Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹12.1 L
Closing Date
7 Aug 2025, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Muniraju .P
Construction of 220kV Outdoor GIS Line Bay at existing 220/66/11kV Chikkanagara sub-station and running of 220kV, 1000sqmm XLPE UG Cable (3 Runs) for a distance of 0.038kms from 220kV Chikkanagara Sub Station along with Construction of 220kV SC OH line from 220kV Chikkanagara Sub Station to the proposed Railway traction substation at Sakleshpura for a distance of 2.123kms in Sakleshpura Taluk, Hassan District on Deposit Contribuition Work (DCW) Basis for Arranging power supply to an extent of 40MVA on 220kV in favour of DRM(TRD), SWR Mysore Division, Mysore
KPTCL/2025-26/TL/WORK_INDENT2385
KPTCL/2025-26/TL/WORK_INDENT2385
Open
Transmission Line
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for Clause No. 3.2(b)(i) of ITT such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer.
Documentary proof for Clause No. 3.2(b)(ii) of ITT such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Cl.No.3.2(d)(A)(3)Qualifying Requirements for Tower Manufacturer as a Bidder: i) Shall upload Necessary documentary evidence for Cl.No 3(a), (b) of Cl.No 3.2(d)(A)issued from Utilities such as P.O. copies, LOA/DWA, Performance Certificates issued by the end users (Power Utilities) not below the rank of Executive/Divisional Engineer, should be uploaded along with the offer
Cl.No.3.2(d)(A)(3)Qualifying Requirements for Tower Manufacturer as a Bidder: ii) The bidder shall upload the relevant documents in support of Cl.No.3(c) of Clause No.3.2(d)(A) above such as copy of the approved letter issued from utility approving design documents, copy of the Purchase Order containing the details of scope of work, ISO certificate, certificate issued by Utility Or Chartered Engineer in support of In-house design department indicating the details of infrastructure & Technical Personnel /Registration certificate issued by the Government Authorities in support of In-house design department.
Tenderer shall upload Necessary documentary evidence Necessary documentary evidence and end user (Indian Government Power Utilities) certificates issued from Utilities such as P.O. copies or LOA/DWA and Performance certificates should be uploaded along with the offer for Clause No. 3.2(d) (A)1 a) of ITT for having minimum experience of not less than Five (5) years as a regular manufacturer in the design, manufacture, testing and supply of 220kV or higher voltage class SF-6 GIS modules as tendered as per IEC or equivalent standard as on the date of Bid submission.
Tenderer shall upload Necessary documentary evidence Necessary documentary evidence and end user (Indian Government Power Utilities) certificates issued from Utilities such as P.O. copies or LOA/DWA and Performance certificates should be uploaded along with the offer for Clause No. 3.2(d) (A)1 b) for having supplied at least four (04)nos. of SF6 GIS Circuit Breaker Modules in India to One (1) no. of 220kV or higher voltage class GIS Sub-station tendered and same shall be in satisfactory service for a minimum period of two (2) years as on the date of Bid Submission.
The documentary proof of fulfilling the qualification to bid shall be furnished along with the bid. The details of the GIS modules supplied, indicating the quantity, year of supply shall be furnished. The end user should also certify that the quality and the performance of GIS modules supplied to them were satisfactory and that no claims are pending against the Bidder regarding the quality and the performance of the GIS modules supplied to him. The Bidder shall furnish the performance certificate of the end user.
Cl.No.3.2(b)(iii)Qualifying Requirements for Laying of 220kV EHV UG Cable in the event of award
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder & Consortium member(In case of Consortium)
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent or verified and certified by Chartered Accountant/Cost Auditor as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information by the lead Bidder and Consortium member(In case of Consortium).
The Tenderer shall upload Bankers Certificate of lead Bidder & Consortium Partner (if applicable) duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities)
self-declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Lead Bidder & Consortium partner(in case of Consortium) stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Certificate from Chartered Accountants for split details of financial Turnover and GST in the prescribed format (Annexure-XX) of Lead Bidder & Consortium partner (In case of Consortium).
Lead Bidder & Consortium partner (in case of Consortium) shall upload self-declaration (proof of purchase to be uploaded) as per the format mentioned in clause no. 1.6 of section 3 of tender documents wrt to Equipment Capabilities as per Cl.No 3.3(a)
In case of lease/hire, the Lead Bidder & Consortium partner (in case of Consortium) shall upload hiring/Rental agreement wrt to Equipment Capabilities as per Cl.No 3.3(a).
Self-declarations of Lead Bidder & Consortium partner (In case of Consortium) in respect of Litigation, dis-qualification due to non-performance, Risk & cost clause, Technical snag for GIS,EHV UG Cable and Restriction on border sharing as specified in Annexure- XVI& Annexure-XVII as per Clause No.2.4of ITT
Consortium Agreement
Power of Attorney in favour of all the persons signing the documents, Power of Attorney for Consortium, combined power of attorney signed by the signatories of all the members of consortium as an evidence of authorization for nominating leader (Prime Bidder) of consortium.
Valid Super Grade Electrical Contractors License of both Lead Bidder & Consortium partner (in case of Consortium) issued by the Govt. of Karnataka
Certificate of Incorporation of the Individual/Consortium or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
The bidder and Consortium Partner(in case of Consortium) should have valid GST registration with GSTIN number PAN Card and ISO Certificates.Note The successful Bidder and his consortium partner who have GST registration in other States should have GST registration in the State of Karnataka mandatorily at the time of execution of the Contract Agreement.
No Deviation Certificate
Letter of Undertaking as in Annexure
The Qualification and experience of key Personnel proposed for carrying out the Work
Description of the Tools & Plant available with them for execution of the Work
undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https://kptcl.karnataka.gov.in, Link Tender and Procurement - application for Vendor registration etc.
undertaking to source the supply of equipment/material from Vendors who meet the eligibility clauses regarding restriction on procurement from a country which shares land border with India as specified in Annexure- XVII.
Details of Works on hand and Ongoing contractual commitments
Upload all relevant documents as per Section-3 Qualifying information, NIT, Terms & conditions as stipulated in the Tender Document.
Copies of original documents defining the Constitution or Legal Status, place of Registration and Principal place of Business of the Bidder (Lead Bidder & Consortium Partner) , written Power of Attorney to the Signatory of the Bid to commit the Bidder (Lead Bidder & Consortium Partner) to the Contract along with the resolution passed in this regard by the Board of Directors all the Partners of the Firm.
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets
Please note that the Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only.
Tenderer shall upload Documentary proof for Clause No. 3.2(d) A1 (d) of ITT for type tests certificates. The outdoor type SF6 Gas Insulated Metal enclosed Switchgear(GIS) manufactured should have been type tested earlier. The type tests certificates of offered outdoor type SF6 Gas Insulated metal enclosed Switchgear (GIS) (including tests for degree of protection applicable for outdoor installation) modules for the subject tender of 50kA or higher short circuit level as tendered not older than Fifteen (15) years as on the last date of submission of bid conducted at following laboratories shall be uploaded.
The equipment shall be supplied from the same manufacturing works, where from the sample unit was manufactured and successfully type tested as per relevant standard (IS/IEC).However, in case of GIS switchgear, Type test reports of Parent company/ collaborator will be accepted provided same Design & process by which Parent company/Collaborator has manufactured the equipment, has been followed by Indian manufacturer. A separate letter especially for this tender which further legally endorses the guarantee by the Parent company/ Collaborator shall also be uploaded, as per the prescribed format.
The documentary proof of fulfilling the qualification to bid shall be furnished along with the bid. The details of the GIS modules supplied, indicating the quantity, year of supply shall be furnished. The end user should also certify that the quality and the performance of GIS modules supplied to them were satisfactory and that no claims are pending against the Bidder regarding the quality and the performance of the GIS modules supplied to him. The Bidder shall furnish the performance certificate of the end user.
In the event of award, The Bidder having Technical Capability prescribed at 3.2 b(i) and 3.2 b(ii) individually or in consortium along with financial capability prescribed at 3.2(a) ,3.3(b) and 3.6 shall source the 220kV UG cable and UG cable accessories i.e., Joints and Terminations from the manufacturers who meets the qualifying requirement stipulated for manufacturer of cable and cable accessories i.e., Joints and Terminations as in clause 3.2(d)A 2 for this particular tender.
The Bidders shall upload an undertaking along with the Bid stating that in the event of an award, they shall procure the 220kV, 1000Sq.mm UG Cable and UG Cable Accessories ie joints & terminations as per the technical requirements of the subject tender from any 2 (Two) manufacturers who meet the stipulated requirements as at 3.2(d) A(2), as per the prescribed format, failing which Bid is liable for rejection.
Other documents if any
₹7,500
₹12.1 L
7 Jul 2025
7 Jul 2025
8 Aug 2025
7 Jul 2025
7 Jul 2025
Terminal Bay supply
Metal encapsulated SF6 gas insulated Switchgear 220 kV, 50 kA rating suitable for outdoor installation of modular design.220 kV line (U.G.Cable) Module:
Each module comprising of the following:a)SF6 c...
Outdoor Local Control Cubicle for 220 kV line (UG cable) module as per specification.
Relay & Protection Panels:-
220 kV Line -Type 2L (Annexure RPP1-Cable -SAS)
Note: The proposed line C&R panel shall be interfaced with existing SAS & bus protection at Chikkanagara Sub station.
ISOLATORS: Isolators and Terminal Connectors, as per Technical Specification including solid core cylindrical post insulators
220KV, 2000A, 50KA Class Double Break Motor operated isolators with soild ...
Insulators: Post Insulstor - Cylindrical solid Core as per 1S5350, Part II & III
i) For 220kV Side-2Units/Stack: Post Insulator of Rigid Bus Class, 1 Unit/stack
RIGID BUS WITH TAPS & CLAMPS:
Aluminium Tube Conforming to 63401WP of IS-5082/1969 (BS1600-Sch.40) of following sizes.
Fabrication, galvanising and supply of Mild Steel of Mounting Structures (excluding Bolts & nuts)-Total Weight
Note:(i) Rate to be quoted on per t Basis
(ii) For detailed breakup refer techno-...
Fabrication, galvanising and supply of Bolts & Nuts for Mounting Structures -Total Weight
Note:(i) Rate to be quoted on per t Basis
(ii) For detailed breakup refer techno-commercial sheet
AC Distribution Box: Single front type, 6 terminals, 750x1350x300mm , 1 I/c of 100A, MCCB 20kA+6 O/G MCB 16A+ 1 O/G of 100A, HRC fuse etc complete as per specification
1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.
i. 2.5 Sq.mm 19 Core
ii.2.5 Sq.mm 10 Core
iii.2.5 Sq.mm 4 Core
iv.6 Sq.mm 4 Core
v.4 Sq.mm 4 Core
vi.1P x 0.5Sq.mm screened cable for 4-20mA signal Transmission
Outdoor Tarrif Metering cubicle for accomodation of main & check meters as per technical specification.
Meter Panel : Summation Metering unit suitable for 2 incoming lines (Tariff metering Panel) with...
3 phase 4 wire, CT/PT operated, 1Amp, kWH energy meter accuracy class 0.2S, with ABT, as per ESCOM Specifications
Control Cable: 1.1kV class, PVC insulated copper control cables of following sizes including end terminations using lugs/ferrules (from metering instruments to tariff metering panel)
a) 6sqmm 4 Core
b) 4sqmm 4 Core
c) 2.5sqmm 19 Core
d) GI Pipe: 50mm B class GI pipe for laying of cables from metering instrument to tariff metering panel including necessary collors and bends.
Digital Tele Protection Coupler (DTPC)
8 command with provision for interface with E1 interface (220 V DC source)
Note: Each 1no. at both S/S end
BATTERY CHARGER :
48 V, 200 AH Float cum Boost Charger, 75 A
LTAC PANEL & ACDB :
For 400 kV and 220 kV Sub-station
48 V DCDB independent change over between DC source 1 and 2 with 20 feeders
At Sakleshpura RTS
SDH Equipment : (STM-16 MADM, upto 3 MSP 1+1 protected directions) Base Equipments (common cards, cross-connect/control cards, optical base card, power supply cards, power cabling, ...
a) S16.1 SFP(30Km)
E1 Interface Card (Min. 16 interfaces per card) : 3 MSP
Ethernet interface 10/100 Mbps with Layer-2 switching (Min. 2x1 Gbps + 4x100/10 Mbps ports) without SFP : 5 MSP
1 x 1000 base LX SFP
(Gigabit Ethernet Interfaces 10/100 Mbps with layer-2 Switching)
Cabinet equipment to house SDH Equipment + Optical cards + Tributary Cards, Drop/Insert MUX Equipment and DACS Equipment
Supply of 220 V DC to 48 V DC Converter for SDH Equipment
Station and Yard lightening:
Supply and installation/ Fixing/ Provision o f Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), ru...
PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.
Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...
Mandatory Spares
SF6 CIRCUIT BREAKER:spares shall be for 220KV Modules
Rubber gaskets, 'O' rings and seals
Trip coils with resistor.
Closing coils with resistor
Relays, Power contactors, push buttons, timers & MCB etc.
Pressure switches
Auxiliary switch assembly
Operation Counter
Rupture disc/diaphragm
Windoscope / Observing window
Testing & Maintainance for GIS/Relays
Portable SF6 Gas leak Detector
Terminal Bay Erection
Metal encapsulated SF6 gas insulated Switchgear 220 kV, 50 kA rating suitable for outdoor installation of modular design.
220 kV line (U.G.Cable) Module:
Each module comprising of the following:
Relay & Protection Panels:-
220 kV Line -Type 2L (Annexure RPP1-Cable -SAS)
Note: The proposed line C&R panel shall be interfaced with existing SAS & bus protection at Chikkanagara Sub station.
Installation, integration, testing & commissioning of C&R panels with SAS supplied by other SAS supplier for new bay extension with different Automation System
220 kV feeder C&R panels with BCUs inclu...
ISOLATORS: Isolators and Terminal Connectors, as per Technical Specification including solid core cylindrical post insulators:
220KV, 2000A, 50KA Class Double Break Motor operated isolators with soild...
Insulators: Post Insulstor - Cylindrical solid Core as per 1S5350, Part II & III
i) For 220kV Side-2Units/Stack: Post Insulator of Rigid BusClass, 1 Unit/stack
RIGID BUS WITH TAPS & CLAMPS:
Aluminium Tube Conforming to 63401WP of IS-5082/1969 (BS1600-Sch.40) of following sizes.
Erection of Mounting Structures & Station Yard Lighting Structure(including Bolts & nuts) -Total Weight
Note:(i) Rate to be quoted on per t Basis
(ii) For detailed breakup refer techno-commer...
AC Distribution Box: Single front type, 6 terminals, 750x1350x300mm , 1 I/c of 100A, MCCB 20kA+6 O/G MCB 16A+ 1 O/G of 100A, HRC fuse etc complete as per specification
Laying of 1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.
i.2.5 Sq.mm 19 Core - 2000Mtr
ii.2.5 Sq.mm 10 Core - 2000Mtr
Laying of Control Cable: 1.1kV class, PVC insulated copper control cables of following sizes including end terminations using lugs/ferrules (from metering instruments to tariff metering panel)
G.I flat: Grounding of equipments with G.I Flat 75 x 12 mm and connecting equipments to the earth mat/ground pit. Each point of the earthing with all formation works like bending, twisting, drillin...
Digital Tele Protection Coupler (DTPC)
8 command with provision for interface with E1 interface (220 V DC source)
Note: Each 1no. at both S/S end
BATTERY CHARGER :
48 V, 200 AH Float cum Boost Charger, 75 A
LTAC PANEL & ACDB :
48 V DCDB independent change over between DC source 1 and 2 with 20 feeders
At Sakleshpura RTS
SDH Equipment : Installation, testing, integration & commissioning of (STM-16 MADM, upto 3 MSP 1+1 protected directions) Base Equipments (common cards, cross-connect/control cards, ...
Installation of Cabinet equipment to house SDH Equipment + Optical cards + Tributary Cards, Drop/Insert MUX Equipment and DACS Equipment
Installation, testing & commissioning of 220 V DC to 48 V DC Converter for SDH Equipment
Station and Yard lighting:
PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.
Terminal Bay Civil
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
220kV, 1000sqmm XLPE UG Cable 220kV (E) grade, 1 core, Circular, stranded, plain annealed Segmental compact type miliken copper condutor, conductor screen on extruded semi conducting compound, cros...
Insulated shield break type joint suitable for 220kV,
1C x 1000Sqmm copper conductor, XLPE insulated, lead sheathed cable complete with all accessories as per technical specification
Insulated shield earthing type joint suitable for 220kV,
1C x 1000Sqmm copper conductor, XLPE insulated, lead sheathed cable complete with all accessories as per technical specification
Outdoor type cable end termination (procelain design) suitable for 220kV (E) 1 -core, 1000sqmm, Segmental compact type miliken copper conductor, XLPE, lead sheathed cable including PVC earthing cabl...
Indoor type cable termination (plug in dry type) suitable for GIS modules confirming IEC 62271-209 for 220kV 1000Sqmm copper conductor XLPE insulated cable as per technical specification.
220kV Link boxes, single phase outdoor structure mounting type with SVL/CCPU and PVC earthing cable including the cost of 1Cx 400Sq.mm sheath bonding copper cable as per technical specifcations.
220kV Link boxes, three phase cross bonding link box with SVL including 1C x 400Sqmm sheath bonding cable and 400/400 sqmm co-axial cable as per technical spec suitable for 220kV 1000sqmm UG Cable. Th...
220kV Link boxes, three phase link box without SVL including 1C x 400Sqmm sheath bonding cable and 400/400 sqmm co-axial cable as per technical spec suitable for 220kV 1000sqmm UG Cable. The Link box...
Terminal connectors to connect cable end termination to the drake ACSR conductor/ Aluminium rigid pipe heavy type with bolts & nuts and washers, complete.
SURGE ARRESTOR :Porcelain/Polymer (with terminal connector suitable for Al. tube/conductor)
i)198 kV Metal Oxide with surge counter Arrestor class : Station Medium Duty (SM) - Discharge Class 3 - for ...
Post Insulators - Cylindrical Solid Core Insulators as per IS:5350, Part-II & III For 220KV Side-2 Units /Stack
i) Solid Core Bus Post Insulator 220 kV
Optical fibre and its accessories
Unarmoured Underground FO cable (48 DWSM)
Polyvinyl lubricated bond ( PLB) HDPE OD 40mm with accessories
Straight Joint kit for OPGW to OFC 48F
Line Interface Unit (LIU) for OFC suitable for 48F
Note: LIU at Sakleshpura RTS end
Collars for PLB Pipe
Fiber to Ethernet Media Converter :
UG Cable Surveying: Detailed survey along the route alignment by using Modern Survey equipment like DGPS /Total stations / Digital theodolites /GPS including profiling by using computer aided techniqu...
Laying including testing and commissioning :
Laying of 220KV single core, 1000sqmm XLPE Segmental compact type miliken Copper cable in trefoil, tapping , fixing pipes for drain and gate crossing as ...
Handling & making normal straight joints for 220 KV power cables with all consuambles at site etc., complete.
Handling & making of cables end termination for 220KV power cables with all consuambles at site etc., complete.
Erection of single phase earth link boxes, on to the cable end termination structure connecting earth leads with all lugs, fixtures, clamps, bolts, and nuts complete.
Erection of three phase earth link boxes, buried type with all lugs, fixtures, clamps, bolts, and nuts complete.
Laying of 48 fibre dual window mono mode (DWMM) optical fibre cable as per drawings & specifications
Handling & making straight through joints closures for 24/ 48 fibre dual window mono mode (DWMM) optical fibre cable
Handling & making terminal joints for 48 fibre dual window mono mode ( DWMM) optical fibre cable
Grounding of equipments by providing cast iron pipe of 100 mm ID 13mm thickness , 2.75 m long with 2 part clamp out of GI flat 50X6 mm as per drawing including the cost of excavation.
Supplying & Providing 450mm dia 450mm height 1.5" to 2' thich hume pipe collar (non pressure type) for eatrth pits including all leads and lifts etc.,(only for Single phase Link Boxes earthing)
Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...
Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...
Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Supplying and Providing pre cast RCC Protection Covers using M20 grade Concrete, steel of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Supplying and Providing Pre cast Cable Route/ Joint marker using M15 grade Concrete, MS rods of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the c...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying of warning tape / Caution tape / detector tape for HDPE pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant ISS with latest amendments with appurtenances....
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Check Survey and Towers Spotting.
Check survey using their own equipment for 220 kV Plain terrain
1.The survey covers the scope as defined in Technical Specifications & As per volume -VI of Co...
Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications.
Paving out conductor from anchor to anchor normally spaced at 5...
Erection of Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.
1.The Bidders are required to quote the rates ...
Supplying and fixing AC devices:
Supplying and fixing GI angle 450 x 450 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of...
ii) Supplying and fixing Barbed wire as per specification
Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...
Dismantling Portion:
Note : 1) The Released materials shall be transported to the nearest Major Works StoreS of KPTCL.
2)The rates quoted for releasing/dismantling shall also include the charges for ...
ii. Releasing & Restringing of Existing Drake ACSR Conductor
iii. Releasing & Restringing of Existing OPGW Wire
Installation, testing & commissioning of 24F/48F OPGW cable along with associated hardware fittings as per technical specification
OPGW cable & Accessories
Joint Box for 48 Fibre OPGW as per requirement for looping/coiling of cable as per technical requirement
Installation, testing & commissioning of FODP for 24F/48F/96F : Indoor type, rack mounted with FCPC coupling and pigtails
Laying, installation, testing & commissioning of 12/24/48 F Optical fibre approach cable in switch yards of 400 kV & 220 kV (Including hardware) along with HDPE Pipe
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Grand Total weight of Tower parts-High Tensile Steel
Note:i) Rate to be quoted on per tonne Basis
ii) For detailed breakup refer techno-commercial sheet
Grand Total weight of Tower parts-Mild Steel
Note:(i) Rate to be quoted on per tonne Basis
(ii) For detailed breakup refer techno-commercial sheet
Grand Total weight of Bolts , Nuts& Washers
Note:i)Rate to be quoted on per tonne Basis.
ii) For detailed breakup refer techno-commercial sheet
Tower accessories :
i.Number Plates
ii.Danger Boards
iii.Circuit plate
iv.Phase plate (Set of 3 No.)
v.Earth bond 450 mm long
Conductor & Earth wire :Drake ACSR Conductor on Plain Terrian
Insulator Strings suitable for Drake Conductor:220kV line
NOTE: All the Insulator strings quoted by the bidder shall be of the same type i.e. all the Insulator strings shall be of Disc Insulators typ...
B.Suspension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X14nos. of 90kN Disc insulators
b. Porcelain long rod insulator string equivalent to 1x14no...
B)Hardwares and Clamps for conductor with Arcing Horns.
i.Single Tension insulator with clamps and accessories suitable for 220kV insulators and Drake ACSR
ii.Single Suspension insulator with clamps and accessories suitable for 220kV insulators and Drake ACSR
iii.Double Tension insulator with clamps and accessories suitable for 220kV insulators and Drake ACSR
Accessories for Drake ACSR Conductor :
i.MSC Joints suitable for Drake ACSR
ii.Repair sleeves suitable for Drake ACSR
iii.P G Clamps suitable for Drake ACSR
iv.Vibration dampers for Drake
OPGW cable & Accessories i.48 Fibre(DWSM) OPGW fibre Optic cable.
ii.Suspension Clamp assembly for 48 Fibre OPGW
iii.Tension Assembly for Dead End for 48 Fibre OPGW
iv.Tension Fitting assembly for 48 Fibre OPGW including all accessories for joint box (splicing location)
v.Tension assembly-Double Tension pass through for 48 Fibre OPGW
vi.Tension fitting assembly on suspension Tower for 48 Fibre OPGW including all accessories for joint box (splicing) location
vii.Vibration damper for 48 Fibre OPGW
viii.Down lead clamp assembly for fibre OPGW
ix.Joint Box for 48 Fibre OPGW
FODP 96F:Indoor type consisting of 2Nos of rack mounted LIU each of 48F (to be housed in FODP) with FCPC coupling and pigtails
Fibre Optic Approach Cable
48 Fibre (DWSM) including Installation Hardware
set for 48 Approach Cable
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Revised Sec 11a Techno Commercial Sheet WI2385.xlsx
Tender Document • 1.22 MB
Prebid Proceedings.pdf
Others - Prebid Proceedings • 0.11 MB
Revised Drawings.zip
Tender Document • 5.99 MB
NIT Chikkanagara WI2385.pdf
Tender Document • 1.85 MB
Advisory note to bidders.pdf
Others - Advisory note to Bidders • 0.07 MB
Technical Specifications.zip
Tender Document • 35.67 MB
Circulars and Guidelines.zip
Tender Document • 3.00 MB
Revised Tender Doc Chikkanagara WI2385.docx
Tender Document • 0.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .