WBPWD/EE/HED/NIT- 47 of 2025-2026

Part: A----EI Work

Supply & Delivery of 1.1 KV XLPE Insulated & PVC Sheathed Armoured Aluminium power cables [ Make Gloster /Polycab /Havells /Mescab /Finolex /RR cable] as per choice of EIC.

4 Core 50 Sq. mm [from new panel to new HTPNDB]

Laying of cable 4 Core 50 Sq. Mm sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables.

4 Core 50 Sq. mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 Core 50 Sq. mm

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.[Make:Legrand/L&T/ABB(E)]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS [Make-Legrand/L&T/ABB(E)]

100 A FP (TPNDB Incomer)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. [Make-Legrand/L&T/ABB(E)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Polycab/Havells/finolex/gloster) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.

2 x 4 sqmm + 1 x 2.5 sqm ECC

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Part: B----SITC of Room Air Conditioner

Supply & Delivery of inverter type Split Air Condition machine having cooling capacity not less tan 6900W, ISSER 3.8 to 4.39, BEErating not less than 3 star, Noise Level not more than50db. This split Air Conditioning machine fittedwit rotarycompressors,LCD remote & all other accessories suitable for Refrigeration R32/R410A. [O-General/Daikin /Hitachi/MitsubishiElectric/Mitsubishi Heavy duty industries as per approved by EIC/authority).

Installation,testing & commissioning of the above said split Acs incl. supply & fixing required Angle Iron Structure on wall for placing outdoor unit & mending good the damges as per direction of E.I.C

Supply & Fixing of HVAC grade 5/8" (for suction) & 1/4" (for discharge cu refrigerent pipe with 9 mm thick nitrile rubber insulation incl saddle,screw,insulation tape,fastner etc for above ac machine as per direction of EIC.

Supply & Laying 1.1KV,grade,3 core 4sqmm flexible copper cable with screw, saddle, drill macchine, nut bolt etc all necessary items needed for connection. (From starter to AC out door connection) (Make-Havells/KEI/polycab/Fenolex as per approved by EIC)

Supply & laying Drain water pipeing work out of PVC/HDPE pipes of 20 mm dia incl. Fitting accessories, bend,elbows, tees,flanges tapping wall sleeves, hangers, supports, anchors and with 9mm thick nitrile rubber insulation. (Make:HB/Supreme/Oriplast)

Part: C----EARTHING

Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the ground level(For Morrum Soil: ISI-Medium GI pipe)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F 4 SWG GI Solid (Hot Dip) wire of size on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

ADD GST @ 18%

ADD LWC @ 1%