REPAIR / REPLACEMENT OF LIGHT FITTING, DISTRIBUTION BOX, SUB MAIN WIRING AND OTHER ALLIED WORKS AT CQA (SV) UNDER GE DEHU ROAD

M & L for taking down unserviceable Meter box including all fittings and fixture complete.supply and installed meter box made with PVC heat radiant suitable for fixing electric meter 04 Nos and one MCCB 100 Amps TPN as incommer,Four out going MCB SPN 40 Amps ,IP-65 fitted with 04 no copper strip of size 30x6mm included necessary connection arrangement with suitable size of copper flexible cable from MCCB to Busbar and Busbar to MCB,Meter complet all as directed. .Make : Hensel.Cost included the MCCB,MCB Busbar,The existing meter will installed in the meter box.

Supply and installed outdoor main control box pillar box cannopy type with IP-55 protection,fabricated with 3.15 mm sheet of size 650mm x 600mm x275mm with 40mm angle iron fram 300 mm from ground leave, suitable for installed arrangement 160 Amps MCCB as incommer,out going 63-04 Nos with copper busbar made with 30mmx6mm copper strip on distribution board having front opening with proper locking arrangement size of the panel 600mm width,650mm hight and 275 mm width, complete all as specified and directed. Note: (a) MCCB/MCB will measure in respective items of schele "A". (b) Rate included the Copper bus bar.

M & L for taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, light fittings,outlet boxes etc.removing material for taking credit and making good disturbed surfaces with match colour of walls, floors, ceilings etc all as specified.

(a) One Light/Bell point controlled by one switch .

(b) One ceiling / Exhaust fan point controlled by one switch

(c) One Light controlled by two-way switch .

(d) One 3 pin 5 Amps socket outlet on independent board

(e) One 3 pin 5 Amps socket outlet on same board

All as per item No-4 above but with 2.5 Sqmm wire for 15 Amp socket outlet on independent board.