PROVISION OF PANTRY AT GONDWANA AT VSN NAGPUR

Amount

Excavation in trenches n.exc 1.50 m wide & n.exc 1.50 m deep for foundation etc or for shafts wells cesspits ,manhole pier holes etc n exc 10 sqm on plan and n exc 1.5 m depth and getting in hard/dense soil complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and demolished meterial to be removed out side of MD land complete all as specified and directed.

Demolition of brick work/ stone boulder masonry built in cement mortar in any position complete all as specified and directed.

Material and labour for Cement Concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) in foundation, sub base, below paver block, filling and mass concrete etc complete all as specified and as directed.

Material and labour for Brick work with fly ash old size bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Material and labour for providing ,cement concrete type B1 (1:2:4) using 20 mm graded aggregate ,in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses string courses parapets and railing upto 60 cm height copings, kneelers, apex stones, bed plates and similar complete all as specified and directed.

Material and labour for RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

All asper item No 7 above but for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

All asper item No 7 above but for Chajjas

Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces complete all as specified and directed.

All asper item No 10 above but to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal and sloping) for fair finished surfaces.

All asper item No 10 above but to chullah hoods, chajjas, troughs and similar items including edges fair finished surfaces.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. or securing with complete all as specified and directed.

All asper item No 13 above but 5 mm dia & over upto & incl 10 mm dia in stirrups

Material and labour for rendering 15 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick/concrete wall surfaces, finished even including mixing integral waterproofing compound complete all as specified and directed. Note: WPC measured and paid separately

Supply only integral waterproofing compound

Material and labour for preparation of new plastered surfaces of walls and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed at any height incuding necessary scaffolding if required at site complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm for any types of soil complete all as specified and directed.

Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for providing 10-12 mm thick Plaster of Paris (POP) false ceiling (gypsum anhydrous) to flat or curved surface as per design approved over GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer’s instructions including two coats of oil bound distemper over a coat of primer over a coat of putty complete all as specified and directed.

Material and labour for hard core of broken stone or boulders of gauge n exc 63 mm depossted, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Material and labour for for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggr) as in foor complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fixing any shade/double charged/ultracharged vitrified tiles 10 mm thick (square/ rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm in floors, parking etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in dark shade including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour for premium quality digital glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 600 x 300 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface all as specified and directed.

Material and labour for for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like incl 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and directed.

Material and labour for Providing ,cement concrete type C1(1:3:6) using 20 mm graded aggregate ,in lintel upto 1.5m clear span ,cills,steps, seismic and other similar bands,plinth protection, string courses parapets and railing upto 60 cm height coping and similar complete all as specified and directed.

Supply and fixing of stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union of overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing of stainless steel plate rack (wall mounted) as in kitchen of size 30 inch x 36 inch x 8 inch complete all as specified and directed. Note : - Pattern of plate rack shall be approved by GE

Supply and fixing decorated type angular stop cock with wall flange complete all as specified and directed. Make: Jaquar Model No-FLR-5053N and equivalent range in Marc Kohler/ Hindware as per approved by GE.

Supply and fixing PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

Supply and fixing decorated type chromium plated sink mixer with regular spout complete all as specified and directed.

Supply and fixing decorated type towel ring square shape with round flange all as specified. Make- Jaquar, Model No- ACN-1121N and equivalent range in Marc Kohler / Hindware as per approved by GE.

Supply and fixing PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor/wall complete all as specified and directed.

Supply and fixing PVC (SWR) bends, 75 mm bore complete all as specified and directed.

Supply and fixing PVC(SWR) Tee 75 mm bore complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap with grating,75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

Material and labour for for PVC (SWR) pipe including all fittings such as bend, tee etc of 40 mm bore single socketed in any length with addisive joint fixed to wall with suitable clamps of adequate numbers etc complete all as specified and directed.

Material and labour for mild steel frame work such as gates, grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 complete all as specified and directed.

Material and labour for for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour three track three panels sliding window / ventilator with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116x45 mm & sash 46x62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimesion, comprising of uPVC multi chambered frame, with inbuilt roller track sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white poweder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be measured and paid seperately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing Sheet glass, ordinary quality in square but exc 0.50 Sqm each pane, 5.5 mm thick fixed to any metal/PVC/UPVC section complete all as specified and directed.

Supply and fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to any metal/PVC/UPVC section complete all as specified and directed.

Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.

Supply and fixing 18 mm thick waterproof marine ply with both side lamination one side white and other side as approved colour with edge binding fixed with stainless steel screws, adhesive to fabricate cabinet sides, top and bottom, door, shelf inside the cabinet and drawer and all fittings complete all as per manufacturer’s instructions and as directed by engr-in-charge. NOTE :-(i) Cost of each member i,e. top and bottom, door, shelf inside the cabinet and drawer etc. shall deemmed to be included in quoted rate. (ii) hinges, channels and handles shall be measured and paid for separately.

Supply and fixing telescopic channels of any size for drawer of any cabinet etc ccomplete all as specified and directed.

Supply and fixing auto closing stainless steel (Grade 304) hinges 35 mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for cabinet shutters of make as approved complete all as specified and directed.

Supply and fixing stainless steel handles of 100 mm size for cabinet shutter complete all as specified and directed.

Supply and fixing of Steel work in tubular trusses, post, purlin, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

Supply and fixing pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Supply and fixing 12mm thick toughened glass (plain or frosted) as in hinged/sliding doors, partitions, automatic doors and similar work with all necessary fittings like top and bottom brackets, two numbers of stainless steel handle as appropriate size for each shutter, stainless steel locking arrangement including cutting to shape, drilling holes required etc alongwith all necessary fittings (but excluding double action floor spring) complete all as specified and as directed.

Material and labour for sub main wiring (concealed) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 6 sqmm & one run of PVC conduit shall be measured as single unit.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

(b) One exhaust/Ceiling fan point controlled by one switch.

(c) One light point controlled by two, two way switches,

(d) One switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No 58 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 58 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Note for Item No. 58 to 63 :- The auoted rate shall deemmed to be included cost for making good thehe disturbed surfaces of wall for concealing box/ wiring by applying cement plaster, putty and colour wash etc matching with the existing surfaces.

Supply and fixing LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of make : CG Cat Part No. LSTS-25-CDL :- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed.

Supply and fixing new 18 Watt LED round/square recessed flat panel light pearl model with locking arrangement in ceiling with a nominal system lumen output of 1800 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. Make : CG Cat Part No. LSCRM-18W-CDL/NWor equivalent in Bajaj/Wipro/Philips.

Supply & fixing new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/ Wipro.

Supply & fixing 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 120 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675977 or equivalent in Seimens/ L & T

Supply and fixing Switch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in Seimens/ L & T

Supply and fixing socket modular type 6 Amps 3 pin 2 module 230 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in Seimens/ L & T

Supply and fixing for ceiling rose, surface bakelite, 65 x 50 mm, three terminals ISI marked all as specified and as directed.

Supply and fixing socket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Seimens/ L & T

Supply and fixing switch modular type 16 Amps,one way with indicator, 1 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Seimens/ L & T

Supply and fixing switch modular type single pole two way 6 amps 230 volts, all as specified and as directed. Make : Legrand Cat No 675502 or equivalent in Seimens/ L & T

Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 12 way with 200 amps rated busbar, 240 volts, with 100 Amp copper Bus bar as per IS-8623 complete all as specified and as directed. Make : Legrand Cat No 507611 or equivalent in Seimens/ L & T

Supply and fixing MCB SPN, 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed. Make : Legrand Cat No. 408617 or equivalent in Seimens/ L & T

Supply and fixing MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

Supply & fixing New Exhaust fan PVC body 10" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing energy saving ceiling fan 1200 mm sweep min air delivery 210 CFM with double ball bearing in opal white colour and BEE 5 star rated BLDC complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed.

Supply and fixing wall mounted fan hi speed of size 16" plastic body including all acessories and connected material complete all as specefied and directed.

Supply, fixing & testing of water heater storage vertical type of capacity 25 Ltrs, 5 Star rating, rated presuure of 8 bar,unique polymer coating tech, special titanium enamelled heating element of capacity upto 2 KW, special deflector alongwith grouting and fixing with suitable size of nuts and bolts fixing in the wall with PCC 1:2:4 type BI using 20 mm graded stone aggregate and making good the disturb sufrace including electric and water connection complete all as specefied and directed .

Material and labour for electric driven Chimney filterless, Oil collector, Autoclean, Motion sensor technology for easy operation , BLDC sealed motor alongwith top notch metal blower system, polished finish, 9 speed touch control with RPM Display, curved glass shape with a true suction capacity of 1425 CMPH with 15 years warranty on motor and 02 years comprehensive maintenance from the date of installation complete all as specified and directed.

Rajveer Infrastucture (BID ID -3390482)

M/s Ashwin Bhange (BID ID -3390504)

Bidder Name

Rajveer Infrastucture

M/s Ashwin Bhange

dhanshree enterprises