8734/E8 PROVISION OF CHEQUERED TILES, PAVEMENTS AND CHAIN LINK FENCING WITH HARD STANDING INFRONT OF TYPE 1 and TYPE 2 QUARTERS IN RESIDENTIAL AREA AT NAD SUNABEDA, ODISHA

Amount

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in hard/dense soil complete all as specified.

S & F Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engr-in-Charge.

M & L for Plain Cement concrete Type B2 (1:2:4) using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete all as specified and directed.

S & F for rolled flats for securing mesh as fencing post strut bend to shape holes drilled notches cut to receive MS bolts and barbed wire, embedded to concrete including tarring to steel work embedded to concrete necessary welding etc. conforming to Gde E-250 (Fe 410-W) quality `A’ ISI marked (IS-2062) complete all as specified.

S & F for 10mm dia mild steel round bars as in tie bars fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S & F for Mild steel bolts nut washer (Machine made) with hexagonal head one end and screwed the other, or screwed both ends; each screwed end to be fitted with two washers and one nut hexagonal dia of shank n.exc 12mm and length of bolt exc 50mm but n.exc 100mm complete all as directed.

Supply only Chain link MS galvanisd fencing, using hot dip GI wire of size 3mm dia and size of mesh 100mmx100mm complete all as specified. Note:- Flat iron, round bars, nut bolts and washer shall be measured and paid for separately.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified. Note :- Supply only chain link fencing shall be measured and paid for separately.

Surface Excavation not exceeding 30 Cm deep and averaging 18 cm deep and getting out in hard/dense soil complete all as specified and directed By Engr-in-Charge.

Removing excavated material ( soils ) exc 250 mtr but n exc 500M and depositing where direced at a level n exc 1.5 m above the starting point all as specified and directed by Engr -in-Charge.

M&L hardcore of guage n.exe 63mm, deposited, spread and levelled in layers n.exe 15 cm thick, watered and rammed in two layers a true surface all as specified and directed by Engr -in-Charge.

M&L 100 mm thick PCC type C-2, (1:3:6) as in Sub-Base (40 mm garded aggregated) complete all as specified and directed by Engr -in-Charge.

M&L for 20-25mm decorative tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in Path, outdoor floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed By Engr-in-Charge.

M&L for precast cement concrete (1:2:4 type B1, using 20mm graded crushed stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match, set in CM (1:4) complete all as specified & as directed.

M&L for preparation of new or previously untreated steel and iron surfaces of any description not exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint (Ist quality) over a coat of red oxide primer complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

M/s Jai Sree Hari

VIJAYA ENTERPRISES