to timber framework complete all as specified and as directed.

S & F Aluminium (Die cast ) body door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs.

M&L for Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified

Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M&L for Preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L Hardcore of Broken stone / boulders of gauge n.exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to a true surface complete all as specified

M & L 100 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in sub base of flooring/ hard standing finishing the surface even and smooth

M & L for Glazed ceramic tiles in vertical surface 300 x 450 x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed 10mm thick in cement mortar 1:3 finished rough to receive wall tiles etc complete all as specified.

M&L for preparation of old painted surfaces of wall and applying one coat of cement base paint complete as all specified.

M&L for complete removal of existing treatment (upto plaster surface) of old painted surfaces including 2mm thick wall care putty and applying two coats of distemper oil emulsion on surfaces of walls complete all as specified and directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finish.

M&L Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey pigment cement and pigmenst set ionted and pointed in neat cement slurry colour to match in floors .

M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of Aluminium paint over aluminium red oxide primer complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for Cement concrete Type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete

S&F Mild steel angle/flat iron/chanel framed work such as ornamental and intricate design iron gate, ladder, SWT rame, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

S&F Mild steel, plain, black sheet 1.00mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required etc complete.

-Ditto- but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete

M&L for formwork to flat rough finished sides of pillars, posts, struts, piers, columns, and complete

M&L Reinforced Cement concrete Nominal Mix, Type B1 1:2:4 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete

M&L for RCC Nominal Mix, Type B1 1:2:4 (using 20 mm grade stone aggregate) for columns, pillars, piers, posts and struts etc all as specified

M&L, 18 to 20mm thick, approved machine cut, coloured Granite, factory polished, edges rounded in in skirting/ dado laid over cement screed 10mm thick in cement mortar 1:3, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.

Rolling and consolidating formation surfaces with 8-12 ton power roller including filling in soft spots , hollows and depressions etc which occurs during rolling to required level gradient and camber etc including watering as necessary during rolling complete as speceified.

M&L Moorum / red bajri filling in berms or pavings, laid in layers n.exc 15cm thick, spred. Levelled and rammed including watering complete all as specified

M & L 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base / sub floor complete all as specified

Forming contraction (dummy) joints 65 mmx10 mm wide filled with sealing compound grade A complete.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft and loose soils.

M&L for sand filling under floors or in foundations including watering and consolidation etc spread, levelled and rammed including watering complete all as specified and directed.

M&L machine pressed precast concrete inter locking paver block with grey cement and pigment (Reflective type)in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-30 grade complete all as specified.

Removing excavated soil exc 50 m but not exc 250m away and depositing where directed at a level not exc 1.5 m from the starting point.

S&F PVC (SWR) pipe 110mm, single socketed, in any length with rubber ring joints, laid in trenches or floor complete all as specified.

Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body.

Supply and fix in repair switch piano flush type, 6 Amps 240 volts single pole one way.

M&L in repair for MCB single pole & neutral 240 volts 32Amps C curve.

Supply and fix flame proof electric switch socket and metallic plug top combination in LM-16 material rating 32 Amps 500 volts, 4 pole + earth with plug including necessary fixing arrangement & all outgoing electric connection complete all as specified and directed..