To carry out Electro-Mechanical work for installation of machineries in various departments of H.B.T. Medical College.

Amount

To carry out Electro-Mechanical work for installation of machineries in various departments of H.B.T. Medical College.

1st category Cu armoured cables FRLS outer sheathed- 4C x 10 Sq.mm

1st category Cu armoured cables FRLS outer sheathed- 4C x 6 Sq.mm

1st category Cu armoured cables FRLS outer sheathed- 3C x 2.5 Sq.mm

Wiring for submains- casing n cap – 2 X 2.5 sq. mm+ 1 X 2.5 sq. mm earth wire in 20 x 12 mm(1/2 in)

Wiring for submains- casing n cap – 2 X 4 sq. mm + 1 X 4 sq. mm earth wire in 25 x 12 mm ( 3/4 in)

63 Amp. TPN MCB

15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch

IP 42 Wall/column Mounted distribution board with one Nos of 63A 4P MCB and 3 Noss 16A TP MCB / 12 Noss. 16A SP MCB as outgoing (4 way TPN DB)

ELCB with 100 mA sensitivity 100 A, 4 pole

63A TP MCB

Self priming pumpsets: 1 H. P. single phase / three phase motor, with head of (6 – 14Mtr.) giving discharge of (4.6 – 1.5 lps) (40 x 40mm). Pump body: Cast Iron, Impeller: Cast Iron, Shaft SS410

32A DP MCB

Wall mounting air circulator of 600mm sweep, 230 Volts,AC 50 Hz, oscillating type complete with all necessary accessories for completing installation.

Exhaust fan of 450mm sweep, 1400RPM, with 3650 CFM free air delivery, AC 415V , 50 Hz, Three phase complete with all necessary accessories for completing installation

40 x 40 x 5 mm of M.S.angle.

Replacement of existing damaged false ceiling sheet by new false ceiling duratuff/ equivalent sheet.

20 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

20 mm dia nominal bore

GUN METAL NON - RETURN VALVE:(FLANGED):- 20 mm dia.

GUN METAL GATE VALVES (FLANGED): -19/20 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved 50 mm nominal bore

20 mm nominal bore

Providing and fixing JAQUAR MAKE, PRESSMATIC Taps Model No. 031 Pillarcock Auto closing system etc complete

Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.

Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer),transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns afterfabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.)

M16 x 125 foil capsule (HVU) & M16 x 190 Rod

Providing and fixing of Heavy duty Alluminum Ladder for the use in water tank (25 ft)

Providing and fixing of Heavy duty Alluminum Ladder for the use in water tank (10 ft)

Providing and fixing of heavy duty chain pulley block for removing various pumps from underground water tank upto 25 ft.

Providing and fixing of M.S. stand for holding chain pulley

CPVC 25MM Union

CPVC 50MM Union

Removing of autoclave machines with its accessories

Re-fixing of autoclave machines with it drain lines and other plumbing accessories

INNOVATIVE ENGINEERING CO (BID ID -6811828)