PROVN OF HARDSTANDING AND ALLIED INFRA IN FRONT OF HQ NC CAMP JCO MESS AT HQ NORTHERN COMD AND SPL REPAIR TO BLDG NO NP40 AT HQ NORTHERN COMD UNDER GE SOUTH UDHAMPUR

Amount

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out of soft/loose soil complete all as specified.

Excavation over areas, not exc 1.5 mtr deep in soft/loose soil and getting out complete all as specified and directed

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm thick all as specified and directed.

Removing excavated soil material to a distance n exc 50 m and deposited where directed at a level not exc 1.5m above the base as in soil all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for RCC M-25 (Design mix) in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter on rough finished surfaces of concrete complete all as specified and as directed.

M&L walling of random rubble uncoursed well bonded bedded and solidly hearted built in cement mortar (1:6) all as specified and directed

M&L for raised pointing to random rubble or polygolal rubble uncoursed of brought upto courses in CM 1:4 complete all as specified.

M & L for hand packing (any thickness) of broken stone or boulder at back of walls over arches etc and raising (or lowering) to the required level all as specified and directed

M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed.

S & F 110mm dia PVC (SWR) pipes single stack in any length as in weepholes of retaining wall all as specified and directed

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) as in coping, benching and similar work etc including necessary form work complete all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in drain, walls and similar work etc complete all as specified and as directed.

M & L Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in drain etc and similar work all as directed

M&L hardcore of broken bricks gauge exc 63mm but n.exc 100mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled /rammed to true surfaces complete all as specified

M&L for Rolling and consolidating formation surfaces in cutting with exc 8 tonne and n exc 12 tonne power roller complete all as specified and as directed.

M&L for 75 mm thick PCC type C-2 1:3:6 , using 40mm graded crushed stone aggregate as in sub base for receiving floor finishes finished even and fair complete all specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each and removing complete all as specified.

Taking down cement plaster of any descreption on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified.

S&F steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete but gear operated type with bevel gear box and crank handle complete all as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F Ball bearing for rolling shutters complete all as specified and as directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out in soft/loose soil, complete all as specified.

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified.

M&L for brick work with sub class 'B' bricks exc 6m mean radius straight or curved on plan built in cement mortar 1:4 complete all as specified and as directed.

M&L 75mm thick cement concrete 1:3:6 type B2 using 40mm graded stone aggregate as in plinth protection complete all as specified.

M&L for brick work with sub class 'B' bricks exc 6m mean radius straight or curved on plan built in cement mortar 1:6 complete all as specified and as directed.

M & L for PCC 1:2:4 Type B-1 using 20 mm graded aggregate in surface channels and drains complete all as specified.

M&L for cement concrete type B1 1:2:4 (using 20 mm gradded aggregate) use in coping, hold fast and similar work including naccesary form work complete all as specified and directed.

M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all as directed

M & L Rendering 10 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement all as directed

M&L for random rubble masonry built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted complete all as specified .

Raised pointing to Square rectangular, random rubble stone masonary in cm 1:4 complete all as specified.

M&L for 75 mm thick PCC 1:4:8, type D-2 by using 40 mm graded stone aggregate as in sub base floor complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

M&L for vitrified tiles (double charge glossy finish), area of each tilen exc 0.36Sqm, 8-10mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for machine cut Kota stone slab flooring 18-20mm thick over cement screed base 15 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Dura stone heavy duty vitrified tiles of size area of each tiles not exc 0.36 Sqm of 10mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface including 15mm thick screed bed in CM 1:6 complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M & L for providing Precast RCC 1:2:4 type B1 using 20mm graded aggregate as in landings, cover slabs (for manholes etc.),chajjas, shelves and similar articles with plain faces set in CM 1:4 complete plain fair faces, including cham fers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

M & L for preparation of new plaster surfaces of walls/ceiling and applying two coats of oil emulsion distemper (white/tinted) all as specified.

RAMAN CONSTRUCTION CO (BID ID -3360661)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3353797)

jyoti parkash sharma (BID ID -3361145)

RAJ MOHD (BID ID -3361276)

vijay constrction co (BID ID -3360804)

M/S Ashok Kumar Jaswal (BID ID -3360467)

khajuria builders (BID ID -3361067)

M/S IMRAN MAJID (BID ID -3360454)

VIRINDER SINGH (BID ID -3360608)

JINDAL BUILDERS (BID ID -3360436)

PARDEEP SHARMA (BID ID -3360135)