REPAIR/REPLACEMENT/CLEANING OF BOUNDARY WALL DRAIN, PRECAST COVER SLAB AND FENCING WORKS AND SEWAGE LINE, SEPTIC TANK, MANHOLES, SOAK WELL, COVER SLAB ETC FOR OUTSIDE POCKET AREA AT AF STN GWALIOR

Amount

Cleaning of chocked /blocked sewage lines of any bore, of any description and in any position by taking out loose sediment sand, grit, ash, sludge, rags, fibers or vegetation from the following depth of sewage line or by rodding/by mechanical means and well flushing with adequate water including removal of sludge/debris to a distance exc 250 m but nex 500m and buried under ground complete all as as specified and as directed. (a) Upto 1.00 M depth

(b) Exceeding 1.00 M and n exc 1.5 M depth

(c ) Exceeding 1.5 M and n exc 3.00 M depth

Opening & cleaning of blockage from kitchen /bath traps or WC any pattern by rodding or manually upto Ist manhole complete all as directed .

Cleaning of manholes of depth not exc 1.5 M deep mechanically or manually by taking off sludge/any deletrious material from the existing manhole of any size and removing the sludge to a distance beyond 2.00 KM from the habitation in sealed container and depositing the same complete all as specified and directed.

All as per item No-3 here in before but depth exc 1.5 M and n exc 3.00 M deep complete all as specified and directed

M&L for puncturing existing RCC/ SGSW pipe line of any dia at any places between manholes for cleaning blockage in pipes including necessary excavation, returning, filling in and removal of soil and making good the punctured area with CM 1:1 including cutting/ clearing away grass, vegetation, saplings, shrubs, bush, wood, undergrowth, roots along pipeline both sides upto a distance 2 Metre complete all as specified and directed.

Demolition of brick work built in cement mortar and incl all quins, arches, pillars etc complete all as specified and directed

M&L for brick work with sub class 'B' bricks old size , straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and as directed.

All as per item No. 7 here-in-before but except bricks complete all as specified and directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick plaster in CM 1:4 on fair faces of brick work , finished even & smooth without using extra cement mixed with and incuding water proofing compound as per manufacturers instructions complete all as specified and directed.

M&L for 15 mm thick plaster in CM 1:6 on fair faces of brick work , finished even & smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (Powder) complete all as specified and directed. Make: Water Seal from Acro Paint, Impermo from Snowcem, Accoproof from ACC, Pidilite Industries Ltd

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate), as in coping, benching, kerbs, bedblocks including necessary form work complete all as specified and as directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including replacement of cast iron P Trap of size 100 mm including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR complete all as specified and directed.

Cutting of trees' roots penetrated into manholes /sewage line /trap etc of any girth and at any depth including application of hot bitumen to arrest sprouting and filling up the gap and making good the disturbed portion with and including cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

Excavation in trenches in soft/loose soil n exc 1.5 M wide & n 'exc 1.5 M in depth as in foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches in soft/loose soil n exc 1.5 M wide, 'exc 1.5 M but not exc 3.0 M in depth as in foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Demolition and breaking up drain pipe, soil waste and vent pipe (CI/SGSW/RCC pipe) including fittings of any size laid in trenches or in floors etc jointed in cement mortar complete all as specified and as directed.

Demolition and breaking up of 75/110 mm bore PVC/CI pipes fixed along walls/floors etc complete all as specified and directed.

Returning & filling- in soil including spreading, levelling watering and well ramming in layers not excd 25 cm thick each complete all as specified and as directed.

Removing excavated material to a distance exc 0.50 Km but not exc 1.5 km and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

M&L for 150 mm dia internal SGSW pipes Gde 'A' quality laid in trenches jointed in CM 1:1 and tested after the pipes are laid and jointed complete all as specified and as directed.

S&F 200 mm bore reinforced concrete pipes class NP-2, laid in trenches and jointed with collars complete all as specified and directed.

S&F 150 mm bore reinforced concrete pipes class NP-2, laid in trenches and jointed with collars complete all as specified and directed.

M&L for concrete bed to pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid to slope and tested for 150 mm bore sewer pipe line complete all as specified and directed .

M&L for concrete bed to pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid to slope and tested for 200 mm bore sewer pipe line complete all as specified and directed .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 6 to 8 mm dia mild steel TMT bars , cut to length, bent to shape required, including cranking, bending for slab , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for 10 mm dia and over mild steel TMT bars , cut to length, bent to shape required, including cranking, bending for slab , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for precast RCC 1:1.5:3 mix, type A1 (using 20 mm graded stone aggregate) as in cover slab set in CM 1:4 incl necessary form work complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including cutting out wall/concrete and finishing of surface to match existing surface complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipe bend with accessible door of 75 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F in repair PVC (SWR) pipe bend with accessible door of 110 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F in repair PVC (SWR)branch piece single (single Y) equal or unequal bend with accessible door of 75 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F in repair PVC (SWR)branch piece single (single Y) equal or unequal bend with accessible door of 110 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F in repair PVC (SWR) junction single (single T) equal or unequal with accessible door of 75 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F in repair PVC (SWR) junction single (single T) equal or unequal with accessible door of 110 mm bore size including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR)vent cowl all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) bends any radius all as specified and directed.

S&F in repair 110mm dia PVC (SWR) bends any radius all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm outlet dia plain with grating including jointing with solvent cement including cutting out wall/concrete and finishing of surface to match with existing surface complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 CM thickness below or above ground level complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing & rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic tiles ( 450 x 300 mm size) 6-7 mm thick coloured for work on vertical surfaces such as skirting and dado/riser etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces as in backing for tiles in dados/skirting complete all as specified and directed.

S&F 40 mm thick Pre cast cement concrete jallies type Bo 1:2:4 (12.5mm graded aggregate) set in cement mortar 1:6 including all mouldings, chamfers, weathering, throating etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B1 ( using 20 mm graded aggregate) as in surface channels, drain and similar nature of work complete all as specified and as directed.

M&L for extra forming fair finished drain or channel 30 cm innner girth in cement concrete using extra cement including forming moulds mitred/stopped ends etc complete all as directed by Engineer-in-charge

All as per Item above but add or deduct for each 25mm girth.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in beching with using pigment in cement complete all as specified and directed

M&L RCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in fixing of concrete jallies (Jafri) on and above the brick work at any height and position including necessary form work etc, finish even & fair without using extra cement, complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

All as per sl item above but embedded in natural ground.

Dismantling fencing wire mesh,any type,complete all as specified and directed.

M&L for plain cement concrate1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundaion filling etc, complete all as specified & derected

S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified and directed

Supply only galvanised chain link fencing , size of aperture and dia of wire as approved by GE any size or type as approved by Engr-in -charge etc, complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed

M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed

M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified and directed

S&F, in repairs galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2mm dia bards at 75mm spacings and straining and fixing to any type of standerd rails straining bolts, including, seuring or tying at crossings with and provision of galvanised mild steel wire, staples etc. complete all as specified.

M/s Pal Construction

m/s vikash Engineers

M/s Jai Durga Construction

GWALIOR TRADE LINK

M/s Anjali Construction