REPAIR/REPLACEMENT TO FENCING GATE SECURITY WALL DRAINS PATHS HARDSTANDING CULVERT AND OTHER B/R WKS AT ARC 11 WEU AND 58 GTC AT HAPPY VALLEY UNDER GE SHILLONG

Amount

M & L for Pre-cast cement concrete block masonry type C1 , 1:3: 6, 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement using mortar 1:6 including demolition of existing defeating PCC block masonry and removal of debries out side of MOD land complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 in two coats (10mm and 5mm thick) mixed with water proofing compound mixed with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: supply only water proofing compound shall be measured and paid separately.

Supply only water proofing compound complete all as per specified and as directed.

Taking down defective cement plaster including racking out joints, hacking for key scrubbing down with water etc and removal of rubbish material away from site outside MD load complete all as per specified and as directed..

M&L for 10mm thick rendering of work in CM (1:6) on fair faces of brick work or concrete surfaces finishing rendering even & smooth without using extra cement complete all as per specified and as directed.

M&L for preparation of new by plastered surfaces of wall and applying two coats of cement base paint over one coat exterior wall surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new by plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts if required and applying One coat cement base paint on surfaces of wall complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls including cornices, plasters etc and applying two coat of white wash complete all as specified and directed

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

M & L for PCC 1:3:6 , Type C2 using 40mm gradd stone aggregate for fixing of RCC/PCC post or similar type of works etc complete all as specified and directed by Eng-in-charge.

Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion from concrete, brick work, masonry etc., and making good disturbed surfaces to match to natural ground complete all as specified and as directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-500D complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and dircted.

M & L for Flat/angle iron fixed to posts to hold the chain link fencing complete all as specified and directed

M & L 10 mm dia round bars as holding bars for chain link fencing fixed at top and bottem, including linking one to another horigontal bar complete all as specified and directed.

S&F MS 10 to 12mm dia screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other ends each screwed end to be fitted with washers and one hexagonal or square nut exc 15 cm n.exc 22.5 cm long complete all as specified and directed

Fixing only chain link fencing including, line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire etc. including dismantling fencing wire mesh, any type complete all as specified.

Supply only chain link fencing any size or type MS Galvanised of 4kg per sqm in weight complete all as specified and as directed.

S&F in repair galvanised 2 strand steel barbed wire,exceeding 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provisioning of galvanised mild steel wire, staples of steel pins etc all as specified and directed (each line wire to be measured).

M & L to Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S & F 1.60mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

M&L for preparation of new surfaces of steel n. exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as per specified and as directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in hardstanding/path/ plinth prottection incl finishing even & smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-0 using (12.5mm graded stone aggregates ) as in levelling course under floor tiling complete all as specified and as directed.

M&L for chequered cement concrete tile with grey cement and pigment (of approved tint) of size 20 cm x 20 cm x 25mm thick laid over and including 15 mm thick screed bed in cement Mortar 1:6, set, jointed and pointed in neat cement slurry complete all as per specified and as directed.

M&L for Non-skid ceramic heavy duty exterior colour tiles (premimum / Special quality) 8-10 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Dismantling of stone slabs and tiles including granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as per specified and as directed at site.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with 0.5mm thick scratch proof lacquer coating on top surface , with grey cement and pigment complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded agg) 40 mm thick, as in floor and finishing cement conerete surface even and smooth with using extra cement complete all as specified and directed.

S&F glass dividing strip 3mm thick and 38 mm width, inserted in position confirming to design complete, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in surface channels and drains including necessary formwork complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 350X 450X 7mm thick as on vertical surfaces of walls such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick work or concrete surfaces finished fair and even on vertical surfaces of wall with wire marking complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for if (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cronking bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls set in cement mortar 1:6 complete all as specified and as directed. Note:- Reinforcement steel will be measured & paid sepratly.

M& L for Reinforced cement concrete (Nominal mix) as in slabs supported on walls, beams and columns ,Type B1, 1:2:4 (using 20mm graded stone aggregate) roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all specified and as directed.

Use and waste of formwork to soffits of suspended slabs rough finished flat surfaces of concrete flat such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Excavating in trenches , n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

M&L 450mm bore reinforced soft /loose soil cement concrete pipes, class NP2 embosing with date of manufacturing , laid and jointed with CM (1:3) including demolition and breaking up drain pipes (salt glazed and stone ware , AC or reinforced concrete pipe) removal of debrised to outside of MOD area complete all as specified and as directed at site.

All as per Ser No 44 above but 300mm bore complete all as specified and as directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, and ashlar facings,dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed.

M&L for PCC (1:4:8) type D-2(using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M&L for Walling of Random rubble, uncoursed , polygonal rubble walling brought up to course built in cement mortar (1:6) complete all as specified and as directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil complete all as specified and as directed.

Removing excavated materials (soil) to a distance n.exc. 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as direted.

M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggreagtes) including necessary form works as in precast bond stone shedet in CM (1:6) complete all as specified and as directed.

Extra over stone walling for Hammer dressing with maximum depression on face from straight edge held against the dressed surface of lime or sand stone n.exc 20mm complete all as specified and as directed.

M/L for raised pointing to random rubble stone masonary uncoursed or brought upto course in cement mortar (1:4) complete all as specified and directed.

M&L for PCC coping (1:2:4) type B-1 (using 20 mm graded aggregate stone aggregate) complete all as specified and as directed.

Loose filling with aggregates of guage 80 to 150 mm broken stone or boulders behind weep holes complete all as specified and as directed.

M&L Non-skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) , area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe and taking down complete all as specified and directed.

M/S SAMAL CONSTRUCTION

M/S MANOJ KUMAR BAL

Ms Amrik Singh Bahra

M/S. Ranjit Kumar

M/S UTTAM SAHA

M/S U.K ENTERPRISE

M/S P&R CONSTRUCTIONS

M/s Jaiswal and Co

M/s Sohini Construction