Cluster -1 The work for the construction of new 11 KV Feeder and its associated LT Lines for separating the agriculture and rural load in exiting 11 KV Feeders at different 33/11 kv substations in Bulandshahr zone (District Bulandshahr and Hapur)

Amount

11kV New Line on 8.5 Mtr. PCC Pole with ACSR Rabbit Conductor

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

V-Type Cross arm for 11KV Line, 65x65x6 mm, GI Angle

Cross arm holding Clamp with nuts & bolts

11KV `F' Bracket with N&B

Supply of ACSR Rabbit Conductor

Erection of ACSR Rabbit Conductor

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

11KV MS Danger Board with clamp, bolts & nuts

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

PG Clamps

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Aluminium Jointing Sleeves

G.I. Barbed Wire

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 16 SWG

Eye Bolt

Turn Buckle

11kV 'E' Bracket with N&B

GI Top Channel 100x50x2240 mm.With Clamp and NB and washer

GI Angle 65x65x6 mm, 2700 mm long bracing complete with clamps, Nut, bolt and washers

GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer

GI Channel 100x50x6, 1525 mm long ,with clamp, nut,bolt and washer

Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc.

Concreting of Pole/Support as per TS

11kV New Line on 8.5 Mtr. PCC Pole with ACSR Weasal Conductor

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

V-Type Cross arm for 11KV Line, 65x65x6 mm, GI Angle

Cross arm holding Clamp with nuts & bolts

11KV `F' Bracket with N&B

Supply of ACSR Weasal Conductor

Erection of ACSR weasal Conductor

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

11KV MS Danger Board with clamp, bolts & nuts

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

PG Clamps

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Aluminium Jointing Sleeves

G.I. Barbed Wire

GI Wire 6 SWG

GI Wire 8 SWG

GI Wire 16 SWG

Eye Bolt

Turn Buckle

11kV 'E' Bracket with N&B

GI Top Channel 100x50x2240 mm.With Clamp and NB and washer

GI Angle 65x65x6 mm, 2700 mm long bracing complete with Clamps, Nut, bolt and washers

GI Channel 100x50x6 mm. 1300 mm long with clamp, nut,bolt and washer

GI Channel 100x50x6, 1525 mm long ,with clamp, nut,bolt and washer

Guarding angle 75x75x6 mm, 1600 mm long with holding clamp, packing piece, nut & bolts etc.

Concreting of Pole/Support as per TS

New LT Line on ACSR Weasel Conductor on 8.5 Mtr. PCC Pole

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

LT clamp with nut and bolt for PCC pole

LT Shakle Insulator 100x115 mm With Nut and Bolt

Supply of ACSR Weasel Conductor

Erection of ACSR Weasel Conductor

Aluminium Jointing Sleeves

Earthing complete with M.S. Earthing Rod 20x2500 mm. & GI wire 6 SWG

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Concreting of Pole/Support as per TS

Guarding angle 75x75x6mm.1600 MM long with holding angle

G.I Wire 6 SWG along with span

G.I Wire 8 SWG

G.I Wire 16 SWG for winding

Eye Bolt

Construction of new 100 KVA, 11/0.433kV Distribution Transformer S/S

11/0.44 kV 100 KVA Transformer (Level-I) as per specified in T.S.

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Channel 100x50x2240mm (For TPMO,LA and Fuse set)

Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with clamp and washers as per TS

11kV TPMO complete set

11kV DO Fuse Set (3 Phase)

11kV Lightening Arrestor (Set- 3 No)

G.I. Barbed Wire

11kV MS Danger Board with clamp, bolts & nuts

SMC Distribution box as per technical specifications for 3 Ph 100 KVA DTR

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per TS

LT PVC Cable 3.5x150/70 Sq.mm.

ACSR Weasel Conductor

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

GI Channel 100x50x2028mm (For Distribution box))

Concreting of Pole/Support as per TS

Construction of new 63 KVA, 11/0.433kV Distribution Transformer S/S

11/0.44 kV 63 KVA Transformer (Level-I) as per specified in T.S.

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Channel 100x50x2028mm (For TPMO,LA and Fuse set)

Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers as per TS

11kV TPMO complete set

11kV DO Fuse Set (3 Phase)

11kV Lightening Arrestor (Set- 3 No)

G.I. Barbed Wire

11kV MS Danger Board with clamp, bolts & nuts

SMC Distribution box as per technical specifications for 3 Ph 63 KVA DTR

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe)

LT PVC Cable 3.5x70/35 Sq.mm.

ACSR Weasel Conductor

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

GI Channel 100x50x2028mm (For Distribution box))

Concreting of Pole/Support as per TS

Construction of new 25 KVA, 11/0.433kV Distribution Transformer S/S

11/0.44 kV 25 KVA Transformer (Level-I) as per specified in T.S.

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

GI Top Channel 125x65 mm, 2240 mm with clamp, bolts, nuts and washers

GI Channel 100x50x2240mm (For TPMO,LA and Fuse set)

Holding Clamps for Top Channel TPMO & Fuse Set etc. with nuts, bolts & washers

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

11kV Polymer Disc Insulator T&C type 45 KN

Disc Fittings T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers

11kV TPMO complete set

11kV DO Fuse Set (3 Phase)

11kV Lightening Arrestor (Set- 3 No)

G.I. Barbed Wire

11kV MS Danger Board with clamp, bolts & nuts

SMC Distribution box as per technical specifications for 3 Ph 25 KVA DTR

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per TS

LT XLPE insulated unarmoured 4x25 Sq. mm. Cable

ACSR Weasel Conductor

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

GI Channel 100x50x2028mm (For Distribution box))

Concreting of Pole/Support as per TS

Installation of 11 KV Outgoing VCB for Feeder Segreration

11KV Outgoing CTR 400/200/5A 350 MVA

11 KV rearrangement for connecting new 11 KV VCB with existing 11 KV Switch gear (Adoptor Panel)

11kV 3x185 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

Heat Shrinkable indoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

11 Mtr. Long Steel Tubular pole 410 SP 55

GI Top Channel 100x50x2240 mm.

11 KV Polymer Disc Insulator T&C type 45 KN

Disc Fitting T&C type 45 KN

11 KV Composite Polymer Pin Insulator with Nut and washers

P.G. Clamp for ACSR Dog/Raccoon

11kV 'E' Bracket with N&B

11kV MS Danger Board with clamp, bolts & nuts

11kV Lightening Arrestor (Set- 3 No)

G.I. Barbed Wire

Aluminium Paint

Red Oxide Paint

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

GI Strip 50x6 mm

G.I. Pipe 6" dia .

Laying of 11 KV Cable including cost of Sand & Bricks

Concreting of Pole/Support as per TS

PVC 4x2.5 sq mm (Cu)

PVC 2x2.5 sq mm (cu)

Control Room Extension

Extension of existing substation control room building,Control Room size 6x6 mtrs.( as per annexure attached in tender documents.)

11 KV Railway Crossing

11 Mtr. Long Steel Tubular pole 410 SP 55

Stone Pad (300x300x75mm)

11kV 3x185 mm2 XLPE Cable

Top channel 125x 65 mm 3200 mm (10,7kg/m)

M.S Angle iron 65x65x6 mm 4300 mm long bracing with clamp

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

Laying of HDPE Pipe underground minimum 3 meters below the Railway track by HDD Method along with laying of 11 KV 3x185 Sqmm. XLPE Cable in G.I. Pipes.

HDPE Pipe (6" dia.) for laying UG below the Railway track by HDD Method.

G.I. Pipe 6" dia. with Clamps

11 KV Polymer Disc Insulator B&S type 70 KN

Disc Fitting B&S type 70 KN

P.G. Clamp for ACSR Dog/Raccoon

11kV MS Danger Board with clamp, bolts & nuts

G.I. Barbed Wire

Aluminium Paint

Red Oxide Paint

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Concreting of Pole/Support as per TS

Railway Crossing Documentation, Land and Approval Fee etc. (Payment shall be done as per actual)

Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying of 11 KV XLPE cables

Laying of 11 KV XLPE Cable in trenches and in G.I. Pipe on double pole

Number plate

11 KV Polymer Pin Insulator

Cable Route Marker

NHAI/State Highway Crossing

11 Mtr. Long Steel Tubular pole 410 SP 55

11kV 3x185 mm2 XLPE Cable

Heat Shrinkable outdoor type termination kit suitable for 11kV XLPE 3x185 Sq.mm. cable size

HDPE Pipe for cable laying (Pipe to be laid by HDD Method)

G.I. Pipe 6" dia .

Laying of 11 KV XLPE Cable underground in trenches/ pipes.

Laying of 11 KV XLPE Cable in G.I. Pipe on double pole

Top channel 125x 65 mm 3200 mm

M.S Angle iron 65x65x6 mm 4300 mm long bracing with clamp

11 KV Polymer Disc Insulator B&S type 70 KN

Disc Fitting B&S type 70 KN

P.G. Clamp for ACSR Dog

11kV MS Danger Board with clamp, bolts & nuts

G.I. Barbed Wire

Aluminium Paint

Red Oxide Paint

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Concreting of Pole/Support as per TS

NHAI/State highway crossing documentation, land charges and approval fee etc. (Payment shall be done as per actual)

Road Restoration (Foot Path )charges

Bolts Nuts & washers

Aluminium winding wire - 6 SWG

Construction of New LT Line on (3x50 + 1x35 +1x16)sq. mm LT ABC Cable

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

Earthing complete with M.S. Earthing Rod 20x2500 mm. & GI wire 6 SWG

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Dead End clamp (Insulated)

Suspension clamps with I-Hook (Insulated)

Pole Clamps with nut & bolts for laying ABC

LT Insulating Piercing Connector (16sq.mm) suitable for street light

Insulating Piercing Connector (120-50 sq.mm -50-35 sq.mm)

SMC LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections

Supply of LT ABC of 3x50+1x35+1x16 sq. mm

Erection of LT ABC of 3x50+1x35+1x16 sq. mm

1x35 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

1x16 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the street light

End cap for LT AB cable

PG Clamps

Concreting of PCC Pole/Support as per TS

Construction of New LT line on (3x95 + 1x70 +1x16)sq. mm LT ABC Cable

PCC Pole, 8.5 Mtr. Long

Stone Pad (300x300x75mm)

Earthing complete with M.S. Earthing Rod 20x2500 mm. & GI wire 6 SWG

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Dead End clamp (Insulated)

Suspension clamps with I-Hook (Insulated)

Pole Clamps with nut & bolts for laying ABC

LT Insulating Piercing Connector (16sq.mm) suitable for street light

Insulating Piercing Connector (120-50 sq.mm -50-35 sq.mm)

SMC LT distribution boxes/kiosk, 3 phase on the LT Poles including all clamps & material required for mounting connections

Supply of LT ABC of 3x95+1x70+1x16 sq. mm

Erection of LT ABC 3x95+1x70+1x16 sq. mm

1x35 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

1x16 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the street light

End cap for LT AB cable

PG Clamps

Concreting of PCC Pole/Support as per TS

Overhead crossing of existing HT Line

13 meter STP Pole-SP-70

X-arm MS Angle 65X65X6mm V-Type 11 KV

Cross arm holding clamps with bolts & nuts

11 KV polymeric Pin Insulator

F-bracket for fitting top insulator with bolts & nuts

Danger Plate with clamps & bolts

Aluminium paint

Red oxide paint

Number marking on Pole with paint

Barbed wire GI

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Concreting of STP 13 M supports (@.63 Cu Mtr per pole)

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Overhead crossing of existing LT Line

11 meter STP Pole-SP-55

X-arm MS Angle 65X65X6mm V-Type 11 KV

Cross arm holding clamps with bolts & nuts

11 KV polymeric Pin Insulator

F-bracket for fitting top insulator with bolts & nuts

Danger Plate with clamps & bolts

Aluminium paint

Red oxide paint

Number marking on Pole with paint

Barbed wire GI

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers , Stay Calmp and Guy Insulator as per approved Drawing and TS

Stay Wire 7/10 SWG

Concreting of STP 11 M supports (@.44 Cu Mtr per pole)

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Additional items that may be required for completion of work

9 MTR STP Pole

3x120 sq. mm 11 kV AB Cable

11kV Polymer Disc Insulator with Fitting for 11 KV ABC

11kV Polymer Disc Insulators with I-Hook

Heat Shrinkable 1 ph. termination kit outdoor for 11 kV 3x120 Sq. mm. AB Cable

Spacers LT PVC

LT Insulation Piercing Connectors of 95/50 sq. mm - 70/35 sq. mm (For messenger wire jumpering & energizing DB neutral)

On/Off switch for street light connections

Height raising channel 100X50,2240 mm long

Back clamp for height raising channel holding clamps with bolts & nuts

AMIT ENGINEERING CORPORATION (BID ID -4705523)

AARVANSS BUILDWELL AND INFRACON LLP (BID ID -4681288)

Fabrico India Pvt. Ltd, (BID ID -4705046)