DEMOLITION AND RECONSTRUCTION OF AIRMEN MESS AND BILLETS AT SITE P AT AFS THANE

Amount

NOTE: Schedule ‘A’ Part I to XIX are under Ser No. 1.00 to 19.00. are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out for Building / Structures as listed in Sch `A’ Part I.

Lump sum price worked out for Excavation,Earthwork And Site Clearance as listed in Sch `A’ Part II

Lump sum price worked out for Internal Water Supply as listed in Sch `A’ Part III

Lump sum price worked out for Internal Electrification as listed in Sch `A’ Part IV

Lump sum price worked out for Roads/Path/Hard Standing as listed in Sch `A’ Part V

Lump sum price worked out for Sewage Disposal as listed in Sch `A’ Part VI

Lump sum price worked out for Area Drainage as listed in Sch `A’ Part VII

Lump sum price worked out for External Water Supply as listed in Sch `A’ Part VIII

Lump sum price worked out for External Electric Supply as listed in Sch `A’ Part IX

Lump sum price worked out for Demolition as listed in Sch `A’ Part X

Lump sum price worked out for Fencing/ Gate / Retaining Wall as listed in Sch `A’ Part XI

Lump sum price worked out for Heating and Cooling appliances as listed in Sch `A’ Part XII

Lump sum price worked out for Fire Fighting as listed in Sch `A’ Part XIII

Lump sum price worked out for Lift as listed in Sch `A’ Part XIV

Lump sum price worked out for Lightening Protection as listed in Sch `A’ Part XV

Lump sum price worked out for Air Conditioning as listed in Sch `A’ Part XVI

Lump sum price worked out for Grease Trap as listed in Sch `A’ Part XVII

Lump sum price worked out for Fire Alarm System as listed in Sch `A’ Part XVIII

Lump sum price worked out for Additional Special Items for Buildings/ Structures as listed in Sch `A’ Part XIX

SCHEDULE 'A' PART - XX Fittings & fixtures is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6.

INTERNAL ELECTRIFICATION

Supply and fix bed side lamp fitting, 3 watt, 220 volts, AC complete all as specified and directed

Supply and fix 36/40 watt, 6000K rated CCT, aqua recess 2x2 recessed mounted, back-lit LED tile. with highly translucent wide window, opal diffuser and suitable for 600 x 600 mm modular/POP/gypsum ceiling complete all as specified and directed.

Supply and fix socket outlet, flush type, including sunken iron terminal box with 3mm thick bakelite sheet cover, concealed after cutting chases in wall complete all as specified and directed.

Supply and fix telephone socket outlet, 2 line, flush type, including sunken iron terminal box with 3mm thick bakelite sheet cover, concealed after cutting chases in wall complete all as specified and directed.

Supply and fix telephone rossette box, 10 way, iron terminal box, 1.2mm thick cover, fixing in wall complete all as specified and directed.

Supply and fix telephone rossette PVC box, one way, fixing in wall complete all as specified and directed.

Supply and laying telephone CAT 6 wire, 10 pair, PVC insulated unshielded twisted, tinned, copper conductor cable having single strand of 0.8mm dia for network connection complete all as specified and directed. Note: Rigid non metallic conduit pipe and fittings will be measured and paid separately

Supply and laying TV coaxial RG-5, heavy duty, PVC insulated sheathed cable with copper conductor having single strand of 0.7mm dia and copper wire net for TV antenna from terminal boxes to TV socket complete all as specified and directed. Note: Rigid non metallic conduit pipe and fittings will be measured and paid separately

Supply and fix TV socket outlet type for electrical fitting flush type, including sunken iron terminal box, 3mm thick bakelite sheet cover connected after cutting chases in wall complete all as specified and directed.

Car size-1100 mm wide x 1300 mm deep x 2300 mm. Car Enclosures-Standard manufacturing with MS frame & stainless steel sheet not less than 1.5 mm thick with hair line finish (N-304), having stainless steel false ceiling with hairline finish, internal lighting arrangement with LED light fitting complete, internal vantilation system provided with concealed arial flow/cross flow fan with auto cut of system and stainless steel grill/wire mesh for protection. False Ceiling-Stainless steel 1.0 mm thick, fitted with raw of small LED Lamps. Flooring-Aluminium chequered plate 3 mm thick. Car door-Automatic center opening with VVVF door drive, opening size 800mm x 2000mm, sliding type, fabricated by stainless steel sheet not less than 1.2 mm thick having hairline finish (N-304). Landing doors-Automatic center opening with VVVF door drive, opening size 800mm x 2000mm, sliding type, fabricated by stainless steel sheet not less than 1.2 mm thick having hairline finish (N-304). Door opening-800 x 2000 mm clear Opening. Door operation-Automatic. Hoist way construction-Made of RCC requre.

Auto Door Sensor-Infra Red. Pit-1600 mm require. Over head-5200 mm require. Guide-Machined Tee For Car 89 x 62 x 16 mm for car and 70 x 65 x 9 for counter weight. Safety devices-(1) Automatic Rescue Devices in case of power failure, by hydraulic self release (2) De-locking door and rescue the stuck up passenger. Signals- (1) Combined luminous hall buttons with LED hall Position indicators. (2) LED Car position indicator in car.(3) Car operating panel with luminous Touch button.(4) Battery operated alarm bell and emergency light along with 180AH, 12 Volts rechargeable battery.(5) Overload warning feature in car. Guarantee Period-One year from date of completion of project.

HEATING & COOLING APPLIANCES

Supply, fix, installation, testing and commissioning of refrigerator, of capacity 310/320/340 Ltr electric driven, single phase, AC supply, 230 Volts, 50Hz comprising of all components, outdoor condensing unit, indoor Freezer box, Vegetable tray, PVC frame as recommended by manufacturers, confirming to Bureau of Energy Efficiency (BEE) not less than 3 Star rating complete including initial charging of refrigerant eco friendly as specified and recommended by manufacturer complete all as specified and directed.

EXTERNAL WATER SUPPLY

Supply, laying, jointing and testing ductile Iron pipe, with and including tyton joint, of spigot and socket end, centrifugally cast spun pipe, class K-9, conforming to IS-8329-2K, in any length, of size 100mm bore, laid in trenches complete all as specified and directed. Note: DI fitting will be measured & paid seperately.

Material and labour for making connection by cutting existing CI/DI main, 100mm dia, under ground pipe, including inserting tee 100x100x80mm and CI collar, including necessary earth work in any type of strata, jointing and jointing material complete all as specified and directed. Note- CI fitting shall be measured and paid separately.

Material and labour for construction of for Valve Pit /Chamber in PCC solid block masonry (1:3:6) built in CM 1:6, over 150 mm thick PCC foundation 1:3:6 type C2, 10mm thick internal CM 1:6 & 12mm thick external plaster in CM 1:4, provided with 3 mm thick MS sheet cover and MS angle iron 40MMX40MMX6MM chamber frame fixed in coping in PCC 1:2:4 type B-1 with locking arrangement and handle, painting of MS work with one coat of red oxide primer and two coats of synthetic enamel black paint complete including excavation & earth work in any strata complete all as shown on drawing No.CEAA/TD/57sheet No 1.1, dated 28.05.92, amended upto 31.12.92, of internal size 1050mm(L) x 750mm(B) x 1000mm (D) complete all as specified and directed.

Supply & fix, DI fitting, confirming to IS, upto 100mm bore pipe line for reducing/bends (any type radius and angle), tapers, any type, straight, bend, increasing, decreasing or double socketed extra tee pieces, single branch, Y junction, double branch, cross collars cap etc complete all as specified and directed.

Material and labour for boring of holes under road, pavement, hard standing by trenchless technology, using ultra sounding technique and necessary machine including laying of HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply & fix Mono block centrifugal pump set, three stage self priming, electric driven, 415 volts, 3 phase suitable complete with all fixing arrangement of capacity 7.5 HP, 52 metre head, 1440RPM with water discharge 81 litre per minute, 5.1 Kg/cm2 complete all as specified and directed.

Supply laying, jointing, testing and commissioning XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) earthed cable copper conductor size 4 core of 6 sqmm, 1100V grade (Earthed) with stranded complete all as specified and as directed.

EXTERNAL ELECTRIFICATION

Material and labour for boring for road crossing in any kind of soil/ rock strata complete all as specified and directed.

Supply and fix copper conductor FRLSH PVC sheathed multistranded flexible cables 1.5 sqmm 3 core round/ flat, 1.1 KV as per IS: 694 complete all as specified and as directed.

Material and labour for FRP junction box, pole mounted of size 300x200x105 mm with 4 terminal inside the box suitable for three phase incoming cable, 3 phase out going cable and single phase connection for light fitting with controlled MCB SP-6 Amps -01 No enclosed in thermoplastic enclosed shock proof safe complete all as specified and as directed.

FIRE FIGHTING

Supply and erection of 12.5HP Star Delta Starter and Control Panel complete all as specified and as directed.

Supply & laying for Flow Switch for Sprinkler System 3 core x 4 Square mm PVC FRLSH cable for installation of Flow switch with Panel etc. complete all as specified and as directed.

Supplying and erecting of Pre fabricated M.S. structural steel supports such as angle, channel, plate etc. conforming to relevant IS standards for laying above ground Hydrant Pipes in Pump Room, Raiser, and hydrant and Sprinkler Systems etc. complete all as specified and as directed.

Providing, fixing, testing and commissioning of spring loaded relief valve suitable for pressure of 16 Kg/sq.cm including flanges, nuts, bolts and washer etc., and painting complete all as specified and as directed.

FIRE EXTINGUISHER

Supply, installation, testing and commissioning of following types of extinguisher with provision of wall bracket (fixed with anchor fastner). 2 Nos Panel room and 2 Nos Generator Room

(a) ISI marked (IS:2878) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg Flat base including valve, discharge hose of not less than 10mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 filled to a filling rate of not more than 0.667 and wall suspension bracket etc. complete all as specified and as directed.

(b) ISI marked (IS:2878) Fire Extinguisher, Carbon-di-oxide type capacity 2 Kg Flat base including valve, discharge hose of not less than 10mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 filled to a filling rate of not more than 0.667 and wall suspension bracket etc. complete all as specified and as directed.

(c) ISI marked (15683) Portable ABC Type 6 Kg Capacity Fire Extinguisher with SQEEXE Grip nozzle and complete in all respect including initial fill and wall suspension bracket etc. complete all as specified and as directed.

(d) Modular type 5 Kg capacity fire extinguisher complete all as specified and as directed.

(e) Supply and installation at approved location of approved make fire buckets of 24 gauge galvanised steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer (4 nos) etc complete all as specified and as directed.

(f) Supply, installation, testing and commissioning of following types of Trolley (Wheel) Mounted extinguishers “CO2” type Fire Extinguisher of 22.5 kgs capacity assembled out brand new cylinders with wheel valve arrangement; fitted with discharge hose and horn duly charged and ready for use manufactured to IS 2878 with ISI Mark etc complete all as specified and as directed.

FIRE ALARM SYSTEM

Supply, installation, testing & commissioning of 2x1.5 Sqmm copper armoured FRLS PVC Cable complete all as specified and as directed.

Supply, installation, testing & commissioning of 2x2.5 Sqmm copper armoured FRLS PVC Cable complete all as specified and as directed.

Providing and installing in position the following type of sign boards made out of 3mm thick “Opaque” PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, with mirrors fasteners complete all as specified and as directed.

(a) signages with printed " IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE", 1.5cm height letters in red with white back ground, size of board shall be 25cm x 30cm and shall be fixed at the height of 2mts from finished floor near Manual Call Points.

(b) signage with printed "Fire Alarm Points", 1.5cm height letters in red with white back ground, size of board shall be 25cm x 30cm and shall be fixed at the height of 2mts from finished floor near Manual Call Points.

Providing and fixing in position the signage of " Fire Extinguisher " to be pasted immediately above the every extinguisher, sticker type complete all as specified and as directed.

Providing and fixing in position signage of Floor indentification (i.e, GROUND FLOOR, FIRST FLOOR, 2ND FLOOR, … ETC.,) at each stair enclosure, on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground, size of signage shall be 15cm x 60cm complete all as specified and as directed.

Providing and fixing in position the signage of "Fire Hydrant & Hose Reel" to be pasted on door of the every fire shaft at all floors complete all as specified and as directed.

Providing and fixing in position the sign board of “ASSEMBLY POINT” complete with 1 mm thick rigid plastic board size of 400mm x 300mm to be fixed on ground by using a steel rod/ pipe at designated places complete all as specified and as directed.

Providing and fixing in position the signages "FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of 3' x 4' complete all as specified and directed and should contain the following matter:-

(A) Type-I comprising the following:- (a) Alert the security at security room by actuating manual call point located at strategic locations. (b) Evacuate the occupaints by using fire exits and emergency exits only and assemble at various assembly points. (c) If possible try to extinguish the fire by using nearest/ suitable portable extinguisher or water from nearest wet riser. (d) Be calm and fdo not give any room from panic, walk, do not run. (e) If you encounter serious difficulty in evacuation, flat and try to attract attention of rescue team

(B) Type-II comprising the following:- Action by security/ reception upon receipt of information through fire alarm or fire detectors or by using public address system. (a) Alert the occupants by using public address system. (b) Inform fire control through any one of the following phone No.xxxxxxxxx (c) Refer evacutation plan from evacuating standard people. (d) Guide the fire force, on their arrival to the seat of fire. (e) In case of the casualties, call ambulance by dialling number xxxxxx

Supply and fix PA system 12 zone complete all as specified and as directed.

Supply and fix Wall mount speaker complete all as specified and as directed.

Supply, Installation, Testing & Commissioning of 2 x 1 Sq.mm. Copper Armoured FRLSH PVC Cable etc complete all as specified and as directed.

Supply, Installation, Testing & Commissioning of 32mm PVC Conduit etc complete all as specified and as directed.

Supply, Installation, Testing & Commissioning of 4 x 1.5 Sq.mm. Copper Armoured FRLSH PVC Cable etc complete all as specified and as directed.

Supply, Installation, Testing & Commissioning of 2 way talk back speakers complete all as specified and as directed.

DEMOLITION

Taking down wiring 1.5/ 2.5/ 4/ 6 sqmm complete all as specified and directed

Taking down switches, sockets any type complete all as specified and directed

Taking down ceiling rose and fan regulators complete all as specified and directed

Taking down LT UG cable any size complete all as specified and directed

Taking down tubelight fittings any type complete all as specified and directed

Taking down building security light fitting any type complete all as specified and directed

Taking down ceiling fans and exhaust fans complete all as specified and directed

Taking down MCBs/ MCCBs complete all as specified and directed

Taking down DBs complete all as specified and directed

Taking down recess mounted lights complete all as specified and directed

Taking down CFL including holders complete all as specified and directed

Dismantling old unservicable airconditioner and depositing it to MES store yard complete all as specified and directed

Dismantling old unservicable water cooler and depositing it to MES store yard complete all as specified and directed

Dismantling old unservicable deep freezer and depositing it to MES store yard complete all as specified and directed

Dismantling old unservicable refrigerator and depositing it to MES store yard complete all as specified and directed

Dismantling old unservicable water heater and depositing it to MES store yard complete all as specified and directed

ADDITIONAL SPECIAL ITEMS FOR BUILDINGS/STRUCTURES

Supply and fix silver coated brass letters of any size and fixing over granite surfaces complete all as specified and directed.

NOTE : Amount of credit of Rs. 3,18,833.00 for retrieved materials is mentioned in schedule of credit on Srl Page No. 64(R) of tender documents in pdf form which will be deducted offline while acceptance of tender.

United Sales Corporation

Vishal Builders

MUKESH CONSTRUCTION CO

SANKALP INFRACON