Restoration of Rain Damages to LIS Hunera in Tehsil Bhattiyat Distt Chamba HP SH Construction of RCC Collection Tank and laying jointing and testing of HDPE pipe of 180mm dia 80 Rmt

Excavation in earth work and disposal of all excavated earth such as pick work, jumper work, blasting work in hard/ soft rocks, including dewatering in saturated soil upto all leads and lifts disposed earth to be levelled and neately dressed within all leads and lifts as per the direction of Engineer-in -Charge.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge.

Providing form work with steel plates 3.15 millimeter thick welding with angle iron in frame 30x30x5 millimeter, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floor etc. up to 200 millimeters in thickness within all leads and lifts as per the direction of Engineer -in- Charge.

Providing and laying cement concrete work 1 : 1. 50 : 3 ( 1 cement : 1.50 sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundations, footings bases of columns and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charge.

In Walls (any thickness but not exceeding 0.10 meter thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level within all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying cement concrete work 1 : 2 :4 ( 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing & shelves and their support balconies, beams, girders, resumes and cantilever up to floor two level within all leads and lifts as per the direction of Engineer-in-Charge.

Providing Tor steel reinforcement for RCC.work including bending, binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in- Charge.

Laying, jointing and testing of HDPE pipe , with pipe fitting PE-80 PN-4.0 ,SDR-26 IS 4984-2016 with upto date ammendments (earth work in trenches to be measured and paid for separately ) including entire carriage of materials within all leads and lifts as per direction of Engineer -in- Charge .of the following nominal bores.

HDPE pipe 150 mm dia

Laying, jointing in trenches galvanized mild steel tube, tube fitting (light grade) (earth work in trenches to be measured and paid for separately ) including entire carriage of materials within all leads and lifts as per direction of Engineer -in- Charge of the following nominal bores.

100 mm dia Nominal bore.

Providing & fixing of Cast Iron Sluice Valve without flange of following dia Class PN 1.6 including cost of rubber inspection washer ( Gasket ) etc. open end with hand wheel confirming to IS: 14846 having test pressure of 10.20 Kg/Sqcm of leader/Kirloskar make complete in all respect.

100mm dia nominal size