Construction of 33 KV Sub Station Building and Boundary Wall at Mandau

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils (B-44/1.8)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (B-54/3.1.6)

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). (B-69/6.1.6)

Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand). Add extra for Wall upto 30cm. and less thickness. (B-69/6.2.6+6.3.4)

Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand). (B-69/6.2.6)

Add extra for facing as per design and detailed specifications including additional cost of stones Course rubble facing Second sort. (B-70/6.4.2)

Add extra for Random Rubble stone masonry with hard stone in Square or Rectangular pillars (B-69/6.3.1)

Supplying and fixing Soorsagar Bhura or Equivalent ashlar sills, lintels and dassa, bearing, bed & top surface made perfenctly even, jambs, skirting steps etc. rough dressed: Upto 15 cm. thick (B-74/6.27.1)

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix (B-59/4.1)

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix (B-59/4.3)

Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. (B-61/4.9)

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. (B-61/4.10.2)

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Cold twisted deformed bars (IS : 1786). (B-62/4.13.1)

Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (B-55/3.2.4)

Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) (B-66/5.8.3)

Brick work in partition in super structure upto five storey 7cm. thick (brick on edges) using bricks of class designation 75 in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) (B-66/5.10.2)

Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick. (B-72/6.17.3)

Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge Window openable. (B-102/9.28.1)

Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. (B-102/9.26)

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Deep groove pointing (B-143/12.31.3)

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Flush / Ruled/ Struck or weathered pointing. (B-143/12.31.1)

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 25mm thick (B-139/12.3.1)

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick (B-139/12.3.2)

6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) (B-139/12.5)

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 25 mm thick (B-139/12.2.1)

Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. (B-109/10.24)

P&F precast cement concrete copying 1:2:4 mix 50 mm thick complete as per specification. (B-3/3.8))

Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile C (B-99/9.6.2)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Ordinary cement without any pigment. (B-131/11.17.4)

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick . Commercial Veneer both side (B-93/8.13.2.1)

Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm (B-132/11.18.2)

Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001 Sqcm (B-132/11.19.1)

Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. (B-99/9.7)

Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab from 2001 to 5000 Sqcm (B-132/11.19.2)

White washing with lime to give an even shade including all scaffolding: New work (three or more coats). (B-143/ 12.34.1)

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm). (B-145/12.41.1)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (B-146/ 12.46.1)

Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design & IS 6248- 1979. (Clear openable area to be measured for payment). (B-100/ 9.13)

Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge (B-104/ 9.39)

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). (B-86/ 7.12)

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). (B-86/ 7.13)

Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide (B-99/ 9.8)

Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge (B-107/ 10.16)

Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames) (B-100/ 9.12.2)

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr. : All kinds of soil (B-48/ 1.28)

õStructural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in posit

慨物猠瑥洠摡⁥景椠潲㈶•湩氠湥瑧⁨湡⁤慥档猠慥⁴景猠穩⁥㜱砢㠱•楷桴栠湡⁤敲瑳猠牴捵畴敲洠摡⁥景爠畯摮瀠灩⁥∲愠摮猠畱牡⁥楰数㈠砢∱愠摮栠污⁦湩档爠畯摮瀠灩⁥牦浡⁥湩眠楨档瀠牥潦慲整⁤桳敥⁴〲⁧獩映硩摥眠楨档椠⁳畤祬瀠楡瑮摥眠瑩⁨敲⁤硯摩⁥湡⁤湥浡汥瀠楡瑮漠⁦畳牰潩⁲畱㭡楬祴䄮⁳灡摰戠⁹䕓⠠楃楶⥬䨠絵⽓⁆景猠整汥猠潴汯ㄠ∲ㅸ∲ㅸ∸眠瑩⁨㤱浭戠慯摲猠湵業慣琠灯眠瑩⁨敢摡湩⁧楰数ㄠⰢㄠ朸眠瑩⁨湡汧⁥牦浡⹥獁愠灰⁤祢匠⡅楃楶⥬䨠镵牐癯摩湩⁧湡⁤慌楹杮挠浥湥⁴潣据敲整䬠牥⁢瑓湯獥漠⁦楤晦牥湥⁴楳敺⁳湩䴠㌭‰牧摡⁥䴨湡晵捡畴敲⁤楷桴映汵祬洠捥慨楮敳⁤牤⁹慣瑳瀠潲散獳眠瑩⁨潦捲摥愠瑣潩業數⁲桷獯⁥牡獭爠癥汯敶愠潬杮琠敨洠楡硡獩愠摮爠瑯瑡⁥扡畯⁴瑩⁳睯硡獩愠獬Ɐ栠癡湩⁧畨業楤祴猠湥潳⁲潦⁲潭獩畴敲挠湯牴汯漠⁦⽷⁣慲楴湩挠湯牣瑥⁥業⹸䴠湡晵捡畴敲⁤楷桴猠整汥洠畯摬⁳䴨汩敬⁤湡⁤慭畮慦瑣牵摥椠千⁉楤浡湯⁤牯䌠䥓丠瑩潲瀠潲散獳映牯愠捣牵捡⥹漠瑳敥慢敳瀠慬整漠⁦業㘱洠桴捩㭫†慈楶杮嘠扩慲楴湯愠摮瀠敲獳湩⁧捡楴湯戠瑯⁨潴敧桴牥眠瑩⁨琠敨栠汥⁰景洠汵楴汰⁥祳据牨湯獩摥瘠扩慲潴獲‮倠睯牥漠⁦票牤畡楬⁣瑳瑡潩桳畯摬戠⁥業楮畭〵坋映牯挠浯慰瑣潩湡⁤畣敲⁤湩挠湯牴汯敬⁤档浡敢獲栠癡湩⁧畨業楤祴挠湯牴汯愠摮愠瑵浯瑡摥愠物挠物畣慬楴湯猠獹整⥭椠潰楳楴湯琠桴⁥敲畱物摥氠湩ⱥ氠癥汥愠摮挠牵慶畴敲樠楯瑮摥眠瑩⁨散敭瑮洠牯慴⁲㨱″ㄨ䌠浥湥⁴›″潃牡敳猠湡⥤椠据畬楤杮洠歡湩⁧景樠楯瑮ⱳ搠慲湩条⁥灯湥湩⁧桷牥癥牥爠煥極敲⹤楓敺〱〰㑸〵ㅸ〵䈮㜱㈮鈱畓灰楬杮…慬楹杮愠摮吠慲獮‮晏朠慲敶潭牯浡戠湩楤杮洠瑡牥慩慨楶杮倠⁉潮⁴敬獳礠慨‴潴㘠挠浯汰瑥⁥污敬摡愠摮氠晩⁴†獁愠灰⁤祢匠⁅䌨癩汩 畊Δ圀物湩⁧景氠杩瑨瀠楯瑮 慦潰湩⽴攠桸畡瑳映湡瀠楯瑮 慣汬戠汥潰湩⁴楷桴ㄠ㔮猠⹱洠潮業慮楳敺䘠⁒噐⁃湩畳慬整⁤湵桳慥桴摥映敬楸汢⁥潣灰牥挠湯畤瑣牯ㄠㄮ欠⁖牧摡⁥愠摮ㄠ㔮猠⹱洠潮業慮楳敺䘠⁒噐⁃湩畳慬整⁤湵桳慥桴摥映敬楸汢⁥潣灰牥攠牡桴挠湯畤瑣牯ㄠㄮ欠⁖牧摡⁥䤨㩓㤶⤴†湩†敲散獳摥䤠䥓洠牡敫⁤䵍⁓ 卉㤺㌵‷⁐‭䥉⁉ 楶杲湩洠瑡牥慩噐⁃潣摮極⁴…瑩猧†卉⁉慭歲摥⠠卉㌺ㄴⴹ㤱㠸 捡散獳牯敩ⱳ爠畯摮琠汩獥‬⸱′浭琠楨正†潈⁴楄灰摥䜠污慶楮敺⁤潍畤慬⁲潂⁸楷桴攠牡桴琠牥業慮ⱬㄠ䄰䴠摯汵牡猠楷捴ⱨ潍畤慬⁲慦散瀠慬整眠瑩⁨牧摩瀠慬整‬″楰散汩湩⁧潲敳⼠䠠汯敤⁲㌯眠祡挠湯敮瑣牯‬捳敲獷‬洠歡湩⁧潣湮捥楴湯ⱳ琠獥楴杮攠捴‮獡爠煥極敲⹤†潆⁲灳捥晩捩瑡潩景挠灯数⁲䌠湯畤瑣牯‬倠敨潮楬⁣慌業慮整⁤桳敥❴⁳…汅捥牴捩污 楗楲杮愠捣獥潳楲獥爠晥牥䌠慨瑰牥䔠ⴠ〠ⰴ䔠ⴠ〠‵…⁅‭㜰䘠牯愠摤瑩潩慮整档楮慣慰慲敭整獲漠⁦牰摯捵⁴ 潷歲爠晥牥䄠湮硥牵⁥䄧‧瑡慴档摥眠瑩⁨桴獩䈠剓䔠ㄭㄮ⠠⥁猠潨瑲瀠楯杮⠠灵⁴″瑭⹲ ㄨㄮㄮ✩䈨 敍楤浵瀠楯瑮⠠灕潴㘠〮䴠牴⤮ㄨㄮ㈮⤩䌨 潌杮瀠楯瑮⠠灕潴琠〱〮䴠牴⤮ㄨㄮ㌮䨩畓灰祬湩⁧湡⁤牤睡湩⁧剆倠䍖椠獮汵瑡摥☠甠獮敨瑡敨⁤汦硥扩敬挠灯数⁲潣摮捵潴⁲獡瀠牥倠䑗猠数楣楦慣楴湯映牯攠敬瑣楲慣潗歲⁳楷桴䤠䥓洠牡敫⁤䤨㩓㤶⤴愠摮愠⁳数⁲卉㠠㌱‰›〲㌱漠⁦⸱‱噫朠慲敤⸠圠物⁥桳畯摬戠⁥慭敤映潲㤠⸹〹┠瀠牵瑩⁹潣灰牥‬汣獡⁳‵瑳慲摮湩⁧湩愠捣‮潴䤠㩓ㄸ〳䤯䍅㘠㈰㠲映牯†潬敷⁲慷瑴氠獯⁳‬硯杹湥映敲⁥潦⁲敬獳挠慨据獥漠⁦硯摩穩瑡潩Ɱ椠獮汵瑡潩噐⁃祴数䄠䌯䐯Ⱐ映慬敭爠瑥牡慤瑮愠⁳数⁲卉ㄠ㠰〱㔭ⰳ戠瑥整⁲浡数慲敧爠瑡湩⁧獡瀠牥䤠㩓㤳ㄶ瀠牡⁴ⰵ†湩攠楸瑳湩⁧猠牵慦散漠⁲敲散獳摥倠䍖 卍挠湯畤瑩振獡湩⁧慣灰湩⁧慭楫杮挠湯敮瑣潩獮眠瑩⁨潃灰牥䰠杵⁳景猠極慴汢⁥楳敺‬敆牲汵獥琬獥楴杮攠捴‮獡爠煥極敲⹤传䵅䴠獵⁴慨敶椠獴漠湷椠潨獵⁥䅎䱂氠扡猠瑥灵映牯愠汬琠獥楴杮映捡汩瑩敩⁳潦⁲楷敲⹳†䘠牯愠摤瑩潩慮整档楮慣慰慲敭整獲漠⁦牰摯捵⁴ 潷歲爠晥牥䄠湮硥牵⁥䄧‧瑡慴档摥眠瑩⁨桴獩䈠剓††′⁸⸲‵煳‮浭‮‫砱⸱猵浱ⵅ㐠ㄮ㜮+⠀⥂㈠㑸〮猠⹱洠‫砱㈠㔮猠ⁱ浭⠠䔠㐭ㄮㄮ⤴́圀物湩⁧景㌠㔯瀠湩㘠愠灭‮楌桧⁴汰杵瀠楯瑮眠瑩⁨⸱‵煳‮浭渠浯湩污猠穩⁥䘠⁒噐⁃湩畳慬整⁤湵桳慥桴摥映敬楸汢⁥潣灰牥挠湯畤瑣牯ㄠㄮ欠⁖牧摡⁥愠摮ㄠ㔮猠⹱洠潮業慮楳敺䘠⁒噐⁃湩畳慬整⁤湵桳慥桴摥映敬楸汢⁥潣灰牥攠牡桴挠湯畤瑣牯ㄠㄮ欠⁖牧摡⡥卉㘺㐹 †湩†敲散獳摥䤠䥓洠牡敫⁤䵍⁓ 卉㤺㌵‷⁐‭䥉⁉ 噐⁃潣摮極⁴…瑩猧䤠䥓洠牡敫⁤䤨㩓㐳㤱ㄭ㠹⤸捡散獳牯敩ⱳ䠠瑯䐠灩数⁤慇癬湡穩摥†潍畤慬⁲潢⁸景ㄠ㈮洠桴捩楷桴攠牡桴琠牥業慮ⱬㄠ‰⁁潭畤慬⁲猠楷捴ⱨ㌠㔯瀠湩㘠䄠洠摯汵牡猠捯敫ⱴ䴠摯汵牡映捡⁥汰瑡⁥楷桴朠楲⁤汰瑡ⱥ†猠牣睥ⱳ洠歡湩⁧潣湮捥楴湯ⱳ琠獥楴杮攠捴‮獡爠煥極敲⹤†潆⁲灳捥晩捩瑡潩景挠灯数⁲䌠湯畤瑣牯‬倠敨潮楬⁣慌業慮整⁤桳敥❴⁳…汅捥牴捩污 楗楲杮愠捣獥潳楲獥爠晥牥䌠慨瑰牥䔠ⴠ〠ⰴ䔠ⴠ〠‵…⁅‭㜰䘠牯愠摤瑩潩慮整档楮慣慰慲敭整獲漠⁦牰摯捵⁴ 潷歲爠晥牥䄠湮硥牵⁥䄧‧瑡慴档摥眠瑩⁨桴獩䈠剓†††††传潢牡⁤ⵅㄠ㌮ㄮŤ匀䘦映汯潬楷杮猠穩獥⠠楤⹡ 景䤠䥓洠牡敫⁤楶杲湩洠瑡牥慩䵍⁓ 卉㤺㌵‷⁐‭䥉⁉ 噐⁃潣摮極⁴污湯⁧楷桴†卉⁉慭歲摥⠠卉㌺ㄴⴹ㤱㠸 捡散獳牯敩⁳獡爠煥極敲⁤椠爠捥獥⁳椠据畬楤杮†畣瑴湩⁧桴⁥慷汬‬潣敶楲杮挠湯畤瑩愠摮洠歡湩⁧潧摯琠敨猠浡⁥獡爠煥極敲⹤䘠牯愠摤瑩潩慮整档楮慣慰慲敭整獲漠⁦牰摯捵⁴ 潷歲爠晥牥䄠湮硥牵⁥䄧‧瑡慴档摥眠瑩⁨桴獩䈠剓䔠‭⸱⸴眲畓灰祬湩⁧湡⁤楦楸杮漠⁦潰敷⁲汰杵瀠楯瑮眠瑩⁨潍畤慬⁲捡散獳牯敩⁳†獡瀠牥倠䑗猠数楣楦慣楴湯映牯攠敬瑣楲慣潗歲ⱳ漠潨⁴楤灰摥朠污慶楮敺⁤潭畤慬⁲潢⁸景ㄠ㈮洠桴捩楷桴攠牡桴湩⁧整浲湩污振湯敮瑣牯漠畳晲捡⁥牯椠敲散獳摥眠瑩⁨畳瑩扡敬猠穩⁥景洠摯汵牡映捡⁥汰捡⁥楷桴朠楲⁤汰瑡⁥湡⁤潣敶⁲汰瑡⁥湩汣摵湩⁧潣瑳漠⁦䤠䥓洠牡敫⁤潭畤慬⁲㘱愠灭‮睓瑩档⠠卉㨠㠳㐵 湡⁤⼶㘱愠灭‮潳正瑥漠瑵敬⁴䤨㩓㈱㌹ 慭楫杮挠湯敮瑣潩‬整瑳湩⁧‬瑥⹣愠⁳敲畱物摥‮潆⁲灳捥晩捩瑡潩景†楗楲杮愠捣獥潳楲獥爠晥牥䌠慨瑰牥†⁅‭㜰†敲慬整⁤瑩浥☠䘠牯愠摤瑩潩慮整档楮慣慰慲敭整獲漠⁦牰摯捵⁴ 潷歲爠晥牥䄠湮硥牵⁥䄧‧瑡慴档摥眠瑩⁨桴獩䈠剓䔠㜭㌮䀷
⁐…⁆慰数⁲桰湥汯捩爠獥湩戠湯敤⁤氠浡湩瑡獥挠湯楦浲湩⁧潴䤠⁓›〲㘳ⴠ†㤱㔹映牯戠硯獥 牦浡獥椠据畬楤杮洠歡湩⁧潨敬⁳潦⁲睳瑩档獥攠捴‬楷桴戠慲獳猠牣睥ⱳ眠獡敨獲 楺据瀠慬整⁤渠瑵愠摮戠汯獴愠⁳敲畱物摥‮潆⁲摡楤楴湯污琠捥湨捩污瀠牡浡瑥牥⁳景瀠潲畤瑣⼠眠牯敲敦⁲湁敮畸敲✠❁愠瑴捡敨⁤楷桴琠楨⁳卂㑒㠮洠桴捩ⵅ㔠㔮㈮ͬ倀灩⁥慅瑲楨杮†獡瀠牥䤠㩓〳㌴‭㤱㜸眠瑩⁨⸳‰瑍⹲䰠湯Ⱨ㐠‰浭搠慩‮‧⁂‧汣獡⁳⹇⹉倠灩⁥卉›㈱㤳⠠慐瑲ㄭ 〲㐰‬煅極慶敬瑮琠卂㨠ㄠ㠳‷楷桴瀠牥潦慲整⁤潨敬⁳景ㄠ′浭搠慩Ⱐ湩汣摵湩⁧污捡散獳牯敩⁳楬敫渠瑵‬潢瑬ⱳ爠摥捵牥‬楮灰敬‬楷敲洠獥敨⁤畦湮汥‬湡⁤效癡⁹畤祴眠慥桴牥瀠潲景瀠汯⵹牰灯汹湥⁥慥瑲⁨楰⁴档浡敢⁲楷桴氠捯慫汢⁥慊牦敥氠摩猠極慴汢⁥潦⁲慳敦眠牯楫杮氠慯⁤〵〰䬠⁧牯洠牯⁥景猠穩⁥潔⁰楄⹡㈠㔲琠㘲‰浭‬潂瑴浯䐠慩㌠〰琠㔳‰浭‮湡⁤效杩瑨†㔲‰潴㌠〰洠⹭愠摮攠扭摯楹杮琠敨瀠灩⁥挠浯汰瑥⁥楷桴愠瑬牥慮整氠祡牥⁳慳瑬愠摮挠歯⽥挠慨捲慯ⱬ琠獥楴杮漠⁦慥瑲⁨敲楳瑳湡散映牯瘠污敵漠⁦‵桯獭漠⁲敬獳†獡爠煥極敲⁤…畭瑳爠捥牯⁤祢攠杮湩敥⁲湩挠慨杲⁥畤楲杮猠瑩⁥楶楳⁴湡⁤湥畳敲琠湥整⁲湩洠慥畳浲湥⁴潢歯䄮汬愠⁳数⁲牰⁥灡牰癯摥戠⁹湅楧敮牥椠档牡敧‮䘠牯愠摤瑩潩慮整档楮慣慰慲敭整獲漠⁦牰摯捵獴 潷歲†‬敲敦⁲†湁敮畸敲∠≁愠瑴捡敨⁤楷桴琠楨⁳卂⁒‮†ⵅㄠ⸴�牐癯摩湩⁧…楆楸杮漠⁦㐲⼰ㄴ‵⁖䍁䴠䉃眠瑩⁨潰楳楴敶椠潳慬楴湯漠⁦〱欠⁁牢慥楫杮挠灡捡瑩⁹䈨 ⽃⁄牴灩楰杮挠慨慲瑣牥獩楴⁣獡瀠牥琠灹⁥景氠慯⁤湡⁤猠瑩⁥敲畱物浥湥⥴㐠䬠⁖浩異獬⁥楷桴瑳湡⁤潶瑬条ⱥ䤠䥓洠牡敫⁤卉㠠㈸⠸㤱㘹 潣普牯業杮琠䕉⁃〶㤸ⴸ‱〲㈰‬䕉⁃〶㐹ⴷⰲ氠睯眠瑡⁴潬獳獥‬牴灩映敲⁥敭档湡獩浵Ⱐ攠敮杲⁹楬業楴杮漠⁦挠慬獳㌠愠⁳数⁲䕉ⱃ†業楮畭桰獡⁥整浲湩瑡潩慣慰楣祴漠⁦㔳煳洮⹭Ⱐ挠湯畤瑣牯氠湩⁥潬摡爠癥牥楳楢楬祴Ⱐ䤠⁐〲挠湯慴瑣瀠潲整瑣潩湡⁤楦瑴摥椠攠楸瑳湩⁧楤瑳楲畢楴湯戠慯摲猯敨瑥ⱳ洠湩浩浵攠敬瑣楲慣灯牥瑡潩〲〬〰甠瑰〲䄠爠瑡湩⁧湡⁤〱〬〰甠瑰㌶䄠‬〵〰映牯㠠‰⁁…扡癯⁥慲楴杮†湩汣摵湩⁧慭楫杮挠湯敮瑣潩獮‬整瑳湩⁧瑥⹣愠⁳敲畱物摥‮䕏⁍桳污慨敶猠扵業⁴丠䉁⁌ 偃䥒⼠䔠䑒⁁捡牣摥慩整⁤†慬⁢祴数琠獥⁴敲潰瑲⁳☠䄠汬愠⁳数⁲牰⁥灡牰癯摥戠⁹湅楧敮牥椠档牡敧‮潆⁲摡楤楴湯污琠捥湨捩污瀠牡浡瑥牥⁳景瀠潲畤瑣⼠眠牯敲敦⁲湁敮畸敲✠❁愠瑴捡敨⁤楷桴琠楨⁳卂⁒楓杮敬瀠汯⁥䍍⁂†在瑩⁨⽂⁃畣癲⁥牴灩楰杮䌠慨慲瑣牥獩楴獣 †‶⁁潴㌠′⁁慲楴杮⠠ⵅ㜱㘯ㄮㄮ㈮ԩ牐癯摩湩⁧…楆楸杮漠⁦㐲⼰ㄴ‵⁖獩汯瑡牯†卉⁉慭歲摥䤠㩓㌱㐹ⴷ䥉⽉潣普牯業杮琠䕉⁃〶㐹ⴷⰳ猠極慴汢⁥潦⁲䍁㈲⁁瑵汩穩瑡潩慣整潧祲‬䬴⁖浩異獬⁥楷桴瑳湡⁤潶瑬条ⱥ†牴敵挠湯慴瑣椠摮捩瑡潩Ɱ††敒⁤潣潬牵搠汯祬⼠氠癥牥猠慨汬栠癡⁥楳杮敬洠畯摬挠癯牥湩⁧癯牥愠汬瀠汯獥映牯漠数慲楴湯Ⱐ琠潷瀠獯瑩潩楤慲汩洠畯瑮湩Ⱨ†業楮畭桰獡⁥整浲湩瑡潩慣慰楣祴漠⁦㔳煳洮⹭†偉㈠‰潣瑮捡⁴牰瑯捥楴湯愠摮映瑩整⁤湩攠楸瑳湩⁧楤瑳楲畢楴湯戠慯摲⼠猠敨瑥†湩汣摵湩⁧慭楫杮挠湯敮瑣潩獮‬整瑳湩⁧瑥⹣愠⁳敲畱物摥‮䕏⁍桳污慨敶猠扵業⁴丠䉁⁌ 偃䥒⼠䔠䑒⁁捡牣摥慩整⁤†慬⁢祴数琠獥⁴敲潰瑲⁳☠䄠汬愠⁳数⁲牰⁥灡牰癯摥戠⁹湅楧敮牥椠档牡敧䘮牯愠摤瑩潩慮整档楮慣慰慲敭整獲漠⁦牰摯捵⁴ 潷歲爠晥牥䄠湮硥牵⁥䄧‧瑡慴档摥眠瑩⁨桴獩䈠剓䐠畯汢⁥潰敬椠潳慬潴⁲〳䄠⼠㐠‰⁁慲楴杮⠠ⵅ㠱㘯㈮ㄮㄮ㔩
⁐…⁆⸱洲桴捩䴠

S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR E- 5.95SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 0.5 HP, 1-Ø, (3 - 18)Mtr, (100-26) LPM E- 21.7.1˜
Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity >95% thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 10 SWG G.I. ( Hot Dipped ) Wire E- 14.6.92
Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy e" 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.e"0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing E- 17.2.2ÂProviding & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc

Supply & fixing direction and place identification board made out of 2mm thick MS sheet framed to angle iron 40X40X5 mm and two vertical posts of angel iron of size 65x65x6 mm 3 m long with hold fast stove enameled paint reflective letter symbol complete of size 90cmX60cm. As per Dy CE Ju