Renovation of park and ground in Community Center, Kadipur, Zone 1, MCG.

Amount

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be` made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix theequipment on to it and cover nuts and bolts with the baseplate cover, all complete as per direction

Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped

Providing and laying UPVC pressure pipes of 10Kg/Sqcm pressure rating class IV (IS : 4985-1983) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 100m complete, compaction and consolidation Including laying alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design (For garden hydrants). 50OD mm.

-Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick

-Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mmb make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick

Repairing of Old Swing- Chain Swing, Bridge Ladder, Merry Go Round, Wave Slide, Jungle Gym, Sea-Saw with rubbing, painting and spraying with good finish by painting machine at site complete in all respect to full satisfaction of engineer-in-charge

NS Item= Ornamental Canopy with base complete in all respect – with 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel and frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top and bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation and construction of canopy base should be made of earth work .15 m deep, Brick ballast .15 m depth,two steps of first class brick work 1:5 of 3.00 mX.30 mX.45 m and 3.00 m X.30 m X.60m, cement concerete on .10 height and finishing with checqurred tiles on the base and steps. (Including fixing at site and supervision and transportation and all type taxes)

Bidder Name

Amount

NR ENTERPRISES(GSTN-06AAOFN7557P1ZA)

professional contracts pvt ltd(GSTN-06AAJCP1585B1ZK)

M/s Sanjay associates(GSTN-06ADLPA7063M2ZB)

M.K CONSTRUCTIONS(GSTN-06ABMPY0992J1ZX)

R.S Enterprises(GSTN-06ALGPR3151E1ZB)

CROSS ROAD BUILDCON PRIVATE LIMITED(GSTN-NA)

Universal Services(GSTN-NA)

The Bedi Coop L and C Society Ltd Chandana(GSTN-NA)

M/s Nitin Enterprise(GSTN-NA)

SHIVOM ENTERPRISES(GSTN-NA)

The Shree Shyam Co Operative Labour and Construction society limited Pelpa(GSTN-NA)

M/s Lakshay and Company(GSTN-NA)

M/s MDM Construction(GSTN-NA)

Surender Kumar Contractor(GSTN-NA)

ADARSH GROUP(GSTN-NA)

M.K CONSTRUCTIONS

M/s MDM Construction

ADARSH GROUP

R.S Enterprises

professional contracts pvt ltd

M/s Sanjay associates

Surender Kumar Contractor

M/s Lakshay and Company

The Shree Shyam Co Operative Labour and Construction society limited Pelpa

SHIVOM ENTERPRISES

The Bedi Coop L and C Society Ltd Chandana

CROSS ROAD BUILDCON PRIVATE LIMITED

M/s Nitin Enterprise

Universal Services

The Shree Shyam Co Operative Labour and Construction society limited Pelpa

NR ENTERPRISES

R.S Enterprises

SHIVOM ENTERPRISES

M/s Sanjay associates

M.K CONSTRUCTIONS

professional contracts pvt ltd

Surender Kumar Contractor

M/s MDM Construction

The Bedi Coop L and C Society Ltd Chandana

ADARSH GROUP

M/s Lakshay and Company

M/s Nitin Enterprise

CROSS ROAD BUILDCON PRIVATE LIMITED