Raising of rail level PF no.1 at Khabra kalan Halt, Nangal degrota Halt, Nyoli Kalan Halt & Bajekan Halt station over Bikaner Division along with extension to 480m under control of ADEN/Sirsa.

Item Breakup - A-CPWD DSR items-21

pattern. Total 9507976.00 All items of all other chapters except S.No. 1 & 6 mentioned above of CPWD DSR ( Amended up to Item- 7 date ) S No. Item No Description of Item Unit Qty Rate Amount 1.0 CARRIAGE OF MATERIALS By Mechanical Transport including 1.1 loading,unloading and stacking 1.1.18 Disposal of moorum/building rubbish/ malba/ cum 320 411.3 131616 similar unserviceable, dismantled or waste material by mechanical transport including 1 loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 8.0 CLADDING WORK BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base 8.2 cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby 8.2.2 red 2 8.2.2.2 Area of slab over 0.50 sqm Sqm 40 4425.35 177014 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including 8.3 machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 3 8.3.2 Granite work Metre 168 418.85 70366.8 8.4 Extra for fixing marble /granite stone, over and Metre 32 475.55 15217.6 above corresponding basic item, in facia and 4 drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. 8.20S STONE WORK DRY CLADDING 8.31 Providing and fixing Ist quality ceramic glazed Sqm 160 1063.45 170152 wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by 5 Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 9.0 WOOD AND P.V.C. WORK 9.70S STAINLESS STEEL FITTINGS Providing and fixing IS : 12817 marked 9.70 stainless steel butt hinges with stainless steel screws etc. complete : 6 9.70.2 100X58X1.90 mm Each 116 86.15 9993.4 9.72S BRASS FITTINGS 9.84 Providing and fixing aluminium extruded Each 4 856.3 3425.2 section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 7 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. ANODISED ALUMINIUM FITTINGS (ALL FITTINGS 9.95S SHALL BE ISI MARKED) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not 9.96 less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 8 9.96.2 250x16 mm Each 16 234.9 3758.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than 9.97 grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY 9 9.97.3 200x10 mm Each 32 90.8 2905.6 10 9.97.4 150x10 mm Each 76 75.55 5741.8 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than 9.100 grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 11 9.100.2 100 mm Each 64 53.25 3408 9.105S GYPSUM BOARD PARTITIONS Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire 9.134 of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 9.134.1 35 mm thick shutters With ISI marked stainless steel butt hinges of 9.134.1.2 required size 12 9.134.1.2.1 Second class teak wood Sqm 10 4631.8 46318 Providing and fixing bright /matt finished 9.165 Stainless Steel handles of approved quality & make with necessary screws etc all complete. 13 9.165.1 125 mm Each 40 100.45 4018 12.0 ROOFING 12.1S SHEET ROOFING 12.11 Extra for providing and fixing wind ties of 40x 6 Metre 208 163.65 34039.2 14 mm flat iron section. Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 15 12.21.1 In 75x75 mm deep chase Metre 160 260.2 41632 Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry 12.40 surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 16 12.41.2 110 mm diameter Metre 312 319.75 99762 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.4 Single tee without door 17 12.42.4.2 110x110x110 mm Each 8 190.75 1526 12.42.5 Bend 87.5 degrees 18 12.42.5.2 110 mm bend Each 8 132 1056 12.42.6 Shoe (Plain) 19 12.42.6.2 110 mm Shoe Each 8 115.95 927.6 BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY 12.50 Providing and fixing precoated galvanised iron Sqm 408 671.55 273992.4 profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 20 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 12.51 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 21 12.51.1 Ridges plain (500 - 600mm) Metre 104 450.6 46862.4 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 22 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 3664 294.85 1080330.4 23 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 880 282 248160 13.3 20 mm cement plaster of mix : 24 13.3.1 1:4 (1 cement: 4 fine sand) Sqm 4880 402.15 1962492 25 13.3.2 1:6 (1 cement: 6 fine sand) Sqm 720 382.1 275112 CEMENT PLASTER WITH A FLOATING COAT OF 13.7S NEAT CEMENT 12 mm cement plaster finished with a floating 13.7 coat of neat cement of mix : 26 13.7.2 1:4 (1 cement: 4 fine sand) Sqm 132 361.3 47691.6 13.19S ROUGH CAST PLASTER Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh 13.19 plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. 27 13.19.1 Ordinary cement finish using ordinary cement Sqm 1608 752.4 1209859.2 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris putty of Sqm 1280 214.3 274304 2 mm thickness over plastered surface to 28 prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY 13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 2016 140.05 282340.8 Paint to give an even shade. Two or more coat 29 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 13.48A 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 Sqm 9680 154.45 1495076 30 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 13.71 per 14800 5.05 74740 Lettering with black Japan paint of approved letter 31 brand and manufacture per cm height 13.80 Providing and applying white cement based Sqm 2416 123.85 299221.6 putty of average thickness 1 mm, of approved 32 brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 13.83 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 33 13.83.2 Two coats Sqm 880 121.55 106964 Applying priming coats with primer of approved 13.85 brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.106 Painting (one or more coats) with black Japan Sqm 84 78.6 6602.4 34 paint of approved brand and manufacture to give an even shade. 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 64 2007.1 128454.4 35 equivalent design mix) 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c cum 160 1239.6 198336 36 equivalent design mix) 15.3 Demolishing R.C.C. work manually/ by cum 22 2928.1 64418.2 mechanical means including stacking of steel 37 bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 38 15.7.4 In cement mortar cum 368 1698.45 625029.6 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 39 15.12.1 Of area 3 sq. metres and below Each 12 302.7 3632.4 15.24 Demolishing dry brick pitching in floors, drains cum 136 1086.45 147757.2 etc. including stacking of serviceable material 40 and disposal of unserviceable material within 50 metres lead : BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY 15.60 Disposal of building rubbish / malba / similar cum 160 219.35 35096 unserviceable, dismantled or waste materials by mechanical means, including loading, 41 transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 17.0 SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 8 5781.35 46250.8 42 size 580x440 mm with integral type foot rests Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 4 5540.55 22162.2 43 seat and lid 17.7B Providing and fixing wash basin with C.I. Each 12 1404 16848 brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, 44 cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. 17.8 Providing and fixing white vitreous china Each 12 1500.05 18000.6 45 pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 17.23 Providing and fixing white vitreous china flat Each 8 1382.3 11058.4 back or wall corner type lipped front urinal 46 basin of 430x260x350 mm or 340x410x265 mm sizes respectively. Providing and fixing P.V.C. waste pipe for sink 17.28 or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 47 17.28.1.1 32 mm dia Each 20 90.95 1819 Providing and fixing PTMT Bottle Trap for Wash 17.70 basin and sink. 17.70.2 Bottle trap 38 mm single piece moulded with Each 12 325.1 3901.2 height of 270 mm, effective length of tail pipe

77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing 18.7 the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 49 18.7.3 25 mm nominal dia Pipes Metre 320 408.55 130736 BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY 50 18.7.4 32 mm nominal dia Pipes Metre 240 500.95 120228 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 51 18.8.2 20 mm nominal dia Pipes Metre 320 513.75 164400 52 18.8.3 25 mm nominal dia Pipes Metre 140 626.05 87647 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 53 18.9.3 25 mm nominal dia Pipes Metre 800 370.65 296520 18.15S BRASS FITTINGS Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 54 18.18.2 20 mm nominal bore Each 8 397.45 3179.6 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.2 45 cm length 55 18.21.2.1 15 mm nominal bore Each 20 85.2 1704 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 4000 9.7 38800 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 56 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of approved 18.54 quality and colour. 18.54.2 15 mm nominal bore, 122mm long, weighing Each 12 143.3 1719.6 57 not less than 99 gms Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, weighing Each 64 96.45 6172.8 58 not less than 75 gms Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 59 18.58.1.1 100 mm nominal dia Each 24 33.2 796.8 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.63 Providing and fixing PTMT angle stop cock 15 Each 24 136.6 3278.4 60 mm nominal bore, weighing not less than 85 gms 21.0 ALUMINIUM WORK BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. 21.1 Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.3 Polyester powder coated aluminium (minimum Kg 320 474.7 151904 61 thickness of polyester powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.3 Polyester powder coated aluminium (minimum Kg 480 573.4 275232 62 thickness of polyester powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 20 1325.55 26511 63 (weight not less than 12.50 kg/sqm) 21.17 Providing and fixing anodised aluminium grill Kg 20.8 560.85 11665.68 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm 64 centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 22.0 WATER PROOFING 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 4.8 7510.75 36051.6 65 sand : 4 graded stone aggregate 20mm nominal size) 23.0 RAIN WATER HARVESTING & TUBEWELLS BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.1 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil 66 23.1.1.1 300 mm dia Metre 140 592.05 82887 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.2 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, 23.3 conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 67 23.3.3 200 mm nominal size dia Metre 80 951.95 76156 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, 23.4 conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 68 23.4.3 200 mm nominal size dia Metre 40 1099.25 43970 23.8 Gravel packing in tubewell construction in cum 40 1479.25 59170 accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required 69 grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge. Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell 23.14 as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 70 23.14.3 200 mm clamp Each 4 1827 7308 Providing and fixing Bail plug/ Bottom plug of 23.15 required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 71 23.15.3 200 mm dia Each 4 308.55 1234.2 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY BIKANER DIVISION-ENGINEERING/NORTH WESTERN RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength 26.86 of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 72 26.86.7 Frame size 65 x 150 mm Metre 88 1481.85 130402.8 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N 26.87 (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 73 26.87.2 35 mm thick Sqm 36 4556.05 164017.8 Total 11751082.68

Item Breakup - B-IRUSSOR-21

JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity Total 25920.60