SPECIAL REPAIR TO SMQS BLOCK NO. 274 AND 419 AT PHASE III AREA AT AF STN BAGDOGRA UNDER GE AF BAGDOGRA

Amount

Dismantling AC corrugated or semi corrugated sheets including ridges as in roof and segregating serviceable sheet for reuse and removing unserviceble from site complete all as specified.

Dismantling plain or corrugated steel sheeting any gauge, thickness including ridges as in roof and segregating serviceable sheet for reuse and removing unserviceble from site complete all as specified.

S& F pre-painted galvalume aluminium zinc coating GI based corrugated or semi corrugated steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws all as specified.

S& F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mps as in roof ridge, covering/cladding to wall fixed with self tapping screws or "J" hook all as specified.

Dismantling of mild steel work of any discription not otherwise provided for.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Fe-290 (Gde-E-165)

S&F framed work such as grills, gratings, etc.. With ends of bars shouldered and/or rivetd or forged into spikes. guard bars, barbed iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe.290 Gde-E 165.

Dismantling of old decayed timber scantling 40 sq cm and over in section in any position in framed work.

M&L for for 2nd class hard wood in scantling wrought on sides frammed complete all as specified.

Dismantling wall and ceiling boards (fibre,pulp,insulation etc) or insulation boards/slabs etc any thickness including cover fillets completeall as specified.

S&F for aluminiumm anodised snap grid size 605x605mm frame work for false ceiling consisting of main Tee (36.5x25x1.4) mm Wt @ 0.24 Kg /RM Secondary (cross) Tee (23.5x26.4x1.4) mm Wt 0.1291 Kg/RM and wall aluminium angle (36.5x23.5x1.4) mm Wt 0.22 Kg/RM suspended with 4mm dia GI wire hanger fixed with steel dash fastners or from purline or roof with butterfly clips etc complete all as specified.

M&L 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted as in ceiling to timber/GI/Aluminium framework with screws including two coats of white wash complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed.

M&L 10mm thick rendering cement mortar (1:3) on ceiling , chajja or concrete surfaces upto 10mtr height and necessary form work, finished the surfaces even and fair without using extra cement complete all as specified.

M&L for preparation of surfaces and applying 1.5mm thick wall care putty to newly plastered surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment of surfaces and applying 1.5mm thick wall cara putty to old plastered surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of newly plastered cement concrete surfaces on ceiling of roof of buildings and applying three coat of white wash on roof ceiling etc complete all as specified.

M&L for preparation of old decorated cement concrete surfaces on ceiling of roof of buildings and applying two coat of white wash on roof ceiling etc complete all as specified.

M&L for preparation of external surfaces walls of buildings and Preparation of newly plastered external surface& applying two coat of cement base paint over one coat of primer on wall/roof complete all as specified.

M&L for preparation of old decorated external surfaces walls of buildings and applying two coat of cement base paint on wall/roof complete all as specified.

Dismantling floor, hearth or wall tilling, stone slab etc including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles 200x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed .

Demolition of stone slab and tiles of any description laid, bedded and pointed in any mortar or thickness in floors apron etc.

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types incl 15mm thick screed bed in CM 1:6.

M&L machine cut Kota stone slab 20 to 25mm thick as in flooring over screed bed 15mm thick in CM 1:6 laid & jointed with cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

M&L machine cut Kota stone slab 20 to 25mm thick as in riser of steps, skirting, dado and pillar laid over cement 10mm thick cement rendering in CM 1:4 and jointed with ditto cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exe. 15cm thickness (below or above ground level).

M&L 25 mm thick PCC 1:2:4 type B1 (20mm graded aggregate) as in sub base of floors etc complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile 0.16 Sqm over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 10mm thick rendering in Cement mortar (1:4) in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Taking down chowkats or frame with shutters any description (without taing off shutters from the frame) exc. 1.5 Sqm and n.exc.4 Sqm each

Taking down chowkats or frame with shutters any description (without taking off shutters from the frame) area n.exc. 1.5 Sqm each

Taking down of shutter of any description exc. 1 Sqm and n.exc.2 Sqm each

Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethene painted on the front face & 2mm plain colour PVC sheet on back face.

Solid PVC door frame of size 90mm x 45mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing

Solid PVC door frame of size 60mm x 30mm made out of 5mm plain colour PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Factory made solid wire gauzed door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wire gauzed for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 100mm long or suitable size MS screws including make good surface to match existing surface,complete Make : Raj shree or equivalent

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face complete all as specified.

S&F for MS butt hinges, 100 mm medium weight, cold rolled approved make .

S&F for MS butt hinges, 75 mm medium weight, cold rolled approved make.

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and staples.

S&F aluminium alloy handle 125 mm cast type anodised all as specified.

S&F aluminium alloy handle 150 mm cast type anodised all as specified.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 200 mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 125mm hasp and staple, aluminium anodised bolt to hinge plate and fixed with screws.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete

S&F 150mm overall length of cover plate door stoper aluminium alloy body and toungue anodised complete

M&L for painting to old decorarted wood surface of any description not otherwise descsribed over 10 mm width or girth with one coat of synthetic enamel paint over a coat of pink primer.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded

All as per item No 55.00 above but without glazing bars

S&F steel ventilator with top hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded

M&L for painting to steel surface of any description not otherwise descsribed over 10 mm width or girth with two coats of synthetic enamel paint over a coat of zink primer.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm dia and fixed with tinned tacks of galvanized wire staples

S & F in repair white vitreous china squatting pan "Orissa pattern" long pan of size 580 x 440 mm with and including 100mm bore 'P' or 'S' trap and integral foot rest and PCC 1:5:10 type E-2 all as specified.

S&F in repair PVC flushing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.

S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including CP waste coupling and 32mm PVC waste pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed.

S&F in repair PVC jet fixed to water closet pedestal pattern complete all as specified and directed.

S&F in repair, brass CP angle cock 15mm dia single way and fixed complete all as specified and directed.

S&F in repair brass CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed.

S&F in repair pillar tap brass CP 15mm bore fancy type for iron pipe complete all as specified and directed.

S&F in repair concealed stop valve brass CP 15mm bore fancy type screwed both end for iron pipe complete all as specified and directed.

S&F in repair swivel shower of PTMT with arm 15mm size 195mm long bend of 45 degree fixed in 15mm bore of pipe complete all as specified and directed.

S&F in repair 100mm dia PTMT gratingcomplete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut at both ends with washer, 600mm long and fixed complete all as specified and directed.

S&F in repair for CP toilet paper holder fixed to wall with CP brass screws complete all as specified and directed.

S&F in repair for sheet glass assembly fancy type 450mm long and 125mm wide with CP double railing and fixed with brass screw complete all as specified and directed.

S&F in repair CP towel Rail 600mm long "D" type 20mm dia complete all as specified and directed.

S&F in repair CP soap dish fixed to wall with screw complete all as specified and directed.

S&F in repair PVC water storage tank cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including removing from site complete all as specified and directed.

S&F in repair 20mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed.

S&F 15mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/Sq cm fixed to wall or ceiling or laid in floors etc complete all as specified.

S&F 20mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/Sq cm fixed to wall or ceiling or laid in floors etc complete all as specified.

Refixing of old 15mm dia bore GI tubing obtained from taking down connection in new or old postion fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

Refixing of old 20mm dia bore GI tubing obtained from taking down connection in new or old postion fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone agg as in hold fast and chowkat fillings, blocks etc complete all as specified.

Resecuring or easing & adjusting, including taking down Shutters and refixing same opening of any description exc. 1 sqm and n exc 2 sqm each including necessury fitings complete all as directed

M&L 50mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection, laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified

Removing existing water proofing/blace top treatment (including concrete padding)roughening of concrete srfaces, cleaning and washng down the surfaces with water and removing debris/rubbish materials out side MD land complete all as secified and as directed.

M&L for 50 mm average thick pading with plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate finished even & smooth without using extra cement.

M&L for water proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS -3384 @0.30 litre/Sqm, by lying actetic polypropylene (APP) modified membrane pre fabricated, reinforced with non woven polyester, of 3.0 Kg/Sqm(minimum) 3mm thick with minium 75 mm side overlaps and minimum 100mm and applying one coat of bituminious aluminium paint over APP memberane all as specified.

S&F in repair Cast Iron slotted vent cowls 75mm bore and fixed complete all as specified and directed.

S&Fin repair CI bends 75mm bore (any radius) with duck's foot or heel rest and fixed complete all as specified and directed.

S&F in repair CI branch piece 75mm dia, single (equal or unequal), ordinary or inverted (spigot or socket) or with parallel branches and fixed in position complete all as specified and directed.

S&F in repair 75mm dia CI pipe soil, waste and vent pipe in any length with or without ears with cement joints, laid in trenches or fixed to wall including necessary clamps complete all as specified and directed.

S&F in repair 100mm dia CI pipe soil, waste and vent pipe in any length with or without ears with cement joints, laid in trenches or fixed to wall including necessary clamps complete all as specified and directed.

S&F in repair CI floor trap 100mm dia outlet with grating including jointing to waste pipe with cement joints, fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F in repair CI bends 100mm bore (any radius) with duck's foot or heel rest and fixed in position complete all as specified and directed.

S&F in repair CI branch piece, single (equal or unequal), ordinary or inverted (spigot or socket) or with parallel branches and fixed in position complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repair drapery rod 30 mm dia Aluminum fancy type powder coated wood finish including rings, knobs and brackets complete all as specified.

M & L chequered cement concrete tiles 20cmx20cmx25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM 1:6.

S & F in repair 18/19mm pre-laminated partical board, interior grade pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screw.

Demolition of brick work/ stone masonry built in cement mortar including arches, pillars etc and excluding precast concrete article all as specified.

M&L for flyash brick work old size bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6.) etc complete all as specified and as directed.

S & F 32mm dia flush pipe of polyethylene of low or high density for low level cistern.

Demolition Concrete of any description and in any position not otherwise specifically provided for

M & L 0f Providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges, drain etc.

Demolition of reinforcement cement concrete roofs, beams, chhajja etc and similar suspended work

M & L reinforced cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in chhajja etc.

S & F mild steel TMT bar 10mm dia and over cut to length, bent to shape required inck cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild sttel wire (annealed) not less than 0.9mm dia or securing with clips.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches,Bell , bell push, DB & making good of disturb surfaces of wall/floors etc as specified & directed.

M& L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6 mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:- Note :- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. (a) One light point / one fan point controlled by one, one way swtich.

One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 114.00 above but on independent board 05 Amps switch socket combination.

All as per ser item No. 114.00 above but one light point controlled by 2 way switches.

All as per ser item No. 114.00 above but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per ser item No 114.00 above. but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

Supply and fixing of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and fixing of bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.

Supply and fixing of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.

Supply and fixing of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing of switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin ) 5/15 Amps, 230V, AC.

Supply and fix of ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

M&L for connecting up fan regulator electronic on existing phenolic laminated sheet stepped type suitable for ceiling fan 1200/1400mm sweep all as specified and directed.

Supply and fixing of bell ding dong type AC, 230 volts, single phase complete all as specified and directed.

Supply and fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fix LED tube light fitting 20watt, 4 feet, PVC extruded batten complete with retrofit T5 Polycarbonate tube with connector block, etc. complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. Make - HPL/ Crompton/ Havells/ Philips

Supply and fix LED tube light fitting 9 watt, 2 feet, PVC extruded batten complete with retrofit T5 Polycarbonate tube with connector block, etc. complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. Make - HPL/ Crompton/ Havells/ Philips.

Supply and fixing LED street light fitting 30 watt complete with powder coated die cast aluminium compact,IP 66 protection complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size Make -HPL /Bajaj/ Crompton/ Havells/ . Note : Adequate size of bracket / clamps, nut, bolts, washers, etc required at site is deem to be included in this item rate.

Taking down carefully copper/aluminium Sub main wiring completewith all connected accessories etc as specified & directed.

Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of cables and one run of continuous earting cable drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Supply and fix of distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed. Make : Indo Asian/Havells / L&T/HPL/Hager/Legrand.

Supply and Fixing of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA Make : Indo Asian/Havells / L&T/HPL/Hager/Legrand.

Supply and Fixing of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA Make : Indo Asian/Havells / L&T/HPL/Hager/Legrand.

Material & Labour in repairs of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion. Notes : (i) Earth result shall be jointly recorded and should be below '1' ohm. (ii) Earth result shall be forwarded to Engr-in-Charge for record, after completion of earthing.

Material & Labour in repairs of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

Material & Labour for hanging ceiling fan in position and re-commissioning the same including making electric connection ,painting as per existing colour paint , writing MES No with black paint complete all as specified and directed.

Material & Labour for fixing Exhaust fan in position and re-commissioning the same including making electric connection ,painting as per existing colour paint , writing MES No with black paint complete all as specified and directed.

Material and labour in repairs for MS box of size 60x45x30 cm depth, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of DB's, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealed and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box with DB's and electric meters and refixing the same DB's and electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing complete all as specified and directed. Note : (a) Any plastering work involved while taking out old UNSV meter box and refixing the new meter box is deem to be included in this rate. (b) PVC flexible conduit required within the meter boxes is deem to be included in this item rates.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC / RCC shall deemed to include the cost of form work, shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.

M/S MANAS MITRA

SREE SWAPAN KUMAR GHOSH

HALDER ENTERPRISERS

SHRI P P SHARMA

M/S SUNNY ENTERPRISE

M/s Arun Chandra Sarkar & Sons