Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.4 LAccepted-Finance | 1 | Accepted-Finance L1 | |
| 2 | 2₹5.5 L+₹1.1 L (26.0%)Accepted-Finance | 2 | Accepted-Finance L2 | |
| 3 | 3₹5.6 L+₹1.2 L (28.1%)Accepted-Finance | 3 | Accepted-Finance L3 | |
| 4 | 4₹6.2 L+₹1.9 L (42.9%)Accepted-Finance | 4 | Accepted-Finance L4 |
Tender Value
₹6.3 L
EMD Value
₹12,529
Closing Date
15 Jul 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PBND, APWD, Port Blair
EE, PBND, APWD, Port Blair
Providing rubberwood partition and cubicals at Annex Building of Directorate of Industries under SD-III, PBND, APWD, Port Blair
2024_APWD_14557_1
NIT No. 08/EE/PBND/2024-25
Open Tender
Civil Works - Others
Item Rate
30 days
Port Blair
Please refer tender documents
4 documents required · 4 mandatory
₹0
₹12,529
18 Jul 2024
25 Jun 2024
16 Jul 2024
25 Jun 2024
15 Jul 2024
26 Jun 2024
26 Jun 2024 - 12 Jul 2024
Amount
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm
Dismantling rubberwood partition with panel/ glass panels and stacked with 50m lead as per the direction of Engineer-in-charge.
Removing rubber wood partition with doors including door fittings and fixtures and refixing the same in position all complete as per the direction of Engineer-in-charge.
Removing Cubicals (1.50x0.60x0.75) with computer table and refixing thesame in position all complete as pr the direction of Engineer-in-charge
Providing and fixing fabric polyster split type draw vertical blinds in windows with slat width 89mm and slat thickness 0.80mm of approved brand as per the direction of Engineer -in-charge.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
Two or more coats on Old work.
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length 15 mm nominal bore
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Semi rigid pipe 32 mm dia
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing CP brass two way bib cock (Jaquar Code No. FLR-504IN or equivalent) of approved quality.
15mm nominal bore
Providing and fixing health faucet with 1.2 m long flexable tube and wall hook (Jaquar or equivalent make) model : ALD573 of aproved quality.
15mm dia
Providing and fixing 100mm CP floor trap of approved quality.
Providing and fixing work table of size 1.53X0.68X0.75m with 18mm Rubber wood (Rubco huat wood or equivalent) and two coats of sanding sealer two coats of NC filler and melamine polish of desired shade i/c cost of all materials transportation charges all labour charges, minor tools etc as per ISO specification complete with the provision of one drawer and open able shutter with snap hinges and lock.
Melamine polishing on wood work (one or more coat).
Providing and fixing 7' high partially glazed partition with 2' glazed of 5mm thick glass in 2'' x 2'' wooden batten frame work with 12mm thick, panelling made of rubber wood superior quality chemically treated, edge glued finger joined processed as per ISO specification and finished with two coats of sanding sealer,2coats of NC filler and melamine polish of desired shade,including cost of all materials, transportation charges,labour charges and minor tools etc complete with flap door size 0.80x2.30cm, the sample brand to be used shall be approved/decided by the Engineer-in-charge prior to execution of work (as per the drawing enclosed).
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
Providing and fixing Work Table of size 2.40(L) x 1.80(B) x 0.75m (H) with 75 x 75mm thick rubber wood battens for legs at each corners & centre of table and sides with 100x75mm battens at top and 50x50mm at bottoms with 12mm thick coloured toughened glass at top surface including finished with two coats of melamine polishing over a coat of honey natural colour wood filler putty etc including preparation and applying sand paper and finishing to a glory matt finish that cost of all materials of transportation, labour charges and minor tool etc as per ISO specification complete, the same brand to be used shall be approved/ desired by the Engineer-in-charge bear to execution of work.
J M S CONSTRUCTION
A J ENTERPRISES
C AJAIYA KUMAR
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .