SPECIAL REPAIRS TO BUILDING NO. ET-298 AT CHANGSARI AND OTHER SANCTIONED WORKS AT RANGIA AND CHANGSARI MILITARY STATION UNDER GE RANGIA

Amount

Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position complete all as specified and as directed by Engineer-in-charge.

M&L for 2nd class hardwood in scantling wrought timber unframed and fixed complete all as specified and as directed by Engineer-in-charge.

S&F Mild steel work in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar works complete all as specified and as directed by Engineer-in-charge.

M&L for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.

M&L for G.I. Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work or one side of lathing in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 10 mm thick on other than fair faces of brick work or on other side of lathing in cement mortar 1:6 , surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section complete all as specified and as directed by Engineer-in-charge.

S&F second class hard wood plain wrought fillets square, rectangular or triangular in section, bull nosed splayed chamfered or rounded on one edge or face sectional area exceeding 3 and not exceeding 6 Sqcm fixed with screws complete all as specified and as directed by Engineer-in-charge.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation etc) of any thickness, including cover fillets complete all as specified and as directed by Engineer-in-charge.

M&L 4 mm thick Asbestos Cement Plain building boards, fixed to timber/ Aluminium frame work with screws in ceilings and applying two coat of white wash complete all as specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surface and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls including primer complete all as specified and as directed by Engineer-in-charge.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of newly untreated wood or wood base surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings etc. complete all as specified and as directed by Engineer-in-charge.

S&F for 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with self tapping screws or J hooks complete all as specified and as directed by Engineer-in-charge.

S&F 0.8 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed by Engineer-in-charge.

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in footpath / hardstanding / pavings / plinth protections, finished even and smooth using extra cement incl spike rolling to making impression of expended metal, while the concrete is green complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-charge.

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., without sash bars, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with (stiles and rails 80mm,muntins 60mm & glazing bars 45mm wide) as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and as directed by Engineer-in-charge.

S&F 35 mm thick second class hardwood kiln seasoned and chemically pressure treated plain framed panelled shutter (Two panel) with lock rail and panel of 10 mm bison panel as specified in SSR part I section & clause 8.24 (a) complete all as specified and as directed by Engineer-in-charge.

S&F 3 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads complete all as specified and as directed by Engineer-in-charge.

S&F stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and as directed by Engineer-in-charge.

S&F 75 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge.

S&F 75 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.

S&F 100 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed by Engineer-in-charge.

S&F 75 mm long extruded Aluminium alloy anodised butt hinges with galvanized mild steel hinge pin type C-21 complete all as specified and as directed by Engineer-in-charge.

S&F 100 mm long extruded Aluminium alloy anodised butt hinges with galvanized mild steel hinge pin type C-21 complete all as specified and as directed by Engineer-in-charge.

Dismantling of galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc complete all as specified and as directed by Engineer-in-charge.

S&F galvanised, corrugated mild steel 0.8mm sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed by Engineer-in-charge.

Fixing only of galvanised, corrugated mild steel 0.8mm sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed by Engineer-in-charge.

M&L for 4 mm thick Non-asbestos fibre cement designer E- board ceiling of size (596x596) mm fixed in GI frame (snapgrid) of standerd section as per manufacturers instructions with the 3mm thick GI suspender in ceiling and applying one coat of distemper oil emulsion including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge.

S&F coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and as directed by Engineer-in-charge.

M&L 35 mm thick second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of member (Bottom 250mm, stiles 100mm, top 120mm & lock rail 160mm wide) as specified in SSR part I section & clause 8.24 (a) complete all as specified and as directed by Engineer-in-charge.

S&F 125 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge.

M&L for precast coloured cement concrete chequered tiles (300x300x25) mm thick set jointed and pointed in with grey cement and pigment laid over and including 15mm thick screed bed in CM (1:6) in flooring complete all as specified and as directed by Engineer-in-charge.

Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.

Demolition of reed lathing single or double including battens and plaster or chicken wire lathing complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick wall of any description, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed by Engineer-in-charge.

M&L rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6 to be finished fair & even without using extra cement complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge.

M&L 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in floor, finished even and smooth using extra cement complete all as specified and as directed by Engineer-in-charge.

S&F 38 mm glass dividing strip 3 mm thick and inserted in position conform to design complete all as specified and as directed by Engineer-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars of 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engineer-in-charge.

M&L precast cement concrete 1:2:4, type B1 (Using 20 mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.

S&F second class hard wood plain fillets in rectangular or triangular in section, clean swan secured with screws or beads having sectional area exc.13sqcm but not exc. 25 sqcm complete all as specified and as directed by Engineer-in-charge.

S&F second class hard wood plain fillets in rectangular tringular in section of sectional area exc. 6sqcm but not exc.13 sqcm complete all as specified and as directed by Engineer-in-charge.

Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and as directed by Engineer-in-charge.

S&F 50 mm thick second class hard wood boarding with butt joints clean sawn fixed with nails in any situation (except flooring and skirting) complete all as specified and as directed by Engineer-in-charge.

S&F 20 mm thick planed both sides second class hard wood boarding with butt joints clean sawn fixed with nails in any situation (except flooring and skirting) complete all as specified and as directed by Engineer-in-charge.

S&F Gl frame work for seamless false ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and grid of GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed by Engineer-in-charge.

S&F pre-painted gavalume aluminium zinc coating GI based corrugated/semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as per specified and as directed by Engineer-in-charge.

S&F pre-painted gavalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as per specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4, complete all as per specified and as directed by Engineer-in-charge.

M&L glazed ceramic tiles (coloured) of size 300x600x6 mm thick on vertical surfaces such as dados, skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing 10 mm thick in CM 1:4 complete all as per specified and as directed by Engineer-in-charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick over 15 mm thick CM(1:6) screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as per specified and as directed by Engineer-in-charge.

M&L for 30 mm thick 2nd class hard wood, plain, framed paneled shutters (any number of panels) with panels of timber flat on both side (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers etc complete all as per specified and as directed by Engineer-in-charge.

S&F butt hinges 100 mm long medium weight, cold rolled mild steel complete all as per specified and as directed by Engineer-in-charge.

S&F butt hinges 75 mm long medium weight, cold rolled mild steel complete all as per specified and as directed by Engineer-in-charge.

S&F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as per specified and as directed by Engineer-in-charge.

S&F 15 mm bore Galvanized Steel tubes, medium grade, with all fittings complete all as per specified and as directed by Engineer-in-charge.

S&F 20 mm bore Galvanized Steel tubes, medium grade, with all fittings complete all as per specified and as directed by Engineer-in-charge.

S&F bib tap 15mm bore cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron plate or for brass ferrule complete all as per specified and as directed by Engineer-in-charge.

S&F 15mm bore pillar tap, fancy type, cast copper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge.

S&F Vitreous China Ware Wash hand basin white, flat back of size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description not other wise described of over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of old or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm girth or width and applying one coat of synthetic enamel paint over a coat of pink primer complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing old plastered surfaces of walls and applying one coat of white wash complete all as per specified and as directed by Engineer-in-charge.

M&L for PCC (1:3:6) type-C2 with using 40 mm graded crushed stone aggregate as in surface channel and drains including necessary form work complete all as per specified and as directed by Engineer-in-charge.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as per specified and as directed by Engineer-in-charge.

M&L for add or deduct for each 25 mm girth or part there of over or under 30 cm inner girth of drain or channel complete all as per specified and as directed by Engineer-in-charge.

M&L for ATT at points of contract of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as per specified and as directed by Engineer-in-charge.

M&L for Brickwork with sub- class ‘B’ bricks in CM 1:6 straight or curved on plan exc. 6 m mean radius complete all as per specified and as directed by Engineer-in-charge.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as per specified and as directed by Engineer-in-charge.

M&L for machine cut granite slab 20mm thick of approved colour and shade as in floors, skirting/ dado etc over and including 15mm thick backing coat in CM 1:4, laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as per specified and as directed by Engineer-in-charge.

S&F in repair stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as per specified and as directed by Engineer-in-charge.

S&F 15 mm bore fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as per specified and as directed by Engineer-in-charge.

S&F 75 mm PVC SWR pipe single socketed, in any length with rubber ring joint, laid in trenches or floor, wall etc. complete all as specified and as directed by Engineer-in-charge.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge.

S&F solid PVC door frame of size 50x47mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS square tube complete all as specified and as directed by Engineer-in-charge.

S&F factory made solid PVC moulded door shutter (with wood free EPS) 28-30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded prelam sheet the front face and 2 mm prelam PVC sheet on back face complete all as specified and as directed by Engineer-in-charge.

S&F solid PVC wall linning consisting of 5 mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site in any position complete all as specified and as directed by Engineer-in-charge.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge.

S&F aluminium handle cast type anodised 150mm size complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old painted surfaces of wood and wood based materials over 10 cm width or girth of any description, not otherwise described and applying one coat of varnishing including wood filler complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15mm bore stop cock CP screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15mm bore pillar tap fancy type cast copper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15mm bore bib cock with wall flange copper alloy screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore brass CP mixer for mixing hot & cold water (Exposed Straight legs) with telephonic shower arrangement & Crutch (without hand shower and hoses) arrangement screwed down for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F in repair CP health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish complete all as specified and as directed by Engineer-in-charge.

S&F in repair chromium plated tubular towel rail, 15 mm dia D-type 60 cm long between flanges complete all as specified and as directed by Engineer-in-charge.

S&F in repair CP towel ring square complete all as specified and as directed by Engineer-in-charge.

S&F in repair brass chromium plated towel rack 600 mm long between flanges & 225 mm wide with lower hanger complete all as specified and as directed by Engineer-in-charge.

S&F in repair soap dish holder fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in-charge.

S&F in repair corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 45 cm long complete all as specified and as directed by Engineer-in-charge.

S&F in repair vitreous china wall hung wash basin white, size 200x550x400 mm excluding taps, waste but including brakets with pedestal complete all as specified and as directed by Engineer-in-charge.

S&F in repair CP toilet paper roll holder with flap including all necessary fittings complete all as specified and as directed by Engineer-in-charge.

S&F in repair of viterious china wash down water couple closet size 760x360x635 mm including seat cover complete all as specified and as directed by Engineer-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as per specified and as directed by Engineer-in-charge.

Removing excavated material exc. 250 m but not exc. 500 m & depositing where directed at a level not exc. 1.5 m complete all as specified and as directed by Engineer-in-Charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as per specified and as directed by Engineer-in-charge.

M&L cement concrete with PCC type C 2 1:3:6 using 40mm graded aggregate as in foundation, mass concrete complete all as per specified and as directed by Engineer-in-charge.

M&L for 100mm thick PCC type C-2 1:3:6 using (40mm gradded aggregate) as in sub base complete all as per specified and as directed by Engineer-in-charge.

M&L for 100mm thick PCC type B-2 1:2:4 using (40mm gradded aggregate) as in sub base complete all as per specified and as directed by Engineer-in-charge.

M&L for forming 12mm thick Expansion joints for 100mm thick PCC filled with pre-formed bituminious filler & top 30mm primed & sealed with sealing compound Grade A complete all as per specified and as directed by Engineer-in-charge.

M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as per specified and as directed by Engineer-in-charge.

S&F plates (plain or chequed) channels, square cut or notched (ordinary & counter sunk) with riveted, bolted or welded attachment conforming to grade Fe-410 complete all as per specified and as directed by Engineer-in-charge.

M&L MS rolled section of grade Fe-410-0 or Fe-310-0 (beam, tee, angle channel ot flat section) as in roof trusses (framed), trussed purlins, crane gantries rails, and fastening and heavy bracket framing including destance pieces, wind tie, cleats etc. complete all as per specified and as directed by Engineer-in-charge.

M&L preparation of new steel surfaces of any description over 10cm in width or grith and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as per specified and as directed by Engineer-in-charge.

Taking down carefully aluminum/copper point wiring (light, fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators and removing all removed fittings and fixtures with wiring cable, battons, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceiling etc all complete all as per specified and as directed by Engineer-in-charge.

Taking down carefully U/S main switches and DB’s including wooden bds and removing from site incl making good disturbed surfaces of walls all complete all as per specified and as directed by Engineer-in-charge.

Dismantling of house service brackets of any size and type and making good the distrubed wall surfaces complete all as per specified and as directed by Engineer-in-charge.

M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends, elbow, crosses and PVC rectangular block with 3mm thick plastic laminated sheet cover as directed for mounting fittings etc like switches, sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded copper conductor cable as earth continuity conductor and connected to earth dolly for one light point controlled by one switch complete all as per specified and as directed by Engineer-in-charge.

M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends, elbow, crosses and PVC rectangular block with 3mm thick plastic laminated sheet cover as directed for mounting fittings etc like switches, sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded copper conductor cable as earth continuity conductor and connected to earth dolly for one ceiling fan or exhaust fan point controlled by one switch complete all as per specified and as directed by Engineer-in-charge.

All as per serial item no. 125 above but for 3 pin socket combination 5 Amps on independent board.

All as per serial item no. 125 above but for 3 pin 5 amp socket 5 Amps on same board.

All as per serial item no. 125 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 6 pin 15 A socket outlet on independent boards .

Supply and fix switch piano type 5 Amp single pole one way complete all as specified and as directed by Engineer-in-charge.

S&F socket outlet 2in1, 3 Pin, 5 AMP flush type, complete all as specified and as directed by Engineer-in-charge.

S&F switch socket combination 3 pin, 05 Amps flush type complete all as specified and as directed by Engineer-in-charge.

S&F switch socket combination 5 pin, 05/16 Amps flush type with neon indicator complete all as specified and as directed by Engineer-in-charge.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd including necessary electric connection complete all as specified and as directed by Engineer-in-charge.

Supply and fix ceiling rose surface backelite three terminal complete all as specified and as directed by Engineer-in-charge.

S&F LED tube light fitting, Wall mounted, extruded head dissipation & integrated with crystal glass LED tube (double side connection) 20 W LED (4ft), 230V, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed by Engineer-in-charge.

S&F PVC rectangular block for mounting, DBs, etc. with 3mm thick plastic laminated sheet cover of size 300x300x50 mm deep complete all as specified and as directed by Engineer-in-charge.

S&F single pole & neutral 8 way DB with double door, complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SPN 240 Volts 40 Amps breaking capacity 10 KA rating complete all as specified and as directed by Engineer-in-charge.

Supply and fix MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and as directed by Engineer-in-charge.

S&F 1100 volts grade heavy duty cable PVC insulated and sheathed aluminum conductor in service connections suspended by insulating hangers not more than 1 Mtr apart including 4 mm suspension wire one twin core cable flat or circular of 16 Sqmm size with multistranded conductor including taking down old unserviceable existing cable complete all as specified and as directed by Engineer-in-charge.

Taking down old ceiling fan/exhaust fan and refixing only serviceable fans after testing to its original position/location and handing over old unserviceable ceiling/exhaust fans to MES store yard complete all as specified and as directed by Engineer-in-charge.

S&F 10 Watt bulk head fitting, environmental friendly, ultra modern, energy saving, surface mounted, decorative back-lit LED luminaire comprising of high brightness LEDs, IP66, complete all as specified and as directed by Engineer-in-charge.

Supply and fix lamp holder, PVC/Polycarbonate type with back plate including 10 watt LED bulb complete all as specified and as directed by Engineer-in-charge.

S&F House service bracket(Hook type) complete with 3.0m long G.I pipe 40mm dia medium grade, two nos.90 degree bends, M.S hook and stay or guy complete all as specified and as directed by Engineer-in-charge.

M&L for earthing with Galvanised Iron Earth Plate Electrode 600X600X6mm size buried directly in Ground vertically at a depth not less than 2.25 METRE below Ground Level with the Top Edge of Earth Plate at a depth not less than 1.50 METRE below Ground Level connected to Galvinased earth lead wire 4.0mm dia by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Steel, Earth Plate Electrode surrounded by a packed thickness of Char Coal or Coke Dust mixed with common Salt in alternate layers not exc. 150mm thick including Galvanised Iron Pipe 25mm Bore (dia) Light Grade, upto test points above the Floor Level of the Building situated including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Agg-regate) and RCC Cover of size 540X540X50 mm in RCC 1:2:4 (20mm Graded Stone Aggregate) einforced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge.

S&F 34 watt recess mounted high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section complete all as specified and as directed by Engineer-in-charge.

S&F single pole & neutral 12 way DB with double door, complete all as specified and as directed by Engineer-in-charge.

S&F exhaust fan of sweep area: 300 MM ; Noise level: (40 - 45) dB; with bird guard to protect the fan in running condition, powder coated metallic finish having Sturdy steel bird guard with specially designed metal blade complete all as specified and as directed by Engineer-in-charge.

Taking down and refixing old existing ceiling fan of 1200/1400 mm sweep including painting of ceiling fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm size complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc. with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete all as specified and as directed by Engineer-in-charge.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm size complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc. with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one ceiling fan or exhaust fan point controlled by one switch complete all as specified and as directed by Engineer-in-charge.

All as per serial item no. 151 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 3 pin 15 A socket outlet on independent boards .

All as per serial item no. 151 above but for 3 pin 5 amp socket on same board.

All as per serial item no. 151 above but for 3 pin 5 amp socket on independent board.

Supply and fix MCB SPN 240 Volts 63 Amps breaking capacity 10 KA rating complete all as specified and as directed by Engineer-in-charge.

S&F 36 watt recess mounted high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section complete all as specified and as directed by Engineer-in-charge.

S&F LED batten 4' with wide angle profile high lumen batten suitable for 20 Watt LED tube complete all as specified and as directed by Engineer-in-charge.

Supply and fix LED tube 20 W with single side connection suitable to fix in LED baten of 20 Watt complete all as specified and as directed by Engineer-in-charge.

Supply and fix LED tube light, 2ft long, 10 Watt, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and as directed by Engineer-in-charge.

Supply and lay earth continuity conductor or main GI earthing lead fixed to wall on batten or recces or chasses or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of 4mm dia galvanised iron or steel wire complete all as specified and as directed by Engineer-in-charge.

S&F PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified and as directed by Engineer-in-charge.

S&F post top lantern new generation, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminum landscape luminaire with high power LEDs as light source of capacity 35 W complete all as specified and as directed by Engineer-in-charge.

S&F 8 Watt landscape light of cone series act as a imposing street furniture, with diffuser at the upper portion suitable for garden light in landscape environment complete all as specified and as directed by Engineer-in-charge.

S&F exhaust fan of sweep 225 MM ; Noise level: (40 - 45) dB; with bird guard to protect the fan in running condition, Powder coated metallic finish having Sturdy steel bird guard with specially designed metal blade complete all as specified and as directed by Engineer-in-charge.

S&F 30 W LED flood light luminaire, energy saving, environmental friendly long life, exclusive innovative die cast aluminum, suitable for highlighting architectural façade and general purpose lighting complete all as specified and as directed by Engineer-in-charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sqmm nominal cross section in service connections of 2 core cable including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge.

S&F MCB DB 2 way where MCB to be used of size 2 way with bus bar ,of capacty 15 A, Sheet Steel, Powder Painted MCB DBs with Din Rail (In accordance with IS 13032, IS 8623, IEC/BS EN 60439-3) complete all as specified and as directed by Engineer-in-charge.

Supply and fix PVC exhaust fan, single phase, 230 V and 250 mm dia complete including cutting of hole on wall for fixing and finishing of wall surfaces with the existing and colour wash/white wash etc, complete all as specified and as directed by Engineer-in-charge.

Supply and fix heavy duty wall mounted fan swing type AC 230/240 volt single phase of 300 mm sweep of approved colour, ISI marked complete all as specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

OM CONSTRUCTIONS

M/S S.S. Construction

RAJKAMAL ENTERPRISE

M/S MD ABDUL RAHMAT