08 BCD WGL 2022 -2023

Amount

White washing with lime to give an even shade : Old work (one or more coats) .

Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturer's specification. One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 32 mm dia

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore.

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length. 15 mm nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore.

Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107 mm long. Weighing not less than 110 gms.

Cleaning of Septic tank by mechanical means including disposal of sludge, slush etc., beyond muncipal limits.

Removing choke up in G.I. Pipe line of 15mm to 50 mm dia including removing G.I. union, coupling, wiring inside GI pipe for free flow of water etc complete a directed by the Engineer in charge.

Repairs to existing PVC flushing cisterns by replacing suitable internal siphon system set , knob and flushing rope etc., for proper functioning of cistern as per directions of Engineer-in-charge.

Cleaning of sewer lines, manholes etc., at all depths. cost includes all labour for removing the sludge, silt, slush, waste etc., from the manholes and rodding the sewer lines by mobile sewer roding equipment from manhole to manhole to clear the blockage, including chokes in gully traps etc.and disposing the waste outside the compound etc., complete.as per directions of Engineer-in-charge..i) Sewer line upto 150mm dia.( Rate for sewer line between two no.manholes to be measured for payment).

Cleaning of choked WCs (Indian/ European) and ensuring smooth flow etc., complete

Cleaning of nahni traps/floor traps at all levels for removal of blockages including removing the silt, slush, waste etc ensuring smooth flow etc and applying white cement in tile joints of bath/WC including water proofing compounds (Like forsroc) etc wherever required to arrest leakages etc.

Cleaning of the choked Gully trap Chambers and sewer line upto next manhole from the water entry outlet point in drainage system using rodding,wire/cables etc., to remove all the waste, debris etc., including disposal etc., as per the directions of Engineer-in-charge

Cleaning of existing sanitary pipe alignment of 150/100 /75 mm dia in vertical or Horizontal direction of existing all floors by opening door tee/ bend at each floor , clearing the deposited obstacles including rodding and refixing the doors with new rubber washer and jointing the same job includes replacing door covers, bolts and nuts wherever required to arrest the leakage all as per directions of Engineer-In-Charge. (Each opening of door bend and removal of blockages including above operation will be measured as one job.)

Cleaning of existing over head tank/ underground water storage tank by mechanical method of specified TANKCLEAN process in stages: (1) Empty the tank/ sump and make it to near dry, (2) wash the tank internal surfaces and top of the tank with fresh water and clean/ rinse the inside surfaces of side walls, ceiling and floor surfaces perfectly by removing all scalling, fungus etc., with rotary jet mechanism, (3) Removing/ cleaning mud, silt, waste, sludge and garbage from the tankwith sludge pump/ vaccum cleaner and disposing outside the building, (4) After drying applt UV radiation with specified equipment in the tank for 15 minutes to kill the harmfull bacteria etc., complete all as per directions of the Engineer-in-charge. (The rate includes filling of outlets of tank with cotton during cleaning marking of date of painting on the tanks and cleaning of all the dirt/ waste etc., from the terrace and submission of certificate from specialised agency).

Providing and filling cement motar sanded grout mixed with Fosrock liquid water proofing compound in required quantity for grouting/filling around the gaps of IWC,floor traps sides and inside traps including finishing the sides neately and grouting in holes at door bottoms etc., complete in the toilet rooms to fill the holes terrazo/ ceramic flooring tiles,around the W.C.pans, corners of rooms, floor trap openings after neatly cleaning/ scraching the joints etc., in all floors complete as per directions of Engineer-in-charge. (No. of bath/WC rooms shall be measured for payment).

Cleaning floors of all rooms Dadoing in kitchen and Toilets & including Kitchen platform of all types of quarter excluding toilets with cleaning liquids and water etc., complete and as directed by the Engineer-in-charge.

Providing and fixing CPVC brass ball gate valve of approved quality: 25 mm nominal bore