CWE/GGN/GT-47/2021-22 CERTAIN REPAIRS TO JOINERY, PLASTERING, FLOORING, WATER SUPPLY AND SAINTARY FITTINGS, MISC REPAIR WORKS TO OTM ACCN AND INSTALLATION BLDG AT AFSSR GURGAON UNDER GE (AF) GURGAON

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and as directed.

Demolition of Cement Concrete in sunken floors and pavings exc 15 cm thickness above ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed

Dismantling Floor, Paver Tiles, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) complete all as specified and directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed

Dismantling damaged/unserviceable Frame of Aluminium Doors, Windows, Ventilators and Partition, etc. of any description, complete all as specified and as directed.

Dismantling damaged/unserviceable Shutter of Aluminium Doors, Windows and Ventilators of any description, complete all as specified and as directed.

Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads and removal for site complete all as specified and directed by Engineer-in-Charge

Taking down cast iron soil waste and vent pipes of any description with fitting and making good to disterbed surfaces.

Taking down or up galvanised steel tubing 15mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed

Taking down or up galvanised steel tubing 20mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed

Dismantling damaged/unserviceable GI Snap Grid Ceiling Frame Work with Ceiling Boards of any description, complete all as specified and as directed.

Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed.

Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

M&L Brick Work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 5.00 here-in-before) after removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed. NOTE: WPC will be Measured and Paid under appropriate Item. Area includes in this items upto 4 stories of building.

M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts in patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface.

M&L preparing newly Plastered surfaces of Walls upto four storey by applying 1 mm Wall Putty, cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing new Plastered surfaces of Walls by applying Wall Care Putty 1 to 1.5 mm thickncluding Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.

M&L for One coats of white wash on old plaster surface of ceiling including prepration of surface.

M&L for preparation of old plaster surface of walls and applying two coats of white wash over a coat of cement primer complete as specified and as directed.

M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L for preparing Old plastered surface of walls and applying one coat of oil emulsion distemper white or any tint etc complete as specified and directed

M&L preparing old Plastered Surfaces of Walls upto four storey by Complete Removal of existing Surfaces Treatment and applying Wall Putty 1 to 1.5 mm thick , cutting /rubbing to obtained a Smooth Surface and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed. Note: Contractor to submit all the Paint qty in 20 Ltr Buckets in Engr-in- Charge office and susequent bucket will be isued to contractor as per requirement and contractor has to deposit emty bucket after completion of work.

Material & Labour preparing old Decorated/Treated Plastered surfaces of Walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm

M&L preparing old Decorated/Treated Plastered surfaces of Walls upto four storey and applying Two Coats of Cement paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed

M&L preparing new or previously untreated Plastered/ Concrete Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS Squre Tube in opening etc complete all as specified and as directed

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including rawl plugs etc in the frame at site as per specification & drawing etc complete all as specified as directed.

S&F IInd class hard wood 35mm thick Plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and directed

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete

S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, with bolt complete all as specified and directed

S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, with bolt complete all as specified and directed

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.

S&F stainless steel 100 mm long butt hinges for PVC door shutters and frames complete all as specified and directed by Engineer-in-Charge.

Supply & fixing Butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed

S&F 150mm long ordinary rat tail rod pattern spring, including roller and roller plate.

M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in Roof Covering/ Cladding to Wall, fixed with self-tapping Screws, complete all as specified and as directed

M&L for Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking coloured paving block of glass fibre reinforced vibro compacted any shape and size conforming to IS-15658:2006 of 60mm thickness made with M-35 grade concrete match with grey cement and pigment etc complete all as specified and directed.

M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.

M&L Vitirified Ceramic Tiles 10mm thick (Square/Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Vitirified Ceramic Tiles 10mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Mortar shall deem to be include in the Quoted Unit Rate.

M&L for non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 400mmx400 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Rendering Cement Mortar shall deem to be include in the Quoted Unit Rate.

M&L for exterior grade coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specified and directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base (Levelling course for laying Tiles in Flooring), complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and as directed .

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for granite (Black) stone slab 18-20mm thick machine cut and machine polised, in skirting, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge.

S&F 15 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, incl Taking down or up steel tubing 15mm bore and connections complete all as specified and direced.

S&F 20 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, incl Taking down or up steel tubing 20mm bore and connections complete all as specified and direced.

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr.

Disconnecting existing tanks 500 ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc and write date of cleaning on tank complete all as directed by Engr-in-Charge.

Disconnecting existing tanks Exc 500 ltr but nexc 1000 Ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc and write date of cleaning on tank complete all as directed by Engr-in-Charge.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed

S&F in repair angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore dia pipe complete all as specified and as directed

S&F in repair Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed 15 mm dia bore dia pipe complete all as specified and as directed.

S&F in repair Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed.

S&F in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

S&F Sink with Drainage Board made of Stainless Steel l.0mm thick Kitchen or Laboratory overall size 810x510x205mm having Bowl size 405x354x203 mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe and fixed-in-repairs, complete all as specified and as complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : HINDUSTAN SANITARYWARE 21027/ JAQUAR CNS-WHT553SN/ PARRYWARE C-0252(S) or eqivalent in CERA (as approved by GE)

S&F Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR CNS-WHT-111N or eqivalent in CERA/ HINDUSTAN SANITARYWARE/ PARRYWARE (as approved by GE)

S&F One Piece Euorpen Water Closet Concealed of size 790x360x650mm Snow White, Soft Close Seat Cover having Twin Flush Fittings and Making Good to Floor/ distrubed Surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR SLS-WHT-6851S (WC), or eqivalent in CERA/ HINDUSTAN SANITARYWARE/ PARRYWARE (as approved by GE)

S&F Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) and fixed-in-repairs, complete all as specified and as directed. MAKE : GEM/ JAQUAR/ MARC (as approved by GE).

S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed. MAKE : JAQUAR ALD-CHR-585 or equivalent in GEM/ MARC (as approved by GE).

M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.

S&F Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete all as specified and as directed. MAKE : PARRYWARE / JAQUAR/ ESSCO (as approved by GE)

S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and directed.

S&F in repair Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and directed by Engineer-in-Charge

S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and directed by Engineer-in-Charge

S & F for 50 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls including necessry GI stack clamps complete all as specified and directed by Engineer-in-Charge

S & F for 100 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge

S & F for 100 mm bore cast iron branch piece, "T" , single (equal or unequal) ordinay or inverted (spigot or socket type ) or with parallel branches complete all as specified and directed by Engineer-in-Charge

S & F for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and directed by Engineer-in Charge

S & F 75 mm bore cast iron T including jointing and laid in trenches complete all as specified and directed by Engineer-in-Charge

S & F for 75 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge

S & F cast iron cowls of 50 mm size complete all as specified and directed by Engineer-in-Charge

S&F Aluminium anodized powder coated Window Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/central Rail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate.

S&F in repair Coloured PVC Board 18 mm thick as required in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, one side plain , jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws,including Locking Arrangements, complete all as specified and as directed. complete all as specified and as directed. Make : Rajshree, Centuryply, sintexplastic

S& in repair Frog hinges/slip on cabinet hinges by making adequate hole in 18 mm board from inside and fixed to cupoard shutter and frame by screw, complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed.

M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent as approved by Engrineer-In-Charge as in Roof portion where leakage and seepage are noticed including preparing of surface by removing existing treatment complete all as specified and as directed by approved applicater. Note :- Authorised applicater is approved by GE.

S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of 'J' Bolt, complete all as specified and as directed.

M&L 4 mm thick designer Fibre cement board Tile of size 595x595 mm of approved texture, blossom, fixture and primer finished complete , complete all as specified and as directed by Engr-in- Charge Note : Weight not less than 4.84 Kg /m2

M&L for preparation of new steel surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for Running welding in repairs thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specifed and as directed

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, roof padding, staging of water tank, benching etc and similar nature of works mixed with water liquid proofing admixture as per manufacturer's instruction including finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and directed by Engineer-in-Charge. Note :- (i) WPC shall be measured and paid separately. (ii) Rates include to carried out the work on roof slab upto 4th stories building & nothing extra shall be admissible on this account).

M&L RCC Pre-cast Cement Concrete 1:2:4 (12.5mm graded stone aggregate) as in Louvres and Jallies, 40mm thick (measured solid) with all mouldings including Reinforcement with 5.0-6.0mm dia Mild Steel Bars/ Wire and setting in Cement Morter 1:4 including dismantling Pre-cast RCC Cement Concrete Louvres and Jallies of any description, removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. NOTE : Cost of Mild Steel Bars/Wire as Reinforcement will deem to be included in the Quoted Unit Rate.

S&F Aluminium Anodised powder coated Door Shutter with Frame 101.40x44.45mm having size of Long Rails/Style, Top and Middle/ Centre Rail shall be 84.40x44.45mm and Bottom Rail shall be 110x44.45mm of Aluminium Sheet shall be 16 gauge, Panels shall be provided with 5.0mm thick Sheet Glass and with 12mm thick PVC Sheet best quality (as approved), Jointing Cleats and Fixing Accessories including Locking Arrangement, fixed with Hinges to the Frame or Slididng Type or Pull & Push Type Shutters including Glazing Clip, Rubber Beading, Aluminium Handle of size 150mm (2 No.), Mortice Lock of size 100 mm MS 4- lever (1 No.) and all necessary Fittings and Fixtures¸complete all as specified and as directed. MAKE : HINDALCO/ INDALCO/ JINDAL

Taking down aluminium window of any description not exc. 2.00 Square Metre Each and Refixing in the Same or other Opening, after resecuring or easing and adjusting, including jointing cleats and necessary fittings, complete all as specified and as directed.

Repairing of Aluminium Door, Windows, Ventilators Shutter Fixed/ Side Hang, Sliding Type/Partition including taking down, refixing with minor adjustment for opening and closing properly with replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and as directed. NOTE : Quoted Unit Rate shall deem to be include Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. required/ordered at Site.

M&L Aluminium anodised Frame for Doors, Windows, Ventilators, Partitions, etc. having Powder Coating (minimum thickness of Powder coating 50 micron) with one or more rebates including Joining Cleat for fixing, etc., complete all as specified and as directed.

S&F as in repair Door Spring of Mild Steel 150mm long, Ordinary Rat Tail type, Rod patteren Springs including Roller and Roller Plate welding with frame , etc., complete all as specified and as directed.

S&F Mild Steel Mortice Lock 100mm in size, 4-Lever, Vertical type and fixed-in-repairs, complete all as specified and as directed.

S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram and fixed-in-repairs, complete all as specified and as directed.

S&F Double Action Floor Spring hydraulically regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, other Parts made of Mild Steel heavy duty and fixed-in-repairs, complete all as specified and as directed.

S&F Sheet Glass 5.0mm thick, Tinted (as approved by GE) fixing to Aluminium Window including replacement of Rubber Packing and refixing Aluminium Beading, complete all as specified and as directed. NOTE : Cost of Rubber Packing shall deem to be include in the Quoted Unit Rate.

S&F Sheet Glass 5.0mm thick, Frosted (as approved by GE) fixing to Aluminium Window including replacement of Rubber Packing and refixing Aluminium Beading, complete all as specified and as directed. NOTE : Cost of Rubber Packing shall deem to be include in the Quoted Unit Rate.

M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutters, having Outer Frame of Section 50x25mm and Inner Frame of Section 40x20mm, jointed internally with Mild Steel Flat Iron 40x3mm complete with Stainless Steel Tower Bolts, Hinges, Handles, Stops, Lugs, etc. including Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm, etc., complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement and Payment Double Shutters with Frame shall be considered as ONE UNIT. (b) Unit Rate quoted shall deem to be include all the Stainless Steel Builders & Hardware as required/directed at Site. (c) Quoted Unit Rate shall also deem to be include Mild Steel Guard Bars of 10mm Square Bar, spacing at 10 Cm centre to centre on both Vertical & Horizontal directions. (d) Sheet Glass shall be Measured and Paid for separately under appropriate Item.

M&L Taking down existing Steel Rolling Shutter including Hood Cover, Pull and Push type, area not exc. 8.0 Sqm Each, Sides of clear Opening and Cleaning the Side of Shutter Suspension Shafts, Anti-guide Channels and Greasing all the Moving Parts of the Rolling Shutter and straightening Rolling Shafts and replacement of Bolts, Nut, etc. as required for Smooth Functioning of Shutter and Re-fixing the same including Hood Cover, complete all as specified and as directed.

Net Contract Sum will be after deducting Sch of Credit of Rs 41810.00

M/S Rohit Enterprises

Chaudhary Constructions

PAWAN KUMAR

MRITUNJYA ASSOCIATES

Goyal Enterprises

k k enterprises