Construction of Office cum Veterinary Health Care Unit for Cattle sanctuary at Handa Kundi, Nalagarh, Distt. Solan (HP).

Amount

Excavation in foundations, trenches etc. in earth work in all kind of soil lift upto 1.50 Mtrs. stacking the excavated soil in all distance. Clear from the edge of the into plinths, sides of foundations etc. consolidating Nos. deposited layers by rammeing and watering and then disposing of all surplus excavated earth as directed within a all leads and lifts in all kind of soils.

Providing and laying cement concrete 1:6:12 (1cement :6sand :12 graded stone aggregate 40mm nominal size) and curring complete excluding the cost of form work in foundation and plinth

Brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1cement :6sand) Ist class bricks.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30 x 30 x 5mm so as to give a fair finish including centering,shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. In all floors and heights and removal of the same for in-situ reinforced concrete and plain concrete work in:- a) Beams, cantilevers, girders and lintels, sides of soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1mtr. in depth in all heights from floors.

b) Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm in thickness.

Providing and laying reinforced cement concrete 1 : 2 : 4 (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) reinforced concrete chajjas not exceeding 10cm thickness utpo floor two level including finishing the exposed surfaces with cement mortar 1:3 (1cement: 3 sand) to give a smooth and even surface centering/form work and curing complete excluding the cost of reinforcement.

Providing and laying reinforced cement concrete 1 : 1.5 : 3 (1cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size) proporationally by weight with 43 grade cement @400 Kg/Cum minimum M-20 grade and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in and mixing with mechanical mixer and vibrator. as per HPPWD specification with updated BIS norms. a) Suspended floor, roofs, landing and shelves and their supports balconies beams, girders, bressumers and cantilever upto all floor levels

Providing tor steel reinforcement(Fe 415/500 D as per design) for R.C.C. work including bending binding and placing in position complete upto all floor level. Tor Steel.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb lock, beed and if required angle thrashold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with spilt and tails to Nos. jamb including steel butt hinges 2.5mm and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer in-charge. a) Profile-A.

b) Profile-B

Providing brick work using common burnt clay building bricks in super structure above level upto all heights and all floor level in cement mortor 1:6 1 Cement : 6sand).in Ist class bricks.

Half brick masonary in common burnt clay building bricks in super structure in cement mortor 1:4 (1cement :4sand) Ist class bricks.

Providing and fixing panelled glazed or panelled and glazed shutter for doors,windows and clearstorey windows including black enamelled iron butt hinges with necessary screws. 40mm thick Ist class Deodar wood.

Providing and fixing wire gauge shutter using galvanised M.S.wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm for doors, windows and clearstorey windows including bright finished black enamelled iron hinges with necessary screws. 40mm thick Ist class Deodar wood.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolt and nuts screws etc. complete. 250 x 16mm.

Providing and fixing aluminium tower bolt (berrel type) anodized transparant or dyed to required shade and colour with screws etc. complete. a) 250 x 10mm size.

b) 150 x 10mm size.

Providing and fixing aluminium handles anodized transparant or dyed to reqd.colour and shade with necessary screws etc. complete. 125mm. Nominal size

Providing and fixing bright finished hard drawn hooks and eyes.250mm.

Providing and fixing bright finished hydraulic door spring of approved make.

6mm cement plaster to ceiling with cement mortor 1:4 (1cement :4sand).

15mm cement plaster in single coat on fair side of brick/ stone/concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girthand finished even and smooth in cement mortor 1:6(1cement :6sand).

15mm cement plaster in single coat on rough side of brick/ stone/concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girthand finished even and smooth in cement mortor 1:6(1cement :6sand).

20mm cement concrete topping 1:2 to 3 (1cement: 2 to 3 stone aggregate of size 4.75mm & below, by volume) laid over & finishing momolithuic with base concrete.

Kota stone slab flooring 20mm (average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 25mm thick.

Kota stone slab 25mm thick in riser of steps, skiting dado and pillars lain on 12mm (average) thick cement mortar 1:3(1cement :3sand) and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and polishing complete.

Providing & fixing 10mm thick antiskid water proof stain & impect resistent heavy duty vetryfied tiles Nitco or equivalent 600x600mm x10mm manufactured of aprooved shade and colour in flooring, treads of steps & landings laid over 12mm thick cement mortar 1:3 (1cement :3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete

Prov.and laying spartic ceremic tiles 5.5 mm thick in flooring (300 X 300 mm.size) treads of steps laid on a bed of 12 mm thick cement mortar 1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement.

White / coloured glazed tiles 6mm thick in skirting rises of steps and dado 12mm thick cement mortar 1:3 (1cement :3sand) and jointed with cement slurry.

Cemente Concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement. 50 mm thick.

Providing and fixing plastic strips in joints of terrazzo floors.

Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square bars with round headed bolts and nuts or by screws. Plain grill.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand papered complete with ready mixed pirming paint brushing red lead, red-oxide/zinc oxide chrome.

Painting two coats(excluding priming coat) over new steel and other metal surface either enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Enamle white paint other than white.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matterready mixed paint brushing with white lead for priming.

Painting two coat (excluding priming coat) on new painted wood and wood based surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. with ready mixed paint other than white.

Cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1cement: 3 sand) finishing with a floating coat of neat cement including rounding of junction with floor. (a) 15 mm thick.

Applying birla white wall care putty over plaster surface after throughly brushing the surface free from mortat drops, dust, loose material and other foreign matters sand appered smooth to give final matter finish to the surface complete.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade after thoroughly brushing the surface cleaning of all grease, dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth.

Finishing wall with weather proo exterior grade emulsion of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Painting top of roofs with bitumen of approved quality at 17kg. for 10sqm. Impregnated with a coat of sand at 0.06cum per 10 sqm. Including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete withresidual type petroleum bitumen of penetration 80/100 grade.

Grading of roof for water treatment with 1:2:4 (1cement:2 sand:4graded stone aggregate 20mm nominal size).

Making Khurras 45 x 45cm with average minimum thickness of 5cm cement concrete 1:2:4(1cement: 2 sand : 4 graded stone aggregate 20mm nominal size) finished with 12mm cement plaster 1:3 (1cement: 3 sand) and coat of neat cement rounding the outlet complete.

Providing gola in lime concrete with 25mm nominal size stone/brick aggregate and 50% of lime mortar 1:2 (1lime putty :2 surkhi) under the drip course and finished with lime plaster 1:2 (1 lime : 2 surkhi) complete.

Providing and fixing wall face PVC (D-plast) rain water pipes of working pressure not less than 4.5 Kg/Sqm. including filling the joints with approved adhesive complete. 100mm dia pipes.

Providing and fixing MS holder bat clamps of approved design to CI or SCI pipes embedded in and including cement concrete blocks 10x10x10cms.of 1:2:4(1cement: 2sand:4graded stone agg.20mm nominal size) and cost of cutting holesv and making good the wall etc.100mm diameter.

Providing and fixing wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete. (a) PVC plain bend 100mm dia pipes.

Providing plinth protectin 50mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone aggregate )Under layer 75mm thick (un-consolidated)bed of dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including prepaaation of ground. as per instruction of Engineer-in-charge.

constructing course rubber hammer dressed U shape open surface drains with side wall 15x22 cm in cement mortar 1:6( 1 cement : 6 sand ) and inside plastering with cement plaster 1 : 3 ( 1 cement : 3 sand ) including earth work and laying 10cm cement concrete in 1 : 5 : 10 ( 1 cement : 5 sand :10 graded stone aggregate ) of 40mm nominal size) and 7.5 cm cement concrete 1 : 2 :4 ( 1 cement : 2 sand :4 graded stone aggregate ) of 20mm nominal size) and finished with a floating coat of neat cement complete as per standered design.

Excavation in drains & channels etc. in earth work in all kind of soil including dressing of side and and bed and disposing of surplus excavated earth upto all leads and lifts in all kind of soil disposed earth to be levelled and neatly dressed.

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fitting (earth work in trenches to be measured and paid for separately) a) 15mm nominal bore. Minium weight 1.22kg. Per running mtr.

Providing and fixing wall , ceiling and floor galvanised mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling and floors.a) 15mm nominal bore.minium weight 1.22kg. Per running mtr.

(b) 20mm nominal bore.minium weight 1.57kg. Per running mtr.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete (a) 110mm dia.

b) 150mm dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. 100mm nominal dia.

Providing and fixing PVC double equal branch with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete 110mm dia.

Providing and fixing PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors. 100mm nominal dia.

Providing and fixing PVC P or S trap for water closet (squatting pan) ISI marked including jointing the trap with the pan PVC pipes with approved adhesive etc. complete. (i) 110mm dia.

Providing and fixing viterious china wash down water closet (european type W.C.pan) with integral P or S trap including jointing the trap with soil pipes in cement mortar 1:1 (1cement :1sand) (seat and cover to be measured and paid for separately). Anglo Indian (Universal Closet) confirming to IS code 2556 Part-I and part-II only

Providing and fixing PTMT Coloured/ white high density polyethylene/ poly propylene 10 ltrs. Capacity (full flush) European atandard control low level flushing cistern with fittings with a pair of brackets with fitting such as lead valve, syphon, 15mm nomonal size PVC ball valve with polythene float, with push button, coiplings for connection with inlet, outlet and over flow pipe, 40 mm dia CP flish bend i/c cutting holes in walls and making good the same and connecting the flish bend with cistern and closet (overflow pipe to be measured and paid for separately.

Providing and fixing viterous china wash basin with single hole for pillar tap with C.I or M.S. brackets painted white including cutting holes and making good the same but excluding fittings. Flat Back 630mm x 450mm.

Providing and fixing laboratory sink with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fitting. (a) Vitreous China (i) 600mm x 450mm x 250mm.

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers of standard quality.

Providing and fixing C.P.Brass Towell rail complete with C.P.Brass brackets fixed to wooden plugs with C.P.brass. 600mm x 20mm.

Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P.Brass screws.

Providing and fixing brass stop cock. 15mm dia.

Providing and fixing C.P.brass Pillar tap with capaston head. 15mm dia.

Providing and fixing C.P.Brass bib tap with capstan head. 15mm dia,

Providing and fixing P.V.C. Connection pipe with brass unions. 45cm length.15mm nominal bore.

Providing and fixing M.I. unions for wash basin or sink. 32mm dia.

Providing and fixing brass full way valve with wheel. (i) 15mm nominal size.

Providing and fixing 100mm sand cast iron grating for gully floor or nahani traps.

Providing and fixing cast iron holder bat clamps including steel bolts to sand cast iron/cst (spun) iron pipes embedded in and includiing cement concrete blocks 100 x100 x100 mm of 1:2:4 mix including cost of cutting holes and making good the wall. 100mm dia.

Providing and fixing PVC cowl. 100mm nominal size.

Providing and fixing CP Brass waste for wash basin or sink. 32mm dia.

Providing and fixing jet for W.C. seat complete in all respects.

Providing and fixing PVC water storage tank. Of ISI :12701 marked G.I. inlet and outlet connectioins 15mm nominal bre ball valve and mosquito proof PVC cover with locking arrangements including hoisting upto all heights above ground level. (a) 1000 ltrs. net capacity tank.

Providing and fixing plastic seat and cover for wash down water closet with CP brass hinges and rubber buffers. (a) white plastic seat and cover.

Constructing manhole with R.C.C. top slab in 1:2:4 (1cement:2sand:4grade stone aggregate 20mm nominal size) foundation concrete 1:4;8 (1cement: 4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand)finished with floating coat of neat cement and making channels ion cement concrete 1:2:4 (1cement :2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete I/c curing complete and testing. (a) Inside size 800x800mm and 500mm. Deep including R.C.C. cover and frame medium duty 455mm x 610mm internal dia with 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1cement :3sand).complete.

b) Inside size 1200 x 900mm and 1.00 mtr. Deep including R.C.C. cover and frame medium duty 560mm internal dia with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement :3sand).complete.

BALRAJ SINGH GOVT CONTRACTOR