REPAIR TO ALL TYPE OF WOODEN FURNITURE AND PAINTING AND POLISHING OF ALL TYPE OF STEEL AND WOODEN FURNITURE UNDER GE (WEST) LUCKNOW

Amount

SIDE BOARD:DRG NO 241, 26M AND 1112: (For Item No 1 to 11) Taking down U/S legs and S&F new legs of size 50x50x75mm made of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture through out shape and size and applying two coats of french polished to match existing surface complete all as specified and shown on drg.

All as item No 1 above but bottom frame of size 1060x 290x 25mm complete all as specified and shown on drg.

Taking down old unserviceable drawers and supply and fixing new drawer made of 12mm thick ply BWR ISI marked with size and shape as exists complete all as specified and as shown on drg.

Taking down old unserviceable Top and supply and fixing New top made of 18/19 mm thick prelaminated MDF Board (exterior Grade) ISI marked. Complete all as specified and as shown on drg.

Taking down U/S partition and S&F new partition of MDF board ISI marked of size 610x460mm x18mm complete all as specified and as shown on drg.

All as per item ser No. 5 but top or bottom of size 1220x455mmx18mm complete all as specified and shown on drg.

Taking down old unserviceable back ply and supply and fixing new ply of size 1220x635mm, 6mm thick commericial BWR grade ISI marked , IS-303 grade complete all as specified and as shown on drg.

All as item No 7 but side of size 645 x 455mm complete all as specified and shown on drg.

All as per item No.7 but shelf of size 425x770 complete all as specified and shown on drg.

Taking down old unserviceable knob and supply and fixing knob 40mm dia, brass, chromium plated complete all as specified and as shownon drg.

Preparation of surface with sand paper after scrubbing and French polishing to side board, excluding to the parts repaired/replaced under item No 1 to 9 to the required gloss, to match with the existing complete all as specified and as shown on drg.

BOOK CASE (FD-45(M) , 237 and 58) (For Item No 12 to 18) Taking out old back ply wood and S&F new 6mm thick plywood grade BWR and ISI marked, IS-303 grade of size 1165x735mm duly french polished to match with the existing surface complete all as specified and shown on drg.

Taking out old top and S&F new top, 1060x300x18/19mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade).

All as per item No 13 but shutter of size 802x380mm, complete all as specified and shown on drg.

Taking out old legs and S&F new legs of well seasoned shisham wood of required shape & size 100x45x45mm duly french polished to match with the existing parts complete all as specified and shown on drg.

All as per item ser No, 13 but shelves of size 735x275 mm complete all as specified and shown on drg.

Taking down old unserviceable knob and supply and fixing knob 40mm dia, brass, chromium plated complete all as specified and as shownon drg.

Preparation of sufrace with sand paper after scrubbing and French polished to book case, excluding to the parts repaired/ replaced under item No 13 to 17 to the required gloss, to match with the existing complete all as specified and as shown on drg.

TEAPOY(DRG NO FD-278) :(For Item No 19 to 24) Taking out old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified and shown on drawing.

All as per item No. 19 above but long rail complete all as specified and shown on drg.

All as item No. 19 above but short rail complete all as specified and shown on drg.

Taking out old unserviceable top and S&F new top of size 600mmx450 mmx19 mm thick prelaminated MDF board Grade I, Type -II, ISI Mark- 1514587:1998) (exterior grade). complete all as specified and shown on drg.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and shown on drg.

Preparation of surface with sand paper after scrubbing and French polishing to teapoy, with and including to the parts repaired/replaced under item No 19 to 23, to the required gloss to match with the existing complete all as specified and as shown on drg.

TABLE CENTRE (FD-274 & 29M) (For Item No 25 to 30) Taking out U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete and shown on drawing.

All as item No. 25 but long rail complete all as specified and shown on drg.

All as item No. 25 short rail complete all as specified and shown on drg.

Taking out old unserviceable top and S&F new top of size 900x450x18/19mm thick prelaminated MDF board Grade I, Type -II, ISI Mark- 1514587:1998) (exterior grade). Complete all as specified and shown on drg.

Taking down U/S stiffner & Fixing of new stiffner made of 1st class seasoned teak wood free knots and cracks with permissible moisture contents size 860mmx50mmx25MM

Preparation of surface with sand paper after scrubbing and French polishing to table centre, with and including to the parts repaired/replaced under item No 25 to 29 to the required gloss to match with the existing complete all as specified and as shown on drg.

TABLE 900X600X760MM WITH AND WITHOUT DRAWERS (FD-283 & 284): (For Item No 31 to 41) Taking down old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified and shown on drawing.

All as item No. 31 but long rail complete all as specified and shown on drg.

All as item NO. 31 but short rail complete all as specified and shown on drg.

All as item No. 31 bottom stiffner complete all as specified and shown on drg.

All as item No. 31 track rails complete all as specified and shown on drg.

All as item No. 31 side stiffner complete all as specified and shown on drg.

All as item No. 31 but drawer complete all as specified and shown on drg.

Taking out old unserviceable top and S&F new top of size 900x600x18/19mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade)

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as directed and specified.

Taking down old u/s drawers knob and S&F new drawers knob mild steel chromium plated of size 40mm complete all as specified shown on drawing.

Preparation of surface with sand paper after scrubbing and French polishing to table with or without drawers with and including to the parts repaired/replaced under item No 31 to 39 to the required gloss to match with the existing complete all as spceified and as shown on drg.

TABLE PEG DRG NO FD-277 & 25(M): (For Item No 42 to 47) Taking out unsv legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified and shown on drawing.

Same as per item ser No. 42 but long rail complete all as specified and shown on drg.

Same as per item ser No. 42 but short rail complete all as specified and shown on drg.

Taking out old unservicable top and S&F Top of table shall be made of 18/19 mm prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade).Complete all as spceified

Supply & Fixing of new stiffner made of 1st class seasoned teak wood free knots and cracks with permissible moisture contents size 400mmx50mmx25MM complete all as specified and directed.

Preparation of surfaces by sand papering and cleaning and polishing with french polish upto the required finish complete all as specified and shown on drg.

TABLE DINING 8/6 PERS DRG NO FD-273: (For Item No 48 to 56) Taking out old unserviceable top and S&F new top of size 1800x900mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade) complete all as specified and shown on drg.

Taking out old unserviceable top and S&F new top of size 1500X900mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade). Complete all as specified and shown on drg.

Taking down U/S legs and S&F legs of size 740x60x60mm front/rear left/right made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified and shown on drawing

All as per item No. 50 but legs of size 740x40x75mm complete all as specified and shown on drg.

All as per item No.48 but Top long rail of size 1800x25x100mm for table dining 8 pers complete all as specified and shown on drg.

All as per item No.48 but Top long rail of size 1500x25x100mm for table dining 6 pers complete all as specified and shown on drg.

All as per item No. 48 but Top short rails of size 640x25x100mm for table dining 6 pers complete all as specified and shown on drg.

All as per item No. 48 but short rails 900x25x100mm for table dining 8 pers complete all as specified and shown on drg.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength all as directed by Engr-in-Charge.

Preparation of surface with sand paper after scrubbing and French polishing to table dining 8/6 pers with and including to the parts repaired/replaced under item No 48 to 56 to the required gloss to match with the existing complete all as specified and shown on drg.

TABLE WRITING (Drg No FD-275): (For Item No 58 to 69) Taking out broken U/S legs S&F new legs 1st class seasoned teak wood free from knots and cracks with permissible moisture contents through out as per shape and size complete all as specified and shown on drawing.

All as per item No. 58 but drawer side rail complete all as specified and shown on drg.

All as per item No. 58 but center stiffener complete all as specified and shown on drg.

All as per item No. 58 but side stiffener complete all as specified and shown on drg.

All as per item No. 58 but top long rails complete all as specified and shown on drg.

All as per item No.58 but shutter made prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade). Complete all as specified and shown on drawing.

Taking down old drawer from the table and S&F new drawer of required size complete all as specified and shown on drawing.

All as per item ser No.64 but front side of drawer as per existing size as shown on drawing.

All as per item ser No.64 but sides of drawers and S&F new sides of 12mm plywood BWR grade ISI marked as per required size complete all as specified and directed.

Taking down bottom ply wood 6mm of drawers and S&F new ply wood 6mm BWR grade ISI Marked as per required size complete all as specified and directed.

Taking out old unserviceable top and S&F new top of size 1145x600mm x18/19mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade). Complete all as specified and shwon on drg.

Preparation of surface with sand paper after scrubbing and French polishing to table writing, with and including to the parts repaired/replaced under item No 58 to 68 to the required gloss to match with the existing complete all as specified and shown on drg.

TABLE DRESSING LADIES WITH MIRROR:( FD 378) (For Item No 70 to 81) Taking out existing old unserviceable foggi fadded looking mirror of size 1200x380mm x 5mm thick with frame and S&F new looking mirror of same size and shape make : ATUL/MODI Guard duly framed with 1st class seasoned teak wood and back of mirror complete all as specified and shown on drg.

Removal of broken glass panel and new glass pane of size 5mm thick duly slotted glass for sliding purpose complete all as specified and directed.

Taking down old unserviceable legs and S&F new leg of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size complete all as specified and shown on drawing.

All as per item No, 70 but front side of drawer complete all as specified and shown on drg.

Taking down sides of drawers and and S&F new sides of 12mm Ply wood BWR grade ISI Marked,IS-303 grade per required size complete all as specified and directed.

All as per item No, 74 but back of drawer complete all as specified and directed.

Taking down bottom ply wood 6mm of drawers and S&F new ply wood 6mm BWR grade ISI Marked,IS-303 grade as per required size complete all as specified and directed.

All as per item No, 70 but exiting table top of table dressing ladies complete all as specified and shown on drg.

All as per item No, 70 but table dressing ladies bottom complete all as specified and shown on drg.

All as per item ser No, 70 but sides of table dressing ladies complete all as specified and shown on drg.

Taking down of unsv bottom frame and S&F new frame with legs of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size complete all as specified and shown on drawing.

Taking down of unsv shutter and S&F new shutter made of 18/19 mm thick prelaminated MDF board ISI marked with 4 mm thick teak wood beading all round all as per shape and size complete all as specified and shown on drawing.

Preparation of surface with sand paper after scrubbing and French polishing to stool dressing, with and including to the parts repaired/replaced under item No 70 to 81 to the required gloss to match with the existing complete all as specified and shown on drg.

TABLE BED SIDE FD-28 & FD-276: (For Item No 83 to 87) Taking out old damaged top and supply and fixing top of table bed side made of 18/19 mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade). Complete all as specified and shown on drawing.

All as per item No,83 but new side of size 510x230mm complete all as specified and shown on drg.

All as per item No 83 but new shelves of size 414x230mm complete all as specified and shown on drg.

Taking out old damage back and supply and fixing back made of 6mm thick ply wood BWR ISI marked. Complete all as specified and shown on drgs.

Preparation of surface with sand paper after scrubbing and French polishing to bedside, with and including to the parts repaired/replaced under item No 83 to 86 to the required gloss to match with the existing complete all as specified and shown on drg.

HAT STAND WITH MIRROR (Drg No FD-233): (For Item No 88 to 93) Taking down old unserviceable frame and supply and fixing frame of size 710x1000mm with 4mm thick teak face ply ISI marked in front side and shall be covered with 4mm thick commercial ply on back side complete all as specified and shown on drgs.

Taking down of unserviceable mirror and teak wood beading and S&F new mirror of size 300x460x5mm and teak wood beading 10x12mm provided vertically top/bottom vertically (Side) shall be fixed on right hand complete all as specifed and shown on drg.

Taking down of unserviceable hanging MS Plate and S&F new MS Plate of best quality complete all as specified and directed.

Taking down of unserviceable Brass peg and S&F new Brass peg of Size 75x120mm best quality complete as specified and directed.

Taking down of unserviceable Aluminium peg and S&F new Aluminium peg peg of Size 75x120mm best quality complete as specified and directed.

Preparation of surface with sand paper after scrubbing and French polishing to hat stand , with and including to the parts repaired/replaced under item No 88 to 89 to the required gloss to match with the existing complete all as specified and shown on drg.

TABLE 900X900X760MM :(Drg No FD-88M & FD-291): (For Item No 94 to 98) Taking out unservicable top and S&F Top of table shall be made of 18/19 mm prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade) complete all as specified and as shown on drawing.

Taking down U/S legs and S&F new legs 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified and shwon on drawing.

All as per item No.94 but size 900x900 top rail complete all as specified and shown on drg.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and directed.

Preparation of surface with sand paper after scrubbing and French polishing to table 900x900mm with and including to the parts repaired/replaced under item No 94 to 97 to the required gloss to match with the existing complete all as specified and shown on drg.

BIN LINEN MULTIPURPOSE :DRG NO 242, FD-1104 & FD/E6/MAP/09: (For Item No 99 to 108) Taking down U/S legs and S&F new legs of size 50x50x75mm made of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture through out shape and size applying duly two coat of French polished to match existing surface complete all as specified and shown on drg.

All as item No 99 above but bottom frame of size 1060x 290x 25mm complete all as specified and shown on drg.

Taking down old unserviceable drawers and supply and fixing new drawer made of 12mm thick ply BWR ISI marked with size and shape as exists complete all as specified and shown on drg.

Taking down old unserviceable Top and supply and fixing New top made of 18/19 mm thick prelaminated MDF Board (exterior Grade) ISI marked. Complete all as specified and shown on drg.

Taking down U/S partition and S&F new partition of MDF board ISI marked of size 610x460mm x18mm complete all as specified and as shown on drg.

All as per item ser No. 103 but top or bottom of size 1220x455mmx18mm complete all as specified and shown on drg.

Taking down old unserviceable back ply and supply and fixing new ply of size 1220x635mm, 6mm thick commericial BWR grade ISI marked, IS-303 grade complete all as specified and shown on drg

All as item No 105 but side of size 645 x 455mm complete all as specified and shown on drg.

All as per item No.105 but shelf of size 425x770 complete all as specified and shown on drg.

Taking down old unserviceable knob and supply and fixing knob 40mm dia, brass, chromium plated complete all as specified and as shown on drg.

Preparation of surface with sand paper after scrubbing and French polishing to side board, excluding to the parts repaired/replaced under item No 99 to 107 to the required gloss, to match with the existing complete all as specified and as shown on drg.

BED/COAT PLY TOP (Drg No FD-246):: (For Item No 110 to 118) Taking down old U/S ply from Bed/Bed Ply wood top and S&F new ply 12 mm thick (BWR) grade as per IS - 303 and having ISI marked and french polish complete bed up to required finish size and shape complete all as specified and shown on drg.

Taking out U/S long rails of bed ply wood top and S & F New long rail of size 1980 x 90 x 35 mm of 1 st class seasoned teak wood free from knots and cracks with permissible moisture contents complete all as specified and shown on drg.

All as per item No 110 but bottom rail of size 900 x 60 x 40 mm Timber Sal wood complete all as specified and shown on drg.

All as per item No 110 but stiffner of size 900 x 40 x 40 mm Timber Sal wood complete all as specified and shown on drg.

Taking out U/S head board from Bed/Bed ply wood top and S&F new head board of size 908 x 450 mm duly polished upto required finish complete all as specified and shown on drg.

All as per item No 110 but foot board size 908 x 375 mm complete all as specified and shown on drg.

Taking out old U/S both side head board bed ply top and S&F 4 mm thick one side teak face ply ISI marked shall be used both side of the head board and 4 mm thick teak wood beading all round complete all as specified and shown on drg.

All as per item No 110 but short rail of size 900x65x50mm complete all as specified and shown on drg..

Preparation of surface with sand paper after scrubbing and French polishing to complete bed, excluding to the parts repaired/replaced under item No 110 to 117 to the required gloss, to match with the existing complete all as specified and as shown on drg.

TABLE DRESSING GENTS WITH MIRROR:( FD 230) : (For Item No 119 to 128) Taking out existing old unserviceable foggi fadded looking mirror of size 1200x550mm x 5mm thick with frame and S&F new looking mirror of same size and shape make : ATUL/MODI Guard duly framed with 1st class seasoned teak wood and back of mirror complete all as spceified and shown on drg.

Removal of brocken glass panel and new glass pane of size 5mm thick duly slotted glass for sliding purpose complete all as specified and directed.

S&F new fastner on back of looking mirror for fixing on wall as per shape and size complete all as specified and shown on drawing.

S&F new haps and stapal on front of looking mirror for open and close of looking mirror complete all as specified and shown on drawing.

S&F new handle 100mm make of Stainless steel on front of looking mirror for open and close of looking mirror complete all as specified and shwon on drawing.

Taking down bottom MDF board 18mm of drawers and S&F new MDF board 18mm exterior grade grade ISI Marked,IS-303 grade as per required size complete all as specified and directed

All as per item ser No, 119 but sides of table dressing ladies complete all as specified and shown on drg.

Taking down of unserviceable bottom frame and S&F new frame with legs of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size complete all as specified and shwon on drawing.

Taking down of unserviceable piano type hinges and S&F new piano type hinges complete all as specified and shown on drawing.

Preparation of surface with sand paper after scrubbing and French polishing to stool dressing, with and including to the parts repaired/replaced under item No 69 to 80 to the required gloss to match with the existing complete all as specified and shown on drg.

TCHARPOY IP FOLDING PLY TOP DRG No : FD-388(R) (For Item No 129 to 130) Taking out unserviceable ply top and S/F ply top made of 8 mm thck BWR ply ISI marked size and shape exists complete all as specified and shown on drg.

Welding of broken joints including legs which shall be fixed with frame by nut and bolts of size as exists and applying two coat of OG enameld paint over a coat of red oxide primer after cleanig the suface complete all as as specified and shown on drg.

PAINTING AND POLISHING OF ALL TYPE OF WOODEN FURNITURE M & L for Scraping of old polishing with sand paper/Grinder and apply two coat of Malamine Polish and one coat upto the required gloss finish or colour as directed to the following items/articles of furniture to complete the items internally and externally including necessary preparation of surfaces. (a) Book case complete all as specified and shown on drg No FD-237.

All as per item No 131 but Bed ply top complete all as specified and shown on drg No FD-246.

All as per item No 131 but Chair writing complete all as specified and shown on drg No FD-280.

All as per item No 131 but Chair Dining complete all as specified and shown on drg FD-279 & FD/MAP-II/04

All as per item No 131 but Chair easy complete all as specified and shown on drg FD-229.

All as per item No 131 but Hat stand with mirror complete all as specified and shown on drg FD-233.

All as per item No 131 but Side board complete all as specified and shown on drg FD-26M.

All as per item No 131 but Stool Dressing complete all as specified and shown on drg FD-282.

All as per item No 131 but Sofa Set wooden 3 pieces to seat 5 persons complete all as specified and shown on drg FD-281 and FD/MAP-II/02.

All as per item No 131 but Table 3'x2' with or without drawers complete all as specified and shown on drg FD-282.

All as per item No 131 but Table 3'x3' complete all as specified and shown on drg FD-291.

All as per item No 131 but Table dining 4/6/8 persons complete all as specified and shown on drg FD-273 & FD/MAP-II/03.

All as per item No 131 but Bin Soil multipurpose complete all as specified and shown on drg FD/E6/MAP/09

All as per item No 131 but Table bed side complete all as specified and shown on drg FD-248 & FD/E6/MAP/15

All as per item No 131 but Table peg complete all as specified and shown on drg FD-277 & FD/MAP/11.

All as per item No 131 but Teapoy complete all as specified and shown on drg FD-278.

All as per item No 131 but Table dressing ladies with mirror complete all as specified and shown on drg FD-FD-32M & FD/MAP-II/07.

All as per item No 131 but Table centre complete all as specified and shown on drg FD-274.

All as per item No 131 but Table writing complete all as specified and shown on drg FD-275.

PAINTING AND POLISHING OF ALL TYPE OF STEEL FURNITURE Applying two coats of AD Grey/Olive green synthetic enamel paint, internally and hammer tone / olive green externally by spary gun over a coat of red oxide primer including necessary preparation ofsufraces after repairing the denting, deshaped portion, derusting and cleaning of rusted sufraces by sand papering including preparation of patches by applying putty etc to the following steel items/articles :- Table office Offrs steel/Table office clk steel complete all as specified and shown on drg FD-1003, FD-1004 & FD-199.

All as per item No 150 but Locker bed side steel complete all as specified and shown on drg No FD-1035.

All as per item No 150 but rack steel 6 tier complete all as specified and shown on drg No FD-1038.

All as per item No 150 but Rack steel 3 tier complete all as specified and shown on drg No FD-1039.

All as per item No 150 but Almirah large 1/2 hanging 1/2 shelves with shelves & Almirah glazed complete all as specified and shown on drg No FD-1033.

All as per item No 150 but Almirah large with shelves complete all as specified and shown on drg No FD-1031.

All as per item No 150 but Almirah small/medium with shelves complete all as specified and shown on drg No FD-1032.

All as per item No 150 but Book Shelf open large/small steel complete all as specified and shown on drg No FD-69(M).

All as per item No 150 but Table ORs Dining complete all as specified and shown on drg No FD-165M.

All as per item No 150 but Rack towel steel complete all as specified and shown on drg No FD-81M.

All as per item No 150 but Teapoy Verandah complete all as specified and shown on drg No FD-35M.

All as per item No 150 but Rack Shoe Steel complete all as specified and shown on drg No FD-E6/MAP/02 (R).

CHARPOY GI PIPE HARD TOP DRG No: FD-220A Supply and fixing 12mm thick new ply top size 1980mm x900 mm, BWR grade, ISI marked with 06 Nos of GI nut & bolt of size 3''x6mm and 06 Nos of 1.5"x6mm nut & bolt including taking out old unserviceable ply top complete and tightening of all joints of charpoy all as specified and directed.

Supply and fixing new long rail of GI charpoy of size 1920mm made out of 32 mm dia GI pipe medium grade ISI marked including cutting and making threads both side including taking out old unserviceable long rail complete all as specified and directed.

Fixing only short rail of GI charpoy 32mm bore medium grade, made out from long rail retreived under item No 2 above including cutting and making threads both side including taking out old unserviceable short rail complete all as specified and directed.

Fixing only legs of GI charpoy 32mm bore medium grade, made out from short rail retreived under item No 3 above including cutting and making threads and 3mm thick round MS plate welded at bottom of each leg including taking out old unserviceable legs complete all as specified and directed.

S&F 32 mm bore, heavy duty, 3 way GI elbow, ISI marked having weight not less than 440 gms each including taking out old unserviceable elbow complete all as specified and directed.

S&F 32 mm bore, heavy duty, GI checknut hexagonal, ISI marked including taking out old old unserviceable checknut complete all as specified and directed.

S&F 870 mm long new stiffner duly black painted made of 40x6mm thick MS flat iron including taking out unserviceable stiffner complete all as specified all as specified and directed.

S& F new L-type bracket duly black painted made of MS flat iron of Size 40x6x75mm long and welded in frame including taking out old bracket complete all as specified and directed.

GUJRAL BUILDERS

Avinash Enterprises

RAGHUVANSH TRADERS

ANAND FURNITURE

HALLIOX ENTERPRISES

M/S Shri Balaji Enterprises