Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹20.1 LAccepted-AOC C O MANOJ KUMAR KESHRI MIRA SADAN ROAD NO 03 ANAND VIHAR NEAR WAXPOL FACTORY BOOTY MORE BUTI RANCHI JHARKHAND 834012 | RANCHI | RANCHI | JHARKHAND | 834012 | 1 | Accepted-AOC ok | |
| 2 | 2₹21.1 L+₹81,575.30 (4.01%)Rejected-Finance SHANTI KUNJ CHESIRE HOME ROAD BARIATU RANCHI 834009 JHARKHAND | RANCHI | JHARKHAND | 834009 | 2 | Rejected-Finance Not lowest | |
| 3 | 3₹21.3 L+₹96,536.10 (4.75%)Rejected-Finance SHIV BHAWAN MAGADH COLONY ROAD NO 03 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | 3 | Rejected-Finance Not lowest | |
| 4 | 4₹21.9 L+₹1.5 L (7.57%)Rejected-Finance BESIDE RANCHI NURSING HOME BOOTY MORE RANCHI 835217 JHARKHAND | RANCHI | JHARKHAND | 835217 | 4 | Rejected-Finance Not lowest | |
| 5 | 5₹22.1 L+₹1.7 L (8.60%)Rejected-Finance VIKASH NAGAR ROAD NO 1 NEAR GAUSHALA RAMGARH CANTT JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | 5 | Rejected-Finance Not lowest |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT PO- HOTWAR RANCHI Pin- 834012
REPAIRS TO ROOF, CEILING, SUNKEN AND OTHER MISC B/R WORK AT OTM/MD ACCN BLDGS ON AGE B/R-I UNDER GE DIPATOLI
2023_MES_591691_1
8000/1901/E8
Open Tender
Miscellaneous Works
Item Rate
330 days
Deepatoli
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Dipatoli
₹60,000
Yes
14 Jun 2023
27 Apr 2023
29 May 2023
27 Apr 2023
27 May 2023
5 May 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and as directed.
Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed.
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in sunken portion with WPC @ 3% by weight of ement and making adequate slope toward spout pipe complete all as specified and as directed. (Note- WPC will be measured and paid for seperately)
M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement complete all as specified and as directed.Note - WPC will be measured and paid separtely
M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat including cleaning of surface over polythene film complete all as specified and as directed
M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L Cement concrete, Type E2- 1:5:10(40mm graded aggreated in foundations, filling and mass concrete in sunken portion of IWC and bathroom complete all as specified and as directed.
S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc complete all as specified and as directed.
S&F in repairs PVC valveless syphonic action with dual flushing system fancy type low level flushing cistern 10 ltr. Capacity of approved incl flush pipe of 32mm bore and all as specified and directed.
S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer complete all as specified and as directed.
S&F in repair 15mm, stop valve/angle valve, cast copper alloy fancy type chromium plasted with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design complete all as specified and as directed.
S&F as in repairs bib tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettred head, screwed for iron pipe etc complete all as specified and as directed.
M & L Non Skid ceramic colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm ,in floors over and including 15mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and as directed.
M&L for coloured glazed ceramic tiles in vertical surface 350mmx250mmx7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed.
complete removal of all existing roof treatment from RCC roof including old hussion felt and preparation of surface with bire brush and cleaning with water complete all as specified and directed.
Brushing net cement slury @ 3kg/sqm on roof slab complete all as specified and as directed.
M&L for 40 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate to roof , floor, chajja, RCC shelves etc at water retaning surfaces with WPC 3% by weight of cement and make proper good slope complete all as specified and as directed.
M&L for preparation of concrete roof surfaces and applying 10mm thick plaster in CM 1:4 and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces complete all as specified and as directed.
M&L for applying 3mm thick APP modified polymeric membrane over the bitumen coat surface weight not less than 3kg/sqm and over lap 100mm and sealed by torch application as per manufacture insteructions complete all as specified and as directed.
M&L for applying two coats aluminium paint over bituminous surface of membrane complete all as specified and as directed.
M&L 22 mm thick machine pressed & polished‘ cement concrete tiles with grey cement without pigment of size 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in CM 1:4 mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD 200 milli - litre mixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement,as per manufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of DR FIXIT of PIDILITE INDUSTRIES LTD or TILE GLUE of STP LTD as per manufactures instructions complete all as specified and as directed.
Taking down eaves gutters and rain water pipes (any size or patterns) including all fittings,heads,shoes,bends,swan-necks etc complete all as specified and as directed.
Taking up or down steel tubing and connections including for refixing or removal 15mm bore complete all as specified and as directed.
Taking up or down steel tubing and connections including for refixing or removal 20mm bore complete all as specified and as directed.
S&F steel tubing and connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed 15 mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor complete all as specified and as directed.
S&F steel tubing and connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed 20 mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor complete all as specified and as directed.
S&F in repair Gun-metal, globe or gate valves 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F 20mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and as directed.
S&F as in repair PVC water tank cover for 500/1000 ltr capacity suitable for closing of water tank with locking device and all as specified and directed.
Disconnecting exisiting tanks and re-fixing in position including repairs if any requirement, capacity of tanks exc 500 ltrs and not exc 1000 ltrs complete all as specified and as directed.
Disconnecting exisiting tanks and re-fixing in position including repairs if any requirement, capacity of tanks exc 250 ltrs and not exc 500 ltrs complete all as specified and as directed.
M&L for lcleaning and removing all scale and dirt etc in any position of tanks and fom mouth of circulating pipes, etc exc 250 but n.exc 500ltr capacity in liters of tank complete all as spd and direced. (Note :- During cleaning the tank if any damaged by the labour, it will be repaired by the contractor own his cost no extra payment to be claim by the department)
M&L for lcleaning and removing all scale and dirt etc in any position of tanks and from mouth of circulating pipes, etc exc to approchable 500 but n.exc 1000ltr capacity in liters of tank complete all as spd and direced. (Note :- During cleaning the tank if any damaged by the labour, it will be repaired by the contractor own his cost no extra payment to be claim by the department )
S&Fix in repairs decorative curtain rails made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colours and pattern as approved by the Engr-in-Charge, overall dia 28 to 29mm, including provn of two nos brackets on each ends and provn of two nos of globe on each ends for each windows/door for fixing completed with fency design complete all as specified and as directed.
Demolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed.
M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6) complete all as specified and as directed.
M&L brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in CM(1:4) complete all as specified and as directed.
Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15 mm thick on brick surface in CM (1:4) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement complete all as specified and as directed. Note - WPC will be measured and paid separtely
M&L rendering on other than fair faces of brick work 15mm thick in CM 1:6 and to be finished smooth and even with out using extra cement for internal surface complete all as specified and as directed.
M&L Rendering 5mm thick in cm 1:3 on ceilling. surfaces finished even and smooth without using extra cement complete all as specified and as directed.
S&F PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed.
S&F PVC(SWR) bends any radius 110 mm dia complete all as specified and as directed.
S&F PVC(SWR) pipe 75mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed.
S&F PVC(SWR) bends any radius 75 mm dia complete all as specified and as directed.
Supply and fix 75 mm dia bore PVC (SWR) branch piece,single (single Y) equal or unequal with access door complete all as specified and as directed.
Supply and fix 75 mm dia bore PVC (SWR) branch piece,double (double Y) equal or unequal with access door complete all as specified and as directed.
Supply and fix 75 mm dia bore PVC (SWR) junction single,(single T) equal or un equal with access door complete all as specified and as directed.
Supply and fix 110 mm dia bore PVC (SWR) branch piece, single (single Y) equal or un equal with access door complete all as specified and as directed.
Supply and fix 110 mm dia bore PVC (SWR) branch piece, double (double Y) equal or un equal with access door complete all as specified and as directed.
Supply and fix 110 mm dia bore PVC (SWR) junction single, (single T) equal or un equal with access door complete all as specified and as directed.
Supply and fix 110 mm dia bore PVC (SWR) junction single, (double T) equal or un equal with access door complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.
S&F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed.
S&F PVC (SWR) reducers 75mm dia complete all as specified and as directed.
S&F PVC (SWR) reducers 110mm dia complete all as specified and as directed.
M&L PVC (SWR) gully trp 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.
M&Lr PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed.
M&L PVC(SWR) multi floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed.
Supply and fix clamp out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 110 mm PVC pipe including dismantling complete all as specified and as directed..
All as per item No 63 above but for 75 mm bore of pipe complete all as specified and as directed.
M&l for Preparing surfaces plastered on new surface of wall and applying two coats of cement paint over one coat of cement base primer complete all as specified and as directed.
M&L for preparation of new surfaces and applying two coat of white wash on wall including cornices etc complete all as specified and as directed.
M&L for preparation of new surfaces and applying two coat of white wash on ceiling isurfces etc complete all as specified and as directed.
M&L for preparation of old surfaces and applying one coat of white wash on wall including cornices etc complete all as specified and as directed.
M&L for preparation of old surfaces and applying one coat of white wash on celing surface complete all as specified and as directed.
Excavation in post holes or similar holes each not exc 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance nexc 50 mtr and making good surface complete all as specified and directed.
M&L plain cement concrete, Type C-2, 1:3:6 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.
S&F plates (plain or chequered)channels, square cut or notched(odinary and couter sunk) forming holes, without any attachment of Gde Fe 410-W (Gde-E- 250) complete all as specified and as directed.
S&F Mild steel works as in hand rails, wind ties for roof, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets for securing wire etc including all necessary drilling, bolting or riveting, etc; and similar work conforming to Fe 410-0 complete all as specified and as directed.
M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces but n exc 10 cm width or girth complete all as specified and as directed.
M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
S&F Pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or screws J-type or cranked hook bolts complete all as specified and as directed.
S&F Asbestos cement twopiece adjustable plain wing ridge 6mm thick fixed with L-type or Jtype or cranked hook bolts complete all as specified and as directed.
Dismantling wall and ceiling board (fibre,pulp,insulations etc) or insulation board any thickness including cover fillets complete all as specified and as directed.
M&L Anodised alumunium snap grid frame work for false ceiling grid of size 605mmx605mm complete hanges from GI wire complete all as specified and as directed.
S&F 4mm thick texture finish type ceiling board fixed to timber/metal framed work with screw as in ceiling snap grid complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each complete all as specified and as directed.
Re-fixing shutters exc 1 sq.m but n.exc 2sq.m each in same opening complete all as specified and as directed.
S/F 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed.
BHARATI ENTERPRISES
M/S ABHAY KUMAR AND BROTHERS
M/S GYANITECH ENTERPRISES
M/S KAMLESHWAR SINGH
M/s Kundu Enterprises
M/S CITY ENTERPRISES
STAR ENGINEERS AND CONTRACTORS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .