SPL REPAIRS TO EXTERNAL ELECTRIC SUPPLY OF ANNEXE BLDG AT JALIPA AND SPL REPAIR TO HIGH MAST LIGHT AND EXTERIOR OIL PAINTING TO BLDG NO P74 AT JASAI AND CERTAIN PROVN WKS OF EXTERNAL ELECTRIC SUPPLY TO NEW WARDS OF 177 MH AT JALIPA UNDER GE A BARMER

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plain area and not exceeding 1.5m deep in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply and spreading clean dry sand ( tibba sand) in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.

M&L 40 to 50mm thick rough dressed Jodhpur type stone slab cover 25 to 30 cm wide and not less than 60 cm in length, laid dry abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cable protection complete all as specified and as directed.

Supply and laying un-reinforced pre-cast concrete cable cover, class LV, Type-1 flat, size 250mm x 150mm x 40mm as mechanical protection to underground cables laying with length of the cable cover equal to the width of the trench complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roads/pavings/Hardstanding exceeding 10cm thick and including cutting/dismantling exisitng raods/pavings/Hardstanding disposal of debris complete all as specified and as directed. Note : Excavation require beneath the road cutting shall be measured and paid separately.

S&F GI tubing 40mm bore light grade with all fittings and laid in trenches under road / paving portions etc, for protection of cable complete all as specified and as directed.

S&F GI tubing 40mm bore light grade with all fittings and laid in trenches under road / paving portions etc, for protection of cable complete including taking down the existing unserviceable GI tubing all as specified and as directed.

S&F GI tubing , light grade of 40mm bore with fittings fixed to wall / pole protection including clamping of pipe with MS flat of size 50X5mm including nut, bolt & washers of size 50X12mm whereever required complete all as specified and as directed.

S&F GI tubing , light grade of 40mm bore with fittings fixed to wall / pole protection including clamping of pipe with MS flat of size 50X5mm including nut, bolt & washers of size 50X12mm whereever required complete including taking down the existing unserviceable GI tubing all as specified and as directed.

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 4 core 16 sqmm complete all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 4 core 16 sqmm complete including taking down the existing unserviceable LT cable all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 3.5 core 120 sqmm complete including taking down the exisitng unserviceable LT cable all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 3.5 core 35 sqmm complete including taking down the exisitng unserviceable UG cable all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 2 core 10 sqmm complete including taking down the exisitng unserviceable UG cable all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

Supply, install, commission and testing facory made sheet metal enclosure TPN copper bus bar box, outdoor type made out of CRCA sheet of 3.15mm thick , outdoor canopy type, CPRI approved , conform to IS-8623, IP-54 class protection, floor mounted, dust and vermin proof,front and rear operated door, mounted on MS angle iron frame work of size 40X40x6mm ,with necessary locking arrangement and duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally and fixed 0.5m above ground level and 0.3m grouted in ground / floor including necessary excavation/ earth work in any type of soil, foundation PCC 1:4:8 type D2 and the panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete with suitable capacity of copper bus bar 200Amp TPN with suitable size of PVC insulated copper conductor, thimbles glands complete including taking down the exisiting old unserviceable TPN copper bus bar box etc., all as specified and directed with the following accessories :- (a) MCCB 63 Amp FP, 10 KA (Incoming control) (b) MCB 40 Amp SPN -04 Nos (Outgoing control)

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete including taking down the existing unserviceable earthing all as specified and as directed. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Earthing complete with galvanized steel earth plate electrode 60cm X 60cm X 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized GI earth strip 32mm x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron mild steel all as shown in Electrical Plate No. 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40mm bore light grade pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal / salt, funnel etc complete all as specified and as directed.Note : - (i) The concrete pit shall be PCC 1:3:6 type C-1, 40mm thick pre-cast cover slab of RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, reinforced with 8mm TMT bars @ 10 cm c/c on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in Electrical Plate No. 3 of MES SSR Part-I, (ii) Item includes the cost of GI pipe up to 7.50m for protection of earth wire/strip, (iii) Item includes the cost of earth lead wire/strip up to7.50m & (iv) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate quoted.

Earthing complete with galvanized steel earth plate electrode 60cm X 60cm X 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized GI earth strip 32mm x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron mild steel all as shown in Electrical Plate No. 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40mm bore light grade pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal / salt, funnel etc complete including taking down the existing unserviceable earthing all as specified and as directed.Note : - (i) The concrete pit shall be PCC 1:3:6 type C-1, 40mm thick pre-cast cover slab of RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, reinforced with 8mm TMT bars @ 10 cm c/c on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in Electrical Plate No. 3 of MES SSR Part-I, (ii) Item includes the cost of GI pipe up to 7.50m for protection of earth wire/strip, (iii) Item includes the cost of earth lead wire/strip up to7.50m & (iv) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate quoted.

M&L for complete removal of existing treatment including preparation of wall surfaces and applying two coats of exterior acrylic emulsion paint (Colour or shade as approved by GE) over and including a coat of primer over application of wall care putty not more than 3mm thick at any location and an average thickness of 1mm to obtain smooth and plain suface as per manufacturers instruction complete including cleaning of window glasses, joinery, electric fittings, wiring, etc of drops and splashes and cleaning premises to obtain clean and tidy premises etc, complete all as specified and directed Make : Apex ULTIMA/Berger weater coat ALL GUARD including necessary steel scafolding

M&L for preparation of new surfaces of walls including cornices, pillars, etc (plastered or unplastered) by brooming or steel wire brushing, scrapping and applying two coats of exterior acrylic emulsion paint (Colour or shade as approved by GE) over and including a coat of primer over application of wall care putty not more than 3mm thick at any location and an average thickness of 1mm to obtain smooth and plain suface as per manufacturers instruction complete including cleaning of window glasses, joinery, electric fittings, wiring, etc of drops and splashes and cleaning premises to obtain clean and tidy premises etc, complete all as specified and directed Make : Apex ULTIMA/Berger weater coat ALL GUARD including necessary steel scafolding

M&L for complete removal of existing treatment including preparation of wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

M&L for complete removal of existing treatment including preparation of steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish to out side MD land complete all as specified and as directed.

Supply & fix IP-66 in repair PDC flood light aestheticlly designed with better thermal managment heat resisitant termpered glass for protection with 10 KV surge protection, applicable for large area lighting complete all as specified and directed. Make : CROMPTON Cat Part No. LFLN-180-CDL/60 or Techno commercially equivalent model of make Havells/Philips/Bajaj

S&F GI tubing 50mm bore light grade with all fittings and laid in trenches under road / paving portions etc, for protection of cable complete including taking down the exisitng unserviceable GI tubing all as specified and as directed.

S&F GI tubing 80mm bore light grade with all fittings and laid in trenches under road / paving portions etc, for protection of cable complete including taking down the exisitng unserviceable GI tubing all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions and finished the surfaces fair and ever complete all as specified and as directed.

M/S JOGARAM SUJARAM JASSAI

M/S TANUSHREE CONSTRUCTION COMPANY