A/R and M/O Himachal Sewa Sadan Sector-25(W) Chandigarh

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand).as per the diraction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge .

Removing dry oil bound distemper, water proofing cement paint and like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Applying Birla white putty wall care putty over plaster surfaces after thoroughly brushing the surface fre mortar drops,dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts and all incidental charges.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work complete as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete as per the diraction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge .

Painting two coat on new wood and wood based surface with enamel paint other than white to give on even shade including cleaning the surface of all dirt, dust and other foreign matters sand papening and stopping for all floor including carriage of materials labour tool and plants through all modes of transportation with in all leads and lift and as per PWD specification of 1990volume-1 and as per dircation of Engineer in charge .