Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹68.2 L
EMD Value
₹1.4 L
Closing Date
6 Nov 2026, 3:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDERCELL
14 conditions · 2 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022: The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC 2022 (Annexure-VI (B) of Tender Document), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet, and as per tender document.
Technical Eligibility Criteria as per Clause 10.1 of Part-I of IRSGCC-2022: a. The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: i. Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, OR ii. Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, OR iii. One similar work costing not less than the amount equal to 60% of advertised value of the tender. b. In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.) (Not Applicable for this Tender), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: i. Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, OR ii. Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, OR iii. One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components, and as per tender document. Note - Works Completion certificate of Similar work along with copy of LOA as per IR GCC 2022 may be submitted, this shall be on bidder's name. NOTE - Substantially Completed Work is defined in Tender Document Attached Herewith vide Para 10.5 of GCC April 2022 with latest applicable ACS. Note - Works Completion certificate of Similar work along with copy of LOA as per IR GCC 2022 may be submitted, this shall be on bidder's name.NOTE - Substantially Completed Work is defined in Tender Document Attached Herewith vide Para 10.5 of GCC April 2022 with latest applicable ACS.
Definition of Similar Work: - "Any work involving provision of Datacom Equipment/LAN/Passenger Reservation System (PRS)/Unreserved Ticketing System (UTS)/Crew Management System (CMS)/Coaching Operation Information System (COIS)/Freight Operation Information System (FOIS)/Terminal Management System (TMS)/Hospital Management Information System (HMIS)".
38 conditions · 13 needing a document upload
The said suppliers of goods and/or services would be subject to GST Act and rules as applicable from time to time. Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
The offer submitted by the firm shall be in compliance of Railway Board's letter No. 2020/Tele15(18)/4(3317053) dated 21.01.2025 regarding Government Procurement (Preference to Make in India) Order 2017- Telecom Products, Services or Works.
The offer submitted by the firm against this tender shall be in compliance of Order No. P-45021/2/2017-PP (BE-II)-Part (4) Vol. II dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Ministry of Commerce and Industry attached with this tender as PDF. The tenderer shall enter local content percentage with their offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
False/Incomplete statement: Any statement/declaration made by the Tenderer, if proved wrong or false or incomplete or such as to withhold any information relevant to the award of the tender, at any stage of the tender or in the event of his tender having been accepted at any stage of the contract, shall tender his/their tender(s)/contractors) liable to be cancelled/rescinded, in addition to the following: (i) If such statement is found at the stage of tender his total earnest money shall be forfeited. (ii) In case such a statement is found at the contract stage rights available to the Railways under clause 62 of the GCC-2022 shall be applicable.
If the mandatory documents asked for in the E-Tender Document are not submitted along with the tender, the tender submitted otherwise will be treated as incomplete and will not be considered.
It is responsibility of the tenderer that they ensure to see any Corrigendum of the tender to check the corrigendum on the website from time to time.
The responsibility of uploading the correct documents lies with the Tenderer's. In case, the documents uploaded are found manipulated/forged, the offers of such Tenderer's will not be considered and such Tenderer's are liable to be debarred to participate for future works duly forfeiting their Earnest Money and the tenderer/contractor shall have no claims whatsoever in this regard. Railway reserves the right to determine/rescind the contract entered into in case of such false certificates/documents at any stage of the contract treating it as default of the contractor.
Railways, being principal employer are required to ensure that the contractors are complying with the provisions of the contract labour (R&A) Act, 1970 and Minimum wages Act, 1948 strictly and arranging prescribed minimum wages to the contractor labourers vide Railway Board letter No. 2016/E(LL)/AT/MW/1 Dt. 05.06.2017.
It is the responsibility of contractor to arrange the payment of the labour employed for the work through bank and to deduct PF as per the provisions of Minimum Wages Act.
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenders shall be treated as NULL & Void as per Para 4.6 of STD- 2022
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
As per Railway board letter No. 2018/CE-1/CT/4 dt. 17.10.2018 contractor shall mandatorily update the labour data on Railway Sharmik kalyan portal on monthly basis. The detailed guidelines are given in Clause 5.4 of PART-I of Standard Tender Document- 2022.
Provision of Telecom work in connection of Renovation & Improvement of PCPO office for CBT Examination center & Training for Trainees at Gorakhpur NE Railway, Provision of Telecom work in connection of Proposed Renovation of PCOM, PCCM & PCE office at Gorakhpur NE Railway & Provision of Telecom work in connection of Proposed Renovation of TMC Shed GKC NE Railway by supply, installation, testing & commissioning of telecom assets and LAN equipments along with associated accessories
N-235-62TeleTender13-2026~NER
N-235-62TeleTender13-2026
Open
Works - General
6 Months
Gorakhpur, Uttar Pradesh
₹0
₹1.4 L
7 Oct 2026
7 Oct 2026
23 Oct 2026
121 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 68,24,396.72 | ||
| — | 23.00 | — | — | ||
| Supply & Configuration of rack mountable 24 port Manageable Layer-2 Switch with 24 x 10/100/1000 BASE and 4x1G (minimum) SFP+ ports with minimum PoE Power Budget of 370W or better, switching capacity should be 56 Gbps or better, forwarding rate 41.7 MPPS or better as per para 14.0 (II) of RDSO spec. No:RDSO/SPN/TC/65/2021 Version 6.0 or latest. All the accessories and fixing materials required for this installation are to be supplied & installation to be done by contractor within the same cost. Switch should be TTP approved and to be procured from TTP approved sources. Make: Cisco/Juniper/HP/Zyxel/Digisol/DLink or superior. (Inspection : RDSO) | — | — | — | 9,15,845.28 | |
| — | 30.00 | — | — | ||
| Supply, Installation,Testing & Commissioning of layer-2 switch (minimum 8+2 manageable) with 08 Nos. 10/100/1000 Mbps ethernet port POE and 02 nos.1000 base X SM SFT port with optical modules complete with all accessories etc. as per clause 14.0 (III) of RDSO specification no. RDSO/ SPN/ TC/ 65/ 2021 Rev 6.0 Amendment No. 1, 2 & 3 or latest & as per Technical Specification in Annexure A attached. Switch should be TTP approved and to be procured from TTP approved sources. Make: Cisco/ Juniper/ HP/ Zyxel/ Digisol/ D-Link or superior. (Inspection: RDSO). | — | — | — | 4,92,228.3 | |
| — | 4000.00 | — | — | ||
| Supply of Single mode 6 Fiber Armoured Optic Fibre Cable as per Technical Specification in Annexure A attached. Make: MOLEX, AMP, Schneider, Systemax, Panduit, D- Link,Finolex. (Inspection: Consignee) | — | — | — | 89,440 | |
| Supply of UTP Enhanced CAT-6 Cable 305 Mtrs Roll /Bundle as per Technical Specification in Annexure-A attached. Make: D-link/syrotech/Digisol/Siemens/Systemax/Panduit/AMP/ Finolex/Sterlite/Digilink/DAX/Lucent/Crone/Tyco. (Inspection: Consignee) | — | — | — | 3,59,186.3 | |
| Laying of CAT-6/OFC cable in PVC casing caping/pipe as per direction of site engineer. | — | — | — | 64,220 | |
| — | 485.00 | — | — | ||
| Supply of I/O Box suitable for termination of CAT-6 UTP cable including back mount box, face plate & Modular jack. It Shall comply to TEC GR No. TEC/GR/SLC -01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version. Make: Legrand /Dlink/Molex/ iball/Syrotech/Commscope/Digisol. (Inspection: Consignee) | — | — | — | 76,261.4 | |
| — | 485.00 | — | — | ||
| Fixing of I/O Box and termination of CAT-6 Cable on it. | — | — | — | 13,706.1 | |
| — | 2500.00 | — | — | ||
| Supply of RJ-45 Connector. Make: D-Link/Digisol or better. (Inspection: Consignee) | — | — | — | 9,250 | |
| — | 200.00 | — | — | ||
| Supply of Single Mode Fiber Optic Patch Cord, length 3 meters ( FC-FC/FC PC/FCSC/LC-SC/LC-LC) as per Technical Specification in Annexure-A attached & as per site requirement. Make: 3M, Huber- Shuner, R&M, TE Connectivity/Raychem/D-Link/Molex/ iball/Syrotech. (Inspection: Consignee) | — | — | — | 62,924 | |
| — | 490.00 | — | — | ||
| Supply of UTP CAT 6 Patch Cord, 2 Meters long factory crimped with suitable connector at both ends. It Shall comply to TEC GR No. TEC/GR/SLC - 01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments,Version. Make: Schneider, Systemax, Panduit, D- Link, Molex. (Inspection: Consignee) . | — | — | — | 59,118.5 | |
| — | 17.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of 19", 9U Networking Rack with PDU as per Technical Specification in Annexure-A attached. Make: APW President or Rittal or HCL or APW or Comrack or Valrack or Schneider or Dataracks or D-Link. (Inspection: Consignee) | — | — | — | 72,870.16 | |
| — | 16.00 | — | — | ||
| Supply, Installation and Splicing of FMS (12 F) 19 inch rack mountable loaded with couplers/Pigtail 1.5 meters with all the accessories required for installation as per Technical Specification in Annexure-A attached. Make: Molex/ iball/D-Link/ Syrotech/ Commscope/ Digisol/PANDUIT/3M/Raychem/TYCO. (Inspection: Consignee) | — | — | — | 87,896.64 | |
| — | 8500.00 | — | — | ||
| Supply and fixing of different sizes of PVC casing /Pipes as required by Railway at site by fixing /clamping to the wall for indoor wiring purposes. Make: D Plast/ Polypack/ Polycab/ Supreme/Astrol/AKG/Maruti Flexoplast/Austro Plastic. (Inspection: Consignee) | — | — | — | 2,68,005 | |
| — | 15.00 | — | — | ||
| Supply, Installation, Testing and commissioning of 2 KVA on line UPS with 2 hrs backup as per Technical Specification in Annexure-A attached. Make: Uniline/APC/NUMAX/Microtek/Vertive/luminuous/VGuard/Exide/Emerson/Amararaja/TATAlibert/Numer ic. (Inspection : RITES) | — | — | — | 9,86,019 | |
| — | 4100.00 | — | — | ||
| Chase cutting in floor / wall and restoring of floor / wall with plaster for concealing of conduit pipe in floor /wall as per direction of site engineer | — | — | — | 1,16,604 | |
| — | 18.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Non-Executive open standard SIP Phone (VoIP Phone) as per Technical Specification in Annexure-A attached. (Inspection: Consignee) | — | — | — | 1,29,789.18 | |
| — | 500.00 | — | — | ||
| Supply of 20 Pair PVC Switch Board Telephone Cable of dia 0.5 mm annealed tinned copper conductor as per TEC spec. GR/WIR- 06/03. MAR 2002 or latest & as per Technical Specification in Annexure-A attached. Make: Finolex/ Bhansali / Usha Martin,bharat,network,delton cable. (Inspection: Consignee) | — | — | — | 30,225 | |
| — | 4000.00 | — | — | ||
| Laying/Drawing of PVC Telecom cable all types in PVC Conduit pipe | — | — | — | 11,560 | |
| — | 8.00 | — | — | ||
| Supply & installation and wiring of 20 pair Krone type TMC DP fitted with all require accessories as per Technical Specification in Annexure-A attached. All required material for installation, fixing & wiring to be arranged and done by contractor at his own cost, as per direction of site in charge of work. Make: Gleam Light/Kapur Plastics/G. S. Industries/Shiv Shakti Engineering. (Inspection: Consignee) | — | — | — | 14,098.88 | |
| — | 2000.00 | — | — | ||
| Supply of Power cable 3 core 2.5 sq mm multi strand (36/0.3 mm dia) cable suitable for railway electrification area as per Technical Specification in Annexure A attached. Make: Delton/LAPP/Finolex/Havells/Polycab/Mescab. (Inspection: Consignee). | — | — | — | 1,23,960 | |
| — | 94.00 | — | — | ||
| Supply and Installation of Single fiber Single mode SFP 1G of same make of 24 port Manageable Layer-2 Switch or any reputed brand that is fully compatible with Switch. (Inspection: Consignee). | — | — | — | 1,16,777.14 | |
| — | 8.00 | — | — | ||
| Supply of Wireless Access Point dual band indoor managed/standalone access, built in antenna, two ports (1GE + 1FE), POE support. This includes all accessories. Make: DIGISOL model DG-WM5307IAC or of equivalent specifications of reputed make. (Inspection: Consignee). | — | — | — | 1,29,906.4 | |
| — | 8.00 | — | — | ||
| Installation of wireless access point dual band indoor managed/standalone access, built in antenna, two ports(1GE + 1FE), POE support. | — | — | — | 7,956.48 | |
| — | 1.00 | — | — | ||
| Supply of Wireless Controller supports two 10/100/1000 Base- T electrical ports on balances loads based and can manage upto 128 smart wireless Aps, Wireless protocols and standards: 802.11/a/b/g/n/d/h/ i/e/k with RF management. Make: DIGISOL DGWU2002 or of equivalent specifications of reputed make. (Inspection: Consignee). | — | — | — | 1,21,598.76 | |
| — | 1.00 | — | — | ||
| Installation of Wireless Controller supports two 10/100/1000 BaseT electrical ports on balances loads based and can manage upto 128 smart wireless Aps, Wireless protocols and standards: 802.11/a/b/g/n/d/h/ i/e/k with RF management. | — | — | — | 7,599.92 | |
| — | 2.00 | — | — | ||
| Supply of Crimping Tool. Make: Jainson/ DLink/ Klein/ Platinum /Maxmoral/ TRENDnet. (Inspection: Consignee) | — | — | — | 2,231.38 | |
| — | 4.00 | — | — | ||
| Supply of LAN Tester. Make & Model: D-Link NTL-CT-001/FESUS NF-801B/Techtest FWT11 or equivalent specification of reputed brand. (Inspection: Consignee) | — | — | — | 6,622.32 | |
| — | 2.00 | — | — | ||
| Supply of Visual OFC Fault Locator support 20Km as per Technical Specification in Annexure-A attached. (Inspection: Consignee) | — | — | — | 14,544 | |
| — | 200.00 | — | — | ||
| Supply of PVC Channel of size 50 mm X 50 mm with cover.Width of channel should be minimum 50mm, depth should be minimum 50 mm & thickness of channel should be minimum 1.2 mm. Make: precision, Garware/D Plast/Presto Plat/Presto Teak/Polypack/ Polycab/ Supreme/Astrol/AKG/Maruti Flexoplast/Austro Plastic. (Inspection: Consignee) | — | — | — | 13,444 | |
| — | 200.00 | — | — | ||
| Fixing of PVC Channel of size 50 mm X 50 mm on the wall including all fixing material for fixing of pipe as per instruction of site incharge. All fixing material should be supplied by the contractor as per site requirement. | — | — | — | 1,632 | |
| — | 10.00 | — | — | ||
| Supply & installation of 12 Fiber Termination Box as per site requirement. (Inspection: Consignee) | — | — | — | 4,260 | |
| — | 40.00 | — | — | ||
| Supply Installation testing and commissioning of Full HD Bullet IP colour cameras along with Housing (IP 66 rated for out door operation), Mount (Suitable for Pole mounting) and all accessories required for installation purpose along with 128 GB SD/ SDXC Class-10 or higher Memory Card as per RDSO Specification No. RDSO/SPN/TC/65/2021 Vers. 6.0 Amdt 1,2 & 3 or latest (copy enclosed). Security auditing & testing of equipment including source code of camera and software shall be carried out from STQC (Ministry of Electronic & information Technology ) only. Regulatory approval/ certification are also to be provided from STQC only. (Inspection: RDSO) | — | — | — | 5,91,410.8 | |
| — | 2.00 | — | — | ||
| Supply and Installation of 32 channel Network Video Recorder (NVR) with minimum 08 SATA interfaces (each SATA ports Should support minimum 10TB HDD) with RAID 5/6 configuration including Video management and Video recording software(If any) and 32 Nos. of camera recording license (if any), client license in an embedded form or a combination of both the solutions with all required licenses (if any) as per RDSO spec.NO. RDSO/SPN/TC/65/2021 Version 6.0 with amendment no.1 or latest. (Inspection: Consignee) | — | — | — | 79,135.06 | |
| — | 6.00 | — | — | ||
| Supply, installation testing & commissioning of 8 TB surveillance Hard disk with SATA 6.0 Gbps, 7200 RPM, workload rate- 300 TB/year. Make: SEAGATE/WD or superior. (Inspection: Consignee) | — | — | — | 1,10,078.58 | |
| — | 3.00 | — | — | ||
| Supply & Installation of 65 Inches Professional UHD Display or higher version as per Technical Specification in Annexure A attached. Make: Sony/Samsung/LG (Inspection: Consignee) | — | — | — | 2,50,026.45 | |
| — | 10.00 | — | — | ||
| Supply & Installation of 4U Rack size 550mm (width) x 400-450mm (depth) with PDU. Rack shall have following features: i. Standard: DIN 41494 or equivalent, ii. Front door: Lockable Toughened Glass Door, iii. Basic frame: Steel powder coated finish, iv. Mounting: 19 inch wall mounted. (Inspection: Consignee) | — | — | — | 27,691.9 | |
| — | 3.00 | — | — | ||
| "Supply, Installation, Testing & Commissioning of PC Workstation for Viewing cameras in multi screen mode,Monitoring and System management and 4K UHD LED Monitor of 24 inch size including all required licensed software's(like OS, MS Office, Anti-virus with 03 years subscription), multifunction device for documentation, accommodate PC workstation & monitor with all accessories, spike buster (minimum 5 nos. 6A points with fuse), 1KVA UPS,Mounting Rack and other required materials as per RDSO spec. No:RDSO/SPN/TC/65/2021 Revision 6.0 with Amendt. 1, 2 & 3or latest. (Inspection: RDSO)" | — | — | — | 5,68,235.76 | |
| — | 4.00 | — | — | ||
| Supply & Fixing of HDMI cable of length 15 meter. Make: Kramer or equivalent specification of reputed brand like Extron/Crestron/Honeywell/MX/Belden. (Inspection: Consignee) | — | — | — | 26,982.48 | |
| — | 2.00 | — | — | ||
| Supply of HDMI Wireless Transmitter /Receiver set with a transmission distance of minimum 100 meter and latency of less than 0.1s. HDMI Wireless Transmitter /Receiver set should compatible for above display system. Make: Hollyland or equivalent specification of reputed brand like Extron/Crestron/Honeywell/MX. (Inspection: Consignee) | — | — | — | 53,007.42 | |
| — | 2.00 | — | — | ||
| Supply of 1x8 4K 18 Gbps Powered HDMI Splitter as per Technical Specification in Annexure-A attached. Make: Extron/Kramer /Crestron/ATEN/ Trip Lite. (Inspection: Consignee) | — | — | — | 10,722.76 | |
| — | 1.00 | — | — | ||
| Supply of 2-Channel 1300 Watt Power Amplifier. Make: Crown Model XLC21300 or equivalent specifications of reputed make. (Inspection: Consignee) | — | — | — | 54,216.7 | |
| — | 2.00 | — | — | ||
| Supply of Wired Dynamic Microphone for Vocals. Frequency Response: 50 to 15,000 Hz, Polar Pattern: cardioid (unidirectional), Output Impedance (at 1,000 Hz): 300 Ohms, Output Level (at 1,000 Hz): -54.5 dBV/Pa. (1.85 mV). Should have Die cast metal handle, should matte finish, silver coloured, spherical steel mesh grille. Make: Shure SM 58 or equivalent/higher specification of reputed brand like-Bose or Sennheiser make. (Inspection: Consignee) | — | — | — | 12,425.76 | |
| — | 1.00 | — | — | ||
| Supply of Wireless handheld microphone. Make: Sennheiser-XSW 1-825-Dual or equivalent/higher specification of reputed brand like-Bose or Shure. (Inspection: Consignee) | — | — | — | 39,425.58 | |
| — | 2.00 | — | — | ||
| Supply of Gooseneck Microphone with table top on/off switch as per Technical Specification in Annexure-A attached. Make: Sennheiser MEG 14-40 B+MAT 1335 or equivalent/higher specification of reputed brand like-Bose or Shure. (Inspection: Consignee) | — | — | — | 40,797.86 | |
| — | 1000.00 | — | — | ||
| Supply of Speaker Cable 2 core PVC sheathed & Screened of size 47/0.193 as per specification No. IS-694. (Inspection: Consignee) | — | — | — | 45,360 | |
| — | 4.00 | — | — | ||
| Supply of Power Board (3 No's 5 Amp & 1 No. 15 Amp socket total -4 points). (Inspection: Consignee) | — | — | — | 2,379.76 | |
| — | 1.00 | — | — | ||
| Supply & Installation of Custom-built Equipment Rack / Cabinet with caster wheel & three adjustable shelfs,transparent front door with lock, back door with lock for housing of Amplifiers, conference Controller,wireless mike etc. with mini. 5/15 Amp. 5 nos. socket extension Board of reputed make. Make: Valrack, Rittal, APW Presiden or better. (Inspection: Consignee) | — | — | — | 8,412.38 | |
| — | 8.00 | — | — | ||
| Supply of Wall Mount Cabinet Speaker, 30 watt with standard adjustable wall- mounting bracket & necessary accessories for accurate positioning. The loudspeakers should deliver professional performance from a robust, ideal sound beaming for indoor use in conference venues as per Technical Specification in Annexure-A attached. Make & Model: BOSCH LB2-UC30 or equivalent specification of reputed brand like Bose/ L'Acoustic/ Renkus Heinz. (Inspection: Consignee) | — | — | — | 1,26,742 | |
| — | 8.00 | — | — | ||
| Installation, fixing, testing & commissioning of wall mount speakers with all necessary clamps, bolts etc. will be arranged and supplied by contractor at his own cost. Installation as per guideline of site engineer/site in charge | — | — | — | 5,256.96 | |
| — | 4.00 | — | — | ||
| Supply of 19 inch 1U Rack Mountable Fiber Patch Panel Loaded with 1:8 PLC Splitter Pre terminated with SC/APC connector and Adaptors, Splice Tray & Adaptor plates. Port: 1 To 8, Connector type: SC/APC, Fiber Type: Single-mode, Operating Wavelength: 1260 1650 nm, Insertion Loss (dB) Max.: < 10.8, Return Loss (dB) Min: 55, Splitter Type : ABS Box, Block Less Mini Tube, Compact design, Custom and Rugged Packaging. Make: DRONE EDGE/HOLIGHT or similar. (Inspection: Consignee) | — | — | — | 56,640 | |
| — | 15.00 | — | — | ||
| Supply & Installation of 19", 6U Networking Rack with PDU as per Technical Specification in Annexure-A attached. Make: APW President or Rittal or HCL or APW or Comrack or Valrack or Schneider or Dataracks or D-Link. (Inspection: Consignee) | — | — | — | 44,680.95 | |
| — | 2.00 | — | — | ||
| Supply & Installation of LIU for 6 fiber with pigtail/ couplers & all other accessories and termination/ splicing of 6 fibre OFC cable in it as per Technical Specification in Annexure-A attached. Make: Molex/ iball/D-Link/ Syrotech/ Commscope/ Digisol/PANDUIT/3M/Raychem/TYCO. (Inspection: Consignee) | — | — | — | 7,024.98 | |
| — | 1500.00 | — | — | ||
| Supply of 10 Pair PVC Switch Board Telephone Cable of dia 0.5 mm annealed tinned copper conductor as per TEC spec. GR/WIR- 06/03. MAR 2002 or latest & as per Technical Specification in Annexure-A attached. Make: Finolex/ Bhansali / Usha Martin,bharat,network,delton cable. (Inspection: Consignee) | — | — | — | 48,060 | |
| — | 1000.00 | — | — | ||
| Supply of 5 Pair PVC Switch Board Telephone Cable of dia 0.5 mm annealed tinned copper conductor as per TEC spec. GR/WIR- 06/03. MAR 2002 or latest & as per Technical Specification in Annexure-A attached. Make: Finolex/ Bhansali / Usha Martin,bharat,network,delton cable. (Inspection: Consignee) | — | — | — | 16,900 | |
| — | 9.00 | — | — | ||
| Supply of Gigabit Ethernet Media Converter Single Mode Single Fiber, SM, Sc, 1310nm, with all accessories like power adaptor as per Technical Specification in Annexure-A attached. Make: DRON EDGE DE-SMBIDI-2025/Tech routes/Syrotech/D-Link/TP Link/Digisol. (Inspection: Consignee) | — | — | — | 22,237.65 | |
| — | 6.00 | — | — | ||
| Supply, Installation and Splicing of FMS (12 F) 19 inch rack mountable loaded with couplers/Pigtail 2.0 meters with all the accessories required for installation as per Technical Specification in Annexure-A attached. Make: Molex/ iball/D-Link/ Syrotech/ Commscope/ Digisol/PANDUIT/3M/Raychem/TYCO. (Inspection: Consignee) | — | — | — | 34,649.52 | |
| — | 50.00 | — | — | ||
| Cutting of all types of platforms/road crossing and trenching and excavation to a width and depth of 300mm x 300mm, laying of DWC/HDPE/GI pipe in the trench and refilling & concreting it afterwards as per original condition. | — | — | — | 6,394 | |
| — | 4.00 | — | — | ||
| Supply, Testing and Commissioning of On line UPS 1 KVA with minimum 1 hrs backup as per Technical Specification in Annexure-A attached. Make: Uniline/APC/NUMAX/Microtek/Vertive/luminuous/VGuard/Exide/Emerson/Amararaja/TATAlibert/Numer ic. (Inspection: Consignee) | — | — | — | 66,479.2 | |
| — | 1.00 | — | — | ||
| Supply of Aluminium Telescopic Ladder minimum 10.5 ft (3.2 mtr). Make: Bathla/Mustu/Smarty/Bharat or superior. (Inspection: Consignee) | — | — | — | 7,171.15 | |
| — | 2.00 | — | — | ||
| Supply of Crimping Tool for RJ45. Make/Model- Cadyec CACT568 or equivalent specification of reputed brand. (Inspection: Consignee) | — | — | — | 3,778.5 | |
| — | 1.00 | — | — | ||
| Supply and installation of 55 inch 4K UHD Display as per Technical Specification in Annexure A attached with 3 years warranty . Make: LG/SAMSUNG/SONY. (Inspection: Consignee) | — | — | — | 48,292.42 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TDCombinedLANwork.pdf
ATTACHMENT
TechnicalSpecification-1.pdf
ATTACHMENT
GCC 2022
ATTACHMENT
ACS12.pdf
ATTACHMENT
JPOforearthworkdiggingwork-NER.pdf
ATTACHMENT
PPP-PMIorder21102024-11.pdf
ATTACHMENT
PreferenceMIIOrder2017RevisionOrder19July20241.pdf PreferenceMIIOrder
ATTACHMENT
ACS1to11_1.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_221_1.pdf
ATTACHMENT
PreferenceMIIOrder2017RevisionOrder19July20241.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .